• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.187-190
• /
• 2002

In contrast to conventional electromagnetic motor, USM(Ultrasonic Motor), as piezoelectric ceramic applying ultrasonic mechanical vibration and as frictional-movement type motor, get rotational torque by elastic friction between stator and rotator, The USM, which is small motor without iron cores and coil as a simple structure, has little load weight, has character of high torque at low speed, and can apply a direct drive type without deceleration gear as low speed type. A response of USM from control input is satisfactory, and also generates much torque in low speed driving, and holding torque is much without supplying power. In this study, I designed and made Ultrasonic motor-digital multi controller(USM- DMC) using FPGA chip, A54SX72A made in Actel Corporation. By the minute, USM-DMC can control frequency, duty ratio, and phase difference of USM by llbit digital input from Pc. Therefore, when we use this controller, we can apply to typical parameter, frequency, phase difference, and voltage parameter, to control as well as we can do mixing control like phase-frequency, phase-voltage, frequency-voltage, frequency-phase-voltage, What is more, the strongest point is that it can trace frequency based on optimized frequency because we can input optimized resonant frequency while in motoring.

• Smart Media Journal
• /
• v.4 no.3
• /
• pp.38-43
• /
• 2015

The increased number of smart devices leads users to share multimedia contents with others. Smart device users transmit multimedia files using apps. For multimedia file transfer under NAT (Network Address Translator), a lot of apps exploit a server with public IP or short range communication technologies such as WiFi Direct or Bluetooth because smart devices with private IP address cannot communicate each other directly. We first proposed the push service based file transmission scheme without an additional server and distance limitation. Second, for the push service based transmission, we proposed congestion control scheme to adapt transmission rate to the receiver's link bandwidth. Third, we considered bandwidth aware transmission for senders with different bandwidth. We implemented apps to evaluate the proposed scheme, and conducted experiments with smart devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1924-1929
• /
• 2007

Nowadays, a lot of related data obtained from these research could be given a new present meaning to accomplish the original purpose of the whole research as a human project. The method of tumor classification based on microarray could contribute to being accurate tumor classification by finding differently expressing gene pattern statistically according to a tumor type. Therefore, the process to select a closely related informative gene with a particular tumor classification to classify tumor using present microarray technology with effect is essential. In this thesis, we used cDNA microarrays of 3840 genes obtained from neuronal differentiation experiment of cortical stem cells on white mouse with cancer, constructed accurate tumor classification model by extracting informative gene list through normalization separately and then did performance estimation by analyzing and comparing each of the experiment results. Result classifying Multi-Perceptron classifier for selected genes using Pearson correlation coefficient represented the accuracy of 95.6%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.2
• /
• pp.542-558
• /
• 2023

A digital focus index (DFI) is a value used to determine image focus in scientific apparatus and smart devices. Automatic focus (AF) is an iterative and time-consuming procedure; however, its processing time can be reduced using a general processing unit (GPU) and a multi-core processor (MCP). In this study, parallel architectures of a minimax search algorithm (MSA) are applied to two DFIs: range algorithm (RA) and image contrast (CT). The DFIs are based on a histogram; however, the parallel computation of the histogram is conventionally inefficient because of the bank conflict in shared memory. The parallel architectures of RA and CT are constructed using parallel reduction for MSA, which is performed through parallel relative rating of the image pixel pairs and halved the rating in every step. The array size is then decreased to one, and the minimax is determined at the final reduction. Kernels for the architectures are constructed using open source software to make it relatively platform independent. The kernels are tested in a hexa-core PC and an embedded device using Lenna images of various sizes based on the resolutions of industrial cameras. The performance of the kernels for the DFIs was investigated in terms of processing speed and computational acceleration; the maximum acceleration was 32.6× in the best case and the MCP exhibited a higher performance.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.321-331
• /
• 2000

