• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3B
• /
• pp.224-236
• /
• 2003

MANET(Mobile Ad hoc networks) is a mobile, multi-hop, and wireless network which is bandwidth constrained, energy constrained, resource constrained, autonomous, and self operating systems with dynamic topology. These constraints make the routing between communicating nodes in ad hoc networks difficult. In this paper we survey several routing protocol for mobile ad hoc networks. Especially, we focus on Zone Routing Protocol, hybrid routing framework suitable for a wide of mobile ad hoc networks and analyze performance of ZRP. In the case of ZRP protocol, it is essential that the use of optimal zone radius for efficient use. Otherwise it was proved through an simulation that performance of whole network is rapidly decrease with greatly increasing overhead of ZRP traffic that need for transmission of packet by IARP or IERP traffic. Also we suggest the process of finding QoS path that use in-band signal for QoS routing in ad hoc network. This method guarantees route that make real time multimedia service for QoS enabled path.

• KNOM Review
• /
• v.23 no.1
• /
• pp.34-42
• /
• 2020

Network Function Virtualization (NFV) environment can deal with dynamic changes in traffic status with appropriate deployment and scaling of Virtualized Network Function (VNF). However, determining and applying the optimal VNF deployment is a complicated and difficult task. In particular, it is necessary to predict the situation at a future point because it takes for the process to be applied and the deployment decision to the actual NFV environment. In this paper, we randomly generate service requests in Multiaccess Edge Computing (MEC) topology, then obtain training data for machine learning model from an Integer Linear Programming (ILP) solution. We use the simulation data to train the machine learning model which predicts the optimal VNF deployment in a predefined future point. The prediction model shows the accuracy over 90% compared to the ILP solution in a 5-minute future time point.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1147-1161
• /
• 2023

The Internet of Things (IoT) requires a new processing model that will allow scalability in cloud computing while reducing time delay caused by data transmission within a network. Such a model can be achieved by using resources that are closer to the user, i.e., by relying on edge computing (EC). The amount of IoT data also grows with an increase in the number of IoT devices. However, building such a flexible model within a heterogeneous environment is difficult in terms of resources. Moreover, the increasing demand for IoT services necessitates shortening time delay and response time by achieving effective load balancing. IoT devices are expected to generate huge amounts of data within a short amount of time. They will be dynamically deployed, and IoT services will be provided to EC devices or cloud servers to minimize resource costs while meeting the latency and quality of service (QoS) constraints of IoT applications when IoT devices are at the endpoint. EC is an emerging solution to the data processing problem in IoT. In this study, we improve the load balancing process and distribute resources fairly to tasks, which, in turn, will improve QoS in cloud and reduce processing time, and consequently, response time.

• Land and Housing Review
• /
• v.14 no.2
• /
• pp.97-107
• /
• 2023

This study examined how to better provide quality temporary housing for people in the event of natural and social disasters. Design for Manufacture and Assembly (DfMA) is suitable for creating an efficient planning model for the mass production and transport of a modular house. The proposed DfMA model has the following three characteristics. First is the division of the modular house into service modules and functional modules and to create diversity by developing standard parts and multi-functional parts. Second is a flexible layout suitable for various site conditions. Such flexible layouts would allow identical homes to be mass produced and deployed to a variety of locations, both nationally and internationally. Third is to simplify and minimize the automation process with dry construction to increase production efficiency. Application of this DfMA design method can lead to reduced construction time and cost and improve housing quality.

• Information Systems Review
• /
• v.23 no.1
• /
• pp.135-154
• /
• 2021

In the network economy, the informatization of Small and Medium enterprises(SME) plays an important role in determining productivity while being competitive in the businesses. Informatization of SME has become important along with the recent trend of the fourth industrial revolution. Based on the IT Business Value Model, this study analyzes the key factors of information service of SME with the structure model. In addition, multi-level model was conducted by dividing the layers according to the size of the SME. The analysis confirmed that complementary organizational resources are a key factor in determining the informatization of SME. In addition, the effect of informatization of SME on the scale of SME varies depending on the type of entry into the industrial complex.

