• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.123-127
• /
• 2021

Millimeter-wave tracking radars should be operated in various environmental restrictions, thus they demand more computing power and smaller size compared to conventional tracking radars. This paper presents the design and implementation of the compact power supply for millimeter-wave tracking radar applications. To meet requirements of low voltage/high current and voltage accuracy for FPGA/DSP digital circuits, Point of Load (POL) converters are used in order to enhance power density and system efficiency. LDO (Low Dropout) is applied for the output voltage under the light load condition, then the single-input-multi-output power supply with max power of 375 W and 8 outputs is developed. The proposed power supply achieves output voltage accuracy of ±2 % and noise level of <50 mVpp % under full load conditions.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.659-665
• /
• 2017

In this paper, a low complexity fast Fourier transform(FFT) processor is proposed for multiple input multiple output(MIMO) systems. The IEEE 802.11ac standard has been adopted along with the demand for a system capable of high channel capacity and Gbps transmission in order to utilize various multimedia services using a wireless LAN. The proposed scalable FFT processor can support the variable length of 64, 128, 256, and 512 for 8x8 antenna configuration as specified in IEEE 802.11ac standard with MIMO-OFDM scheme. By reducing the required number of non-trivial multipliers with mixed-radix(MR) and multipath delay commutator(MDC) architecture, the complexity of the proposed FFT processor was dramatically decreased. Implementation results show that the proposed FFT processor can reduced the logic gate count by 50%, compared with the radix-2 SDF FFT processor. Also, compared with the 8-channel MR-2/2/2/4/2/4/2 MDC processor and 8-channel MR-2/2/2/8/8 MDC processor, it is shown that the gate count is reduced by 18% and 17% respectively.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.13-21
• /
• 2014

This study on condominium complex will adopt the quantitative assessment of the influence on the environment throughout the entire life cycle of buildings. This paper applies input-out analysis in order to analyse embodied energy regarding input of materials at material production phase. Also, it calculates environment load at use and demolition and destruction Phases of buildings as analysing energy consumption. The study categorises environment load as six impact categories and undertakes environmental impact evaluation. The consequence shows that the environment load of multi-unit dwelling takes up 88.2% out of the entire environment load of condominium complex. Also, as a result of analyzing the environmental impact of the life cycle of condominium buildings, it was found that such environmental impact comprised of about 11.96% of all industries in Korea that had an environmental impact.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.4
• /
• pp.87-94
• /
• 1999

This paper presents a study on the off-line handwritten Hangul (Korean) character recognition using the partially connected neural network (PCNN), which is based on partial connections between the input receptive fields and the hidden nodes. The hidden nodes of three PCNNs have ten receptive fields and different input feature sets. And we introduce modular partially connected neural network (MPCNN), The MPCNN combines three PCNNs with a merging network. The learning scheme of the proposed networks is composed of two steps: PCNN learning step and the merging step of combining three PCNN s. In the merging step, another merging PCNN network is introduced and trained by regarding the hidden output of each PCNN as a new input feature vector. The performance of the proposed classifier is verified on the recognition of 18 off-line handwritten Hangul characters widely used in business cards in Korea.

• Journal of Drive and Control
• /
• v.14 no.2
• /
• pp.30-36
• /
• 2017

This paper presents a sliding mode observer-based fault detection algorithm for steering inputs of an all-terrain crane. All-terrain cranes with multi-axles have several steering modes for various working purposes. Since steering angles at the other axles except the first wheel are controlled by using the information of steering angle at the first wheel, a reliable signal of the first axle's steering angle should be secured for the driving safety of cranes. For the fault detection of steering input signal, a simplified crane model-based sliding mode observer has been used. Using a sliding mode observer with an equivalent output injection signal that represents an actual fault signal, a fault signal in steering input was reconstructed. The road steering mode of the crane's steering system was used to conduct performance evaluations of a proposed algorithm, and an arbitrary fault signal was applied to the steering angle at the first wheel. Since the road steering mode has different steering strategies according to different speed intervals, performance evaluations were conducted based on the curved path scenario with various speed conditions. The design of algorithms and performance evaluations were conducted on Matlab/Simulink environment, and evaluation results reveal that the proposed algorithm is capable of detecting and reconstructing a fault signal reasonably well.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.5
• /
• pp.355-361
• /
• 2000

