• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1088-1095
• /
• 2019

The information and communication technology that is being developed recently has been greatly influencing the automobile market. In recent years, devices equipped with IT technology have been installed for the safety and convenience of the driver. However, it has the advantage of increased convenience as well as the disadvantage of increasing traffic accidents due to driver's distraction. In order to prevent such accidents, it is necessary to develop safety systems of various types and ways. In this paper implements a platform that can recognize LDWS and FCWS and PDWS by using a single camera without using radar sensor and camera fusion and stereo camera method using two or more sensors, and proposes to study multi-function driving safety platform using a single camera by analyzing recognition rate evaluation and validity on a vehicle.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.5
• /
• pp.29-36
• /
• 2019

In modern society in which the fourth industrial revolution has come to the fore and rapid technology innovations are taking place, a phenomenon of making and selling small quantities of various products that consumers want instead of mass producing one item has emerged. As the market is moving toward the multi-item small-sized production system, there is a need for a system in which a machine independently judges and carries out machining and post-processing. In order for a machine to judge processing on its own, it is necessary to measure the force applied to a product. This study aimed to develop a large-scale dynamometer that enables three-axis measurement using octagonal ring load cells. As for the device's configuration, four octagonal ring load cells, which were previously researched, were used to enable three-axis measurement. It was reconfigured by modifying the attachment position of the octagonal ring load cells' strain gauge and the Wheatstone bridge of each axis, and a system was set up to allow the monitoring of data measured through the monitor. The configured device calculated a strain rate by an experiment, and this rate was compared with the theoretical strain rate to find a correction value. The correction value was entered into a formula, deriving a modified formula. The modified formula was entered into the device, which completed the large-scale dynamometer.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.1
• /
• pp.133-143
• /
• 2021

In government procurement programs, cost estimation and analysis support funding decisions and are the basis for other major decisions, too. Such estimating and analyzing the cost of the weapon systems are crucial in execution of the defense budget. However, existing cost estimations and analyses have focused on domestic R&D projects, thus those are not valid in application to foreign weapon acquisitions. This study aims at foreign weapon systems that are acquired from Direct Commercial Sales. Because the data for price estimation of a foreign weapon is usually not available, we suggest a price estimation model based on performance factors of the weapon. In this study, the proper price of the weapon system is estimated using the parametric cost estimating model. Using the data of helicopter-launched anti-tank guided missiles worldwide, we analyze the effect of each performance factor on the weapon system price by regression analysis, and use step-wise and ridge regression analysis to remove multi-collinearity. This study hopefully contributes to more reasonable decision making on proper price of weapons.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.5
• /
• pp.1004-1018
• /
• 2020

Advances in e-commerce enable consumers to shop efficiently for fashion products in global markets in addition, the market size of purchasing directly from foreign websites are also increasing. This study investigates the effects of hedonic and utilitarian shopping values on the continuous use intention of online cross-border shopping. Curiosity and self-efficacy were introduced as mediating variables between shopping values and user intentions. A web-based survey is conducted on female consumers, who have experiences to buy fashion products by online cross-border shopping. A total of 472 responses were collected from a panel of online survey firms. Data are analyzed using confirmatory factor analysis, structural equation modeling, and multi-group SEM by AMOS 21.0. According to the results of the structural equation model test, hedonic value affected continuous use intention of online cross-border shopping as mediated by curiosity and self-efficacy; in addition, utilitarian value influenced self-efficacy, which mediated relations between the utilitarian value and the continuous use intention. The research model was also tested to compare heavy users and light users of online cross-border shopping. For heavy users, the effect of hedonic value on curiosity was significantly stronger than for light users. Several implications are suggested based on the results.

• International Area Studies Review
• /
• v.13 no.2
• /
• pp.505-523
• /
• 2009

We study the cost of capital of Islamic enterprise using the Capital Asset Pricing Model(CAPM). When there exists no risk-free interest rate, the security market line(SML) of Islamic enterprise shows an upward slope starting from the origin. The slope is bigger than that of SML with risk-free interest rate. This is because the cost of capital of Islamic enterprise is higher than that of western firms for the same level of systematic risk. When the effect of zakat is considered, the risk-free interest rate is replaced by minimum required rate of return. The SML of Islamic enterprise reveals an upward slope but it does not pass through the origin. This is because Islamic enterprise cannot invest on risk-free asset. In order to overcome the theoretic limits of CAPM, we propose to use multi-factor approach such as arbitrage pricing model instead of single-factor model for future study.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1502-1520
• /
• 2021

This paper attempts to investigate Korean youth Not in Education, Employment and Training (NEET) and how daily activities and community participation may influence their positive emotions and job search desire. First, we conducted a focus group interview with 16 NEETs who participated in the Kakao NEET Company project. The project allowed participants to experience employment by founding a virtual company in which each participant selected a daily activity to perform as part of the company's operations. Second, the interview responses were categorized and assigned emotional values using the card sorting technique and multi-dimensional analysis (MDS). A total of 11 emotional values were derived through this process. Finally, a social network analysis was conducted in order to measure the density of relations among the emotional values. Results suggest that immersion, confidence, belongingness were the three highest values evaluated by participants. Furthermore, network diagrams imply that the stronger participants perceived social support and belongingness with others, the stronger their responsibility grew, further leading them to establish steady goals. In particular, the high eigenvector score for "desire for job" suggests that emotional values are sequentially connected to the immersion-social support-responsibility-goal-job desire. This sequence suggests that digital services that are developed with the aim to enhance social values such as the Kakao NEET Project may engender motivation and confidence in youth NEETs. The overall results suggest that a systematic approach to policymaking should be considered in order to provide fundamental solutions and expand opportunities for social participation and emotional comfort, as social isolation due to low self-esteem has been reported as one of the reasons for NEETs' failure in the labor market.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.133-141
• /
• 2020