• Journal of Service Research and Studies
• /
• v.14 no.2
• /
• pp.1-17
• /
• 2024

One of the most important decisions for managers in the online banner advertising industry, is to choose the best banner alternative for exposure to customers. Since it is difficult to know the click probability of each banner alternative in advance, managers must experiment with multiple alternatives, estimate the click probability of each alternative based on customer clicks, and find the optimal alternative. In this reinforcement learning process, the main decision problem is to find the optimal balance between the level of exploitation strategy that utilizes the accumulated estimated click probability information and exploration strategy that tries new alternatives to find potentially better options. In this study we analyze the impact of word-of-mouth effects and the number of alternatives on the optimal exploration-exploitation strategies. More specifically, we focus on the word-of-mouth effect, where the click-through rate of the banner increases as customers promote the related product to those around them after clicking the exposed banner, and add it to the overall reinforcement learning process. We analyze our problem by employing the Multi-Armed Bandit model, and the analysis results show that the larger the word-of-mouth effect and the fewer the number of banner alternatives, the higher the optimal exploration level of advertising reinforcement learning. We find that as the probability of customers clicking on the banner increases due to the word-of-mouth effect, the value of the previously accumulated estimated click-through rate knowledge decreases, and therefore the value of exploring new alternatives increases. Additionally, when the number of advertising alternatives is small, a larger increase in the optimal exploration level was observed as the magnitude of the word-of-mouth effect increased. This study provides meaningful academic and managerial implications at a time when online word-of-mouth and its impact on society and business is becoming more important.

• Journal of Distribution Science
• /
• v.13 no.9
• /
• pp.81-93
• /
• 2015

Purpose - "Showrooming" refers to the phenomenon where a shopper visits a store to see and compare products but makes the purchase online at a lower price. Surveys on showrooming activities at home and abroad indicate that a significant number of consumers pursue showrooming activities. The advent of "showroomers," who engage in buying activities, hovering both on and offline, while selectively choosing sales channels to suit their needs, is powerful enough to erode the borders between channels and bring about seismic changes in the distribution industry. However, surprisingly, there has been no in-depth discussion on showrooming. This study seeks to theoretically investigate what impact personal characteristics have on showrooming preferences and attitudes in a multi-channel environment. Specifically, assumptions have been made that price perception, perceived performance risk, and trust in online shopping not only have a direct impact on showrooming attitudes but also indirectly affect it through the means of contact motivation. Research design, data, and methodology - To test the hypotheses, this study conducted a survey of male and female shoppers, ages 20 through 40s, who live in metropolitan areas, and have actively showroomed fashion items in the last six months. A clothing item usually purchased after a careful decision-making process was chosen as the target product of the study. The survey was conducted between October and November 2014, using a professional survey service provider. A total of 200 surveys were collected, of which 198 were used for analysis. Conceptual model Structural Equation Modeling (SEM) and Amos 18.0 were employed for data analysis and model verification. In addition, following the confirmatory factor analysis and measurement model analysis, the theoretical model that corresponds to the research model was analyzed. Results - Analysis results show that price perception, perceived performance risk, and trust in online shopping have a statistically significant and positive (+) impact on showrooming attitudes. In addition, in terms of the indirect influence of price perception and perceived performance risk on showrooming attitudes through means of contact motivation, price perception had a statistically significant and positive impact on means of contact motivation, whereas perceived performance risk did not have a statistically significant impact on it, with the relevant hypothesis rejected. Conclusions - These analysis results imply that the ultimate goal of consumers is to maximize their shopping benefits by selectively and strategically taking advantage of different channels in a complementary manner. This study presents many implications for distributors to encourage a deep understanding of showrooming consumers who have complicated consumption behaviors and to build channel integration strategies. This study has limitations in theoretical and practical implications. Therefore, subsequent studies need to focus on verifying that showrooming activities are based on reasonable and planned decisions by applying the theory of reasoned or planned behavior. In addition, the scope of the study should expand to include web showrooming, where consumers conduct product research online and purchase offline.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.579-584
• /
• 2017

