• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1390-1397
• /
• 2000

This paper presents the multi-channel active vibration control of a flexible plate of the acoustically loaded enclosure. The flexible plate was excited acoustically with sinusoidal and white noise input. The control was performed by two piezo ceramic actuators and two accelerometers. The experimental results were compared with the single channel control results. In the case of white noise input, 20 dB of vibration reduction was achieved below 300Hz frequency range. The experimental results demonstrate that multi-channel filtered-x LMS algorithm is effective than single-channel filtered-x LMS algorithm in active vibration control of plate.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.280-287
• /
• 2016

In this paper, we propose a normalization algorithm that can be applied to adaptive filters for multi-channel active noise control. The FxLMS (Filtered-x Least Mean Square) algorithm for the single-channel active noise control can be normalized in the same way as the NLMS (Normalized Least Mean Square) algorithm, whereas in case of the multi-channel active noise control, the single-channel normalization for the FxLMS algorithm cannot be extended to the normalization for the multi-channel FxLMS algorithm straightforwardly. First, we adopt a generalized normalization algorithm for the multi-channel FxLMS algorithm based on the principle of minimal disturbance and then, proposed a normalized algorithm considering only diagonal elements to avoid computation for matrix inversion. We carried out performance comparisons of the proposed algorithm with other algorithms without normalization. It is shown that the proposed algorithm presents better convergence characteristics under non-stationary environments.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.4
• /
• pp.39-47
• /
• 2020

We propose a multi-access points transmit power control algorithm in consideration of the channel estimation error and the multi-rate service. In the real communication systems, the channel estimation at the receiver side is imperfect due to limited number of pilot symbol usage. Furthermore, the multi-rate service is supported. We theoretically prove the uniqueness and the convergence of the proposed algorithm in multi-rate service environment. The proposed algorithm composes of one inner loop part and one outer loop part. Simulation results show that 1) the inner loop algorithm guarantees convergence of the transmit power level and the multi-rate service, 2) the outer loop algorithm compensates for the channel estimation error.

• Journal of Communications and Networks
• /
• v.18 no.1
• /
• pp.75-83
• /
• 2016

In this paper, we propose a multi-channel medium access control (MAC) protocol, named underwater multi-channel MAC protocol (UMMAC), for underwater acoustic networks (UANs). UMMAC is a split phase and reservation based multi-channel MAC protocol which enables hosts to utilize multiple channels via a channel allocation and power control algorithm (CAPC). In UMMAC, channel information of neighboring nodes is gathered via exchange of control packets. With such information, UMMAC allows for as many parallel transmissions as possible while avoiding using extra time slot for channel negotiation. By running CAPC algorithm, which aims at maximizing the network's capacity, users can allocate their transmission power and channels in a distributed way. The advantages of the proposed protocol are threefold: 1) Only one transceiver is needed for each node; 2) based on CAPC, hosts are coordinated to negotiate the channels and control power in a distributed way; 3) comparing with existing RTS/CTS MAC protocols, UMMAC do not introduce new overhead for channel negotiation. Simulation results show that UMMAC outperforms Slotted floor acquisition multiple access (FAMA) and multi-channel MAC (MMAC) in terms of network goodput (50% and 17% respectively in a certain scenario). Furthermore, UMMAC can lower the end-to-end delay and achieves a lower energy consumption compared to Slotted FAMA and MMAC.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.23-29
• /
• 1995

In this study, Active noise controlis implemented with single channel and multi-channel adaptive algorithm in 3 dimensional reverberant enclosure sound. field, which occurrs in complicated acoustic mode. First, for the one case excited with the resonant frequency of an enclosure, a target of control and the other cases excited with band-pass filtered random noise(100~400Hz), it is implemented to control reducing interior noise of enclosure with single channel and realtime multi-channel adaptive algorithm for global noise reduction in enclosure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.488-501
• /
• 2008

Convergence of various wireless systems can be cost effectively achieved through enhancement of existing technology. The emergence of Wireless Mesh Network (WMN) entails the interoperability and interconnection of various wireless technologies in one single system. Furthermore, WMN can be implemented with multi-radio and multi-channel enhancement. A multi-radio, multi-channel wireless mesh network could greatly improve certain networking performance metrics. In this research, two approaches namely, clustering and topology control mechanisms are integrated with multi-radio multi-channel wireless mesh network. A Clustering and Topology Control Algorithm (CTCA)is presented that would prolong network lifetime of the client nodes and maintain connectivity of the routers.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.8
• /
• pp.375-377
• /
• 2006

An adaptive IIR filter in ANC(Active Noise Control) systems is more effective than an adaptive FIR filter when acoustic feedback exists, in which cause an order of an adaptive FIR filter must be very large if some of poles of the ideal control filter are near the unit circle. But the IIR filters may have stability problems especially when the adaptive algorithm for adaptive filters is not yet converged. In this paper, a stabilized multi-channel recursive LMS (MCRLMS) algorithm for an adaptive multi-channel IIR filter is presented. RLMS algorithms usually diverge before the algorithm is not yet converged. So, in the beginning of the ANC system, the stability of the RLMS algorithms could be improved by pulling the poles of the IIR filter to the center of the unit circle, and returning the poles to their original positions after the filter converges. Computer simulations and experiments for dipole ducts using a TMS320C32 digital signal processor have performed to show the effectiveness of a proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.30-32
• /
• 2006

An adaptive IIR filter in ANC(Active Noise Control) systems is more effective than an adaptive FIR filter when acoustic feedback exists, in which cause an order of an adaptive FIR filter must be very large if some of poles of the ideal control filter are near the unit circle. But the IIR filters may have stability problems especially when the adaptive algorithm for adaptive filters is not yet converged. In this paper, a stabilized multi-channel recursive LMS (MCRLMS) algorithm for an adaptive multi-channel IIR filter is presented. RLMS algorithms usually diverge before the algorithm is not yet converged. So, in the beginning of the ANC system, the stability of the RLMS algorithms could be Improved by pulling the poles of the IIR filter to the center of the unit circle, and returning the poles to their original positions after the filter converges. Computer simulations and experiments for dipole ducts using a TMS320C32 digital signal processor have performed to show the effectiveness of a proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1498-1505
• /
• 2009

In centralized control sensor network, tree-based multi-channel communication overcomes the recurrent channel switching and makes possible to transfer data simultaneously from different sources. In our paper, we propose a greedy algorithm named as NIT (Non-Intersecting Tree) that the trees can avoid inter-tree interference. We also propose channel switching technique by which trees can avoid link failure or area blocking due to external interference locally without rerunningthe algorithm and without interrupting the whole network. At first we applied our algorithm for a random topology and then we evaluate the performance of the network using NS-2 simulator. The results show that with the increasing of channel the throughputand delivery ratio are increased significantly. We got better performance than a using a recent proposed Tree-based Multi-Channel Protocol (TMCP).

• ETRI Journal
• /
• v.36 no.6
• /
• pp.960-967
• /
• 2014

In this paper, an analytical framework is proposed for the optimization of network performance through joint congestion control, channel allocation, rate allocation, power control, scheduling, and routing with the consideration of fairness in multi-channel wireless multihop networks. More specifically, the framework models the network by a generalized network utility maximization (NUM) problem under an elastic link data rate and power constraints. Using the dual decomposition technique, the NUM problem is decomposed into four subproblems - flow control; next-hop routing; rate allocation and scheduling; power control; and channel allocation - and finally solved by a low-complexity distributed method. Simulation results show that the proposed distributed algorithm significantly improves the network throughput and energy efficiency compared with previous algorithms.