Up to date cosmetic OEM/ODM (original equipment manufacturing/original development manufacturing) industry receives attention as a future growth engine due to steady growth. However, because of limited research and development capability, many companies have employed commercial management platforms specialized for large-sized companies; thus, overall system effectiveness and efficiency is low. Especially, MRP (material requirement planning) system introduced originally in 1970s is employed to calculate the requirement of the parts. However, dynamic nature of production lead time usually results in incorrect requirements. In addition, its algorithm does not consider the capability of the production resources. Also, because the commercial MRP system calculates all subcomponent for fixed period, the more goods have subcomponent, the slower calculation is. Therefore, conventional MRP system cannot respond complicated situation in time. In this study, we will suggest a new method that can respond to complicated situations resulting from short lead time and urgent production order in Korean cosmetic market. In particular, a distributed MRP system is proposed, that consists of multi-functional and operational modules, based on the characteristic of the BOM (bill of material). The distributed MRP system divides components (i.e. products and parts) into several fields and decrease the problem size; thus, we can respond to dynamically changed data any time. Through this solution, we can order components quickly, adjust schedules and planned quantity, and manage stocks reasonably. In addition, a prototype of the distributed MRP system is presented in this paper, in which ERP (enterprise resource planning) sever data is associated with an excel spreadsheet via MSsql. System user interface is implemented by a VBA (visual basic for applications) tool. According to a case study, response rate for delivery and planning achievement rate were enhanced about 20%, and inventory turnover was also decreased. Consequently, the proposed system improves overall profit.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.1
• /
• pp.53-63
• /
• 2022

Objectives: This study was designed to evaluate the filtration efficiency, inhalation resistance, and liquid resistance of commercial reusable masks in comparison to the performance of KF-AD masks (reference masks). Methods: Thirty-six masks were purchased from an online market. Filtration efficiency and inhalation resistance were determined in the same manner as in MFDS certification testing, respectively using TIL/IL & Filter Test 1300S (SFP Services, UK) and Breathing Resistance Analyzer DA2001 (Lambda Ray, South Korea). Results: Most of the filtration efficiencies found for the 19 masks were far lower than the test standard for KF-certified masks. Four masks met KF94 and three masks even met KF80. Most inhalation resistances were also much lower than the standard, with many almost one-half of the standard. In addition, all the masks except KF-AD masks did not pass the liquid resistance test. Conclusions: Although most of the filtration efficiency performance results found in this study for the reusable masks, which emerged as an alternative, were lower than the standard for health masks, multi-use masks can be used with a replacement filter inserted.

• Journal of the Korean Institute of Rural Architecture
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2023

This is a case study of private sector's development of long-term unexecuted urban parks in Pohang through a special act, which provides a guideline of 30% of land for non-park while 70% of land for park. The strategy has a lot of validity in many respects along with the urban planning sunset system, but even with the special act it would not easy to be implemented in Pohang, where the guideline has been modified to 20% for non-park, mostly multi-family housing projects while 80% for park. Thus, participation of private companies would be discouraged due to low commercial validity. Also, there would exist various risks because the project would be completed through a long-term decision-making and execution process. Thus, this study argues that it would be better for Pohang to follow the original guideline of the government for better implementation of the projects, along with preparation of a law with which the government be able to recoup excess profits when too much profits would be given to private developers. For the project implemented smoothly, it is also important to understand local housing market and fluctuating economic conditions, and to prepare various incentives for private companies. In addition, to secure publicity, guidelines on the level of publicity of the project should be prepared through negotiation by parties to prevent the project being discouraged too much.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.182-182
• /
• 2023

Since China adopted Public Private Partnerships (PPPs) in the 1980s, China has relied on water PPPs to expand appropriate water facilities.. According to the World Bank data from 1994 to 2020, the top five provinces hosted over 40 percent of total PPPs, with four of them located in the Huadong area and one in the Henan area. A vast gap exists between the group attracting the most PPPs and the group hosting the least. This study explores Guangdong and Shandong provinces, which have led most PPPs in China. Coincidently, these areas are also famous for the typical areas to show the Chinese economic policy after the open-door policy. They have achieved economic development and rapid urbanization rates based on the large scale of Foreign Direct Investment inflow and export-oriented manufacturing industry, as well as their active participation in PPPs over the last thirty years. An economic approach can provide valuable insights into the development of water infrastructure. Adequate urban infrastructure has been shown to impact local economic development positively. Water infrastructure also provides a basic and sustainable environment for economic activities by satisfying more water usage, improving the efficiency of the water supply, and reducing water pollution caused by industrial activities. However, it remains only partially understood without inclusive research on the issues related to water resources in each province. For instance, existing studies have been limited to explaining slightly different patterns of water PPPs between Guangdong and Shandong at the beginning of the PPP era. This study aims to elucidate the development pattern of water PPPs in each province from multi-dimensional aspects. Therefore, the study will help understand why China boosted the development of the private water market.