Multiple 15-hue tests were designed and implemented on a PC in the study so as to quickly and quantitatively evaluate color vision acuity. Difficulty of the test was control)ed by the value of CDBACC (color difference between adjacent color chips) calculated using a CIELAB formula. The multiple 15-hue tests consist of eight of the hue tests (test 3-10) and three of the basic color (red, green, blue) tests (test 11-13). The 15 colors used for the hue tests were specified by the 15 color coordinates that were located at a constant distance (d = 2. 3. 5. 7, 10, 20, 30. 40) from white reference in the CIE chromaticity coordinate system and were separated by a constant color difference (CDBACC = 0.75, 1.1, 1.8. 2.5. 3.5. 7.5. 11, 14) from the adjacent chips. The color coordinates for the 15 chips for the basic color tests were the same as those of the 15 points spaced equally by a constant color difference (6.87 for the green color test. 7.27 for the red color test, 7.86 for the blue color test) from the white reference along the axis of red, green and blue. Thirty normal subjects who were not color blind were taken to undergo the multiple 15-hue tests. It was observed that most of the subjects correctly arranged color chips for the tests with CDBACC greater than 5, whereas no one correctly answered for those with CDBACC less than 2. Rapid changes in the number of the subjects correctly arranged took place when CDBACC of the tests was between 2 and 4.5. In the basic color tests, unlike the hue tests having similar values of CDBACC, it was seen that the subjects arranged color chips even less correctly. It was found that JNCD (just noticeable color difference) - a measure of color vision acuity was about 3 in average for the subjects. The JNCD was chosen as the value of the CDBACC of the test for which about $50\%$ of the subjects failed to successfully arrange color chips. ERCCA (error rate of color chips arrangement) for the test with CDBACC the same as the JNCD was shown to be about $20\%$. It is expected that the multi 15-hue tests implemented on a PC in the study will be an economical tool to quickly and quantitatively evaluate color vision acuity and, accordingly, the tests can be used for early diagnosis to massive potential patients suffering from diseases (ex. diabetes, glaucoma) which may induce changes in color vision acuity.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.21-24
• /
• 2001

In this paper, we present a fast face detection algorithm by estimating the eye region using neural network. To implement a real time face detection system, it is necessary to reduce search space. We limit the search space just to a few pairs of eye candidates. For the selection of them, we first isolate possible eye regions in the fast and robust way by modified histogram equalization. The eye candidates are paired to form an eye pair and each of the eye pair is estimated how close it is to a true eye pair in two aspects : One is how similar the two eye candidates are in shape and the other is how close each of them is to a true eye image A multi-layer perceptron neural network is used to find the eye candidate region's closeness to the true eye image. Just a few best candidates are then verified by eigenfaces. The experimental results show that this approach is fast and reliable. We achieved 94% detection rate with average 0.1 sec Processing time in Pentium III PC in the experiment on 424 gray scale images from MIT, Yale, and Yonsei databases.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.339-342
• /
• 2000

본 논문에서는 DSP와 RISC 마이크로 콘트롤러의 결합으로 구성된 이중 코어 DSP를 이용하여 휴대장치에 적합한 저전력 MPEC-2 계층-III 복호화기의 구조를 제안하고 실시간 시스템을 구현하였다. 제안된 시스템은 디지털 오디오 데이터 처리부와 시스템 제어 정보처리부로 나누어 병렬처리가 가능한 구조이다. 디지털 오디오데이터 처리부에서는 DSP의 강력한 산술연산기능으로 MPEG 복호화 알고리듬을 수행하며 시스템 제어부에서는 마이크로 콘트롤러의 장점인 저가, 저전력의 제어 기능으로 사용자 인터페이스 및 파일 관리, 비트스트림 제어를 담당하도록 구성된다. 입력부에서는 Multi Meadia Card(MMC)를 지원하고, PC와 호환 가능하도록 파일 관리 시스템으로 운용되며 직렬 통신의 데이터 전송과 16비트 해상도 및 최대 48kHz 표본화주파수로 스테레오 출력이 가능하다. 구현된 시스템은 이중 코어를 이용하여 DSP의 연산량 및 동작속도의 감소로 인한 저가, 저전력의 효과로 인해 휴대장치에 적합하다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.110.1-110.1
• /
• 2016