A recycling reactor system operated under sequential anoxic and oxic conditions for the treatment of swine wastewater has been developed, in which piggery slurry is fermentatively and aerobically treated and then part of the effluent is recycled to the pigsty. This system significantly removes offensive smells (at both the pigsty and the treatment plant), BOD and others, and may be cost effective for small-scale farms. The most dominant heterotrophic were, in order, Alcaligenes faecalis, Brevundimonas diminuta and Streptococcus sp., while lactic acid bacteria were dominantly observed in the anoxic tank. We propose a novel monitoring system for a recycling piggery slurry treatment system through the use of neural networks. In this study, we tried to model the treatment process for each tank in the system (influent, fermentation, aeration, first sedimentation and fourth sedimentation tanks) based upon the population densities of the heterotrophic and lactic acid bacteria. Principal component analysis(PCA) was first applied to identify a relationship between input and output. The input would be microbial densities and the treatment parameters, such as population densities of heterotrophic and lactic acid bacteria, suspended solids(SS), COD, NH$_4$(sup)+-N, ortho-phosphorus (o-P), and total-phosphorus (T-P). then multi-layer neural networks were employed to model the treatment process for each tank. PCA filtration of the input data as microbial densities was found to facilitate the modeling procedure for the system monitoring even with a relatively lower number of imput. Neural network independently trained for each treatment tank and their subsequent combined data analysis allowed a successful prediction of the treatment system for at least two days.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.118-124
• /
• 2016

In this paper, contribution analysis method using a partial coherence function is dealt with in the case of underwater radiation noise. When performing the contribution analysis using a partial coherence function, it is important to select the order of system input. But in the case of frequency correlated systems, it is very difficult to properly select the order of system input. In order to solve this problem, the contribution analysis is performed by subdividing the area of contribution using multiple coherence function. And the new contribution analysis method is presented by using the relationship between the contribution characteristic matrix and multiple coherence function. In order to validate the new method, calculation is performed about multi-input / single-output model which is composed of sine waves. The result of calculation shows that it is possible to derive the exact contribution values.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1307-1311
• /
• 2006

In this paper, we propose new speech feature parameter using the Matrix Factorization for appearance part-based features of speech spectrum. The proposed parameter represents effective dimensional reduced data from multi-dimensional feature data through matrix factorization procedure under all of the matrix elements are the non-negative constraint. Reduced feature data presents p art-based features of input data. We verify about usefulness of NMF(Non-Negative Matrix Factorization) algorithm for speech feature extraction applying feature parameter that is got using NMF in Mel-scaled filter bank output. According to recognition experiment results, we confirm that proposed feature parameter is superior to MFCC(Mel-Frequency Cepstral Coefficient) in recognition performance that is used generally.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2839-2842
• /
• 2003

The paper is proposed for control signals to operate X-ray detector signal acquisition system There are control signals and synchronized signals for data acquisition system. X-ray detector signal acquisition system is divided into pre-treatment part which is to amplify acquired dual 16 channel analog input, converter pan which is to multiplex, and convert data and transmit part that combine transferred data output and address in order. It also describes detailed control signals.

• Proceedings of the CALSEC Conference
• /
• 1997.11a
• /
• pp.53-58
• /
• 1997

본 논문에서는 통합 Logistics Center라는 새로운 조직을 통해서, 생산, 영업 및 물류를 총괄하여, 전체 공장과 전체 DC/SB의 재고량을 줄이고. 결품현상 방지, 수송비용 절감을 도모할 수 있는 통합 물류 시스템을 구축하는데 필요한 각 Process 및 이를 수행할 수 있는 발견적 해법을 개발하는 것을 연구한다. 생산(공장)에는 가장 정확한 각 DC/SB의 수요 예측량을 토대로 수립된 발주량과, 이 발주량을 통해서 결정된 생산의뢰 계획을 제공한다. 이 생산 계획은 제품이 생산되어서 출고될 때, 근거리 지역에 있는 DC/SB에 출고될 수 있도록, 각 공장의 전용라인에 대해서는 최소 수송비용을 고려한다. 제품의 혼합생산 라인의 정보( 생산 Capa.)를 이용하여 나머지 발주량을 생산 의뢰 계획으로 바꾸게 된다. 공장에서는 이 계획을 바탕으로 생산 계획을 수립하여, 그 계획과 생산된 제품을 DC/SB로 출고시킨다. 공 장의 출하 가능량과 각 DC/SB의 2주전의 발주량은 실제 많은 차이가 발생하므로, 이를 재조정하여, 공장의 재고를 최소로 하는 방향으로 공장의 출하 가능량을 조절한다. 조절된 출하 가능량은 2일간의 근거리 수송 원칙에 의해서 입고될 DC/SB를 결정한다. 공장의 출고를 돕기 위해서 배차계획을 수립한다. 본 연구에서는 각각의 Process Engine들의 활동과 정보의 흐름이 서로 상이한 시간 간격으로 발생할 때 각 Process Engine 의 Input/output으로 사용되는 정보의 효율적인 Systematic 동기화 및 Database와 interface 및 Multi-Tasking Database Transaction을 고려할 것이다.