The damper oil seal of a high-speed railway vehicle is made from nitrile butadiene rubber (NBR) in order to prevent lubricant from leaking into the damper and to stop harmful contaminants from entering the external environment while in service. Oil leakage through the seal primarily occurs from fatigue failure of the damper. Cumulative damage of the seal occurs due to the contact force between the rod and the rubber during movement due to track irregularities and cants, among other factors. Thus, the design of the oil seal should minimize the maximum principal strain at weak points. In this study, the optimal cross section of the damper oil seal was found using the multi-island genetic algorithm method to improve the durability of the damper. The optimal shape of the oil seal was derived using process automation and design optimization software. Nonlinear material properties for finite element analysis (FEA) of the rubber were determined by Marlow's model. The nonlinear FEA confirmed that the maximum principal strain at the oil leakage point was decreased 24% between the initial design and the optimum design.

• Korean Journal of Remote Sensing
• /
• v.13 no.1
• /
• pp.13-30
• /
• 1997

Recent improvements of satellite remote sensing sensors which are represented by hyperspectral imaging sensors and high spatial resolution sensors provide a large amount of data, typically several hundred megabytes per one scene. Moreover, increasing information exchange via internet and information super-highway requires the developments of more active service systems for processing and analysing of remote sensing data in order to provide value-added products. In this sense, an advanced satellite data processing system is being developed to achive high performance in computing speed and efficieney in processing a huge volume of data, and to make possible network computing and easy improving, upgrading and managing of systems. JAVA internet programming language provides several advantages for developing software such as object-oriented programming, multi-threading and robust memory managent. Using these features, a satellite data processing system named as GeoPixel has been developing using JAVA language. The GeoPixel adopted newly developed techniques including object-pipe connect method between each process and multi-threading structure. In other words, this system has characteristics such as independent operating platform and efficient data processing by handling a huge volume of remote sensing data with robustness. In the evaluation of data processing capability, the satisfactory results were shown in utilizing computer resources(CPU and Memory) and processing speeds.

• Journal of Korean Society of Archives and Records Management
• /
• v.4 no.2
• /
• pp.118-162
• /
• 2004

Archival description in archives has an important role in document control and reference service. Archives has made an effort to do archival description. But we have some differences and problems about a theory and practical processes comparing with advanced countries. The serious difference in a theory is that a function classification, maintenance of an original order, arrangement of multi-level description are not reflected in practical process. they are arranged in shelves after they are arranged by registration order in a unit of a volume like an arrangement of book. In addition, there are problems in history of agency change or control of index. So these can cause inconvenience for users. For improving, in this study we introduced the meaning and importance of arrangement of description, the situation and problem of arrangement of description in The National Archives, and a description guideline in other foreign countries. The next is an example for ISAD(G). This paper has chapter 8, the chapter 1 is introduction, the chapter 2 is the meaning and importance of arrangement of description, excluding the chapter 8 is conclusion we can say like this from the chapter 3 to the chapter 7. In the chapter 3, we explain GOVT we are using now and description element category in situation and problem of arrangement of description in Archives. In the chapter 4, this is about guideline from Archives in U.S.A, England and Australia. 1. Lifecycle Date Requirement Guide from NARA is introduced and of the description field, the way of the description about just one title element is introduced. 2. This is about the guideline of the description from Public Record Office. That name is National Archives Cataloguing Guidelines Introduction. We are saying "PROCAT" from this guideline and the seven procedure of description. 3. This is about Commomon Record Series from National Archives of Australia. we studied Registration & description procedures for CRS system. In the chapter 5, This is about the example which applied ISAD to. Archives introduce description of documents produced from Appeals Commission in the Ministry of Government Administration. In the chapter 6, 7. These are about the problems we pointed after using ISAD, naming for the document at procedure section in every institution, the lack of description fields category, the sort or classification of the kind or form, the reference or identified number, the absence description rule about the details, function classification, multi-level description, input format, arrangement of book shelf, authority control. The plan for improving are that problems. The best way for arrangement and description in Archives is to examine the standard, guideline, manual from archives in the advanced countries. So we suggested we need many research and study about this in the academic field.