국내외 최첨단 반도체 및 평판 디스플레이 공정에서 필요한 개별 건식 진공펌프들의 자기진단을 통한 예지보수의 실시간 구현 장치 개발과제의 2차년 전반기 수행된 연구결과의 일부를 본 논문에서 소개한다. 본 연구에서 최종 목표로 설정하고 있는 "smart" 진공펌프란 운전상태에 관련된 변수들의 측정치를 기반으로 한 자기진단 (self-diagnostics) 기능을 내장한 차세대 공정용 진공펌프를 의미한다. 1차년에 선정된 상태진단용 진공펌프의 상태변수(state variable)들의 효과적인 수집을 구현하기 위한 연구가 진행되었다. 기존의 반도체 공정용 진공펌프들에서 측정하고 있는 상태변수로는 온도, 유량, 배기관 압력, 모터 소비전류 등과 같은 정적인 변수들뿐 아니라, 회전기계류의 상태진단에 필수적인 진동신호를 추가한 상태 변수 수집 장치를 개발하였다. 본 연구팀은 진공펌프의 회전진동을 유발하는 대표적인 부품은 회전체, 베어링, 그리고 치차로 이들 3 종의 회전진동성분들을 효과적으로 측정할 수 있는 신호처리 기법을 개발하였다. 금번 연구에서 채택한 진동신호 처리기법은 초고속 FFT 변환 기반의 주파수 대역 별 진동 레벨 환산과 더불어 다단계로 구성된 디지털 필터 (multi-staged decimation filter) 기법을 개발 적용하였다. 이러한 신호처리 기법을 통하여 측정된 진동 신호로부터 회전체, 베어링, 그리고 치차의 회전 진동성분을 효과적으로 측정하는 방법을 금번 학술대회에서 소개한다. 그리고, 진공펌프 상태진단에 필요한 상태변수의 실시간 backup 방법, 그리고 공정관리 server와 통신기능, 그리고 펌프 현장 관리자용 PC와 통신 기법 등 상태변수 측정 모듈의 확장성에 대한 기술적 내용을 소개한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1074-1083
• /
• 1993

NC simulation has been used to replace the test cutting of NC machining. Although it can reduce the NC part programming effort, it still has a problem. If any error is found during the simulation, then the part has to be reprogrammed and it is time consumming. This paper presents a method for verifying and editing the NC code after the post-processing without going back to the part programming stage. A data structure and an algorithm to verify and edit the NC code interactively with the aid of graphics is introduced. Z-map method is used for the shaded image display and cross-sectional view display of the macined parts. The method was implemented in a IBM/PC-386 with MS-Windows software, and the multi-window function of the of the MS-Windows is used for the simultaneous editing and verification.

• Journal of the Korean housing association
• /
• v.16 no.6
• /
• pp.29-38
• /
• 2005

Housing consumers prefer high-rise mixed-use apartments because of one-stop living style, and high quality of life. This study investigated the residents community with the residents who lived in the apartments and the future residents who will live in the apartments to investigate the usage of the public spaces and the influence of the space to form housing culture of residents family community. All data were taken from the response of two hundred forty three questionnaire to be gathered during 20th of June through 24th of August in 2003. Data were analyzed with percentages, means, t-test, and variance analysis using SPSS/PC+. Residents in four high-rise mixed-use apartments feels that the public space in the apartments were mainly provided by their convenience of the construction companies not for the residents. Physical conditions of public space in high-rise mixed-use apartments should be environmentally friendly housing space in which nature and human can be coexisted. It also should be high-tech system housing with which SOHO can be operated. And different custom-made spaces which the residents' needs can be satisfying should be provided. The public space should be recommended to be multi-purposed room because the space will be differentiated with the circumstances of the area, the residents' age differences, and the variety of the family's life style. Moreover, the various programs should be supplied to run the public space efficiently.