• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1769-1777
• /
• 2018

This paper proposes a method for optimal placement of Phasor Measurement Units (PMUs) considering system configuration and its attributes during the planning phase of PMU deployment. Each bus of the system is assessed on four diverse attributes; namely, redundancy of measurements, rotor angle and frequency monitoring of generator buses, reactive power deficiency, and maximum loading limit under transmission line outage contingency, and a consolidated 'degree of criticality' is determined using Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The major contribution of the proposed work is the development of modified objective function which incorporates values of the degree of criticality of buses. The problem is formulated as maximization of the aggregate degree of criticality of the system. The resultant PMU configuration extends complete observability of the system and majority of the PMUs are located on critical buses. As budgetary restrictions on utilities may not allow installation PMUs even at optimal locations in a single phase, multi-horizon deployment of PMUs is also addressed. The proposed approach is tested on IEEE 14-bus, IEEE 30-bus, New England (NE) 39-bus, IEEE 57-bus and IEEE 118-bus systems and compared with some existing methods.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.256-267
• /
• 2015

Grid-connected transformerless photovoltaic (PV) inverters (TPVIs) are increasingly dominating the market due to their higher efficiency, lower cost, lighter weight, and reduced size when compared to their transformer based counterparts. However, due to the lack of galvanic isolation in the low voltage grid interconnections of these inverters, the PV systems become vulnerable to leakage currents flowing through the grounded star point of the distribution transformer, the earth, and the distributed parasitic capacitance of the PV modules. These leakage currents are prohibitive, since they constitute an issue for safety, reliability, protection coordination, electromagnetic compatibility, and module lifetime. This paper investigates a wide range of multi-kW range power rating TPVI topologies and classifies them in terms of their leakage current attributes. This systematic classification places most topologies under a small number of classes with basic leakage current attributes. Thus, understanding and evaluating these topologies becomes an easy task. In addition, based on these observations, new topologies with reduced leakage current characteristics are proposed in this paper. Furthermore, the important efficiency and cost determining characteristics of converters are studied to allow design engineers to include cost and efficiency as deciding factors in selecting a converter topology for PV applications.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.2038-2059
• /
• 1997

The physical attributes of a computer, such as processor speed, size and access time of memory, and I/O bandwidth, are fixed when the computer is delivered to the user. Under these conditions, the performance of a multi-process system where multiple processes share various resources can be enhanced by monitoring and controlling the relationship between the user processes and the system resources. This paper applies object oriented concept to the performance management and suggests a standard for the management. Resource managers and user processes are defined as managed object and a performance manager is defined as a managing object. A protocol between the user processes and performance manager is designed and attributes and methods of the objects are also defined. Through the standardization, the user processes and the performance manager can be developed independently and the system's performance can also be collectively managed.

• Journal of KIISE:Software and Applications
• /
• v.32 no.2
• /
• pp.75-84
• /
• 2005

Sequential pattern mining is an important data mining problem with broad applications. While the current methods are generating sequential patterns within a single attribute, the proposed method is able to detect them among different attributes. By incorporating these additional attributes, the sequential patterns found are richer and more informative to the user This paper proposes a new method for generating multi-dimensional sequential patterns with the use of Hellinger entropy measure. Unlike the Previously used methods, the proposed method can calculate the significance of each sequential pattern. Two theorems are proposed to reduce the computational complexity of the proposed system. The proposed method is tested on some synthesized purchase transaction databases.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.116-123
• /
• 2001

An automated injection molding design methodology has been developed to optimize multiple quality attributes, which are usually in conflict with each other, in injection molded parts. For the optimization, commercial CAE simulation tools and optimization techniques are integrated into the methodology. To decal with the multiple objective problem the relative closeness computed in TOPSIS(Technique for Order Preference by Similarity to Ideal Solution) is used as a performance measurement index for optimization multiple part defects. To attain robustness against process variation, Taguchi's quadratic loss function is introduced in the TOPSIS. Also, the modified complex method is used as an optimization tool to optimize objective function. The verification of the developed design methodology was carried out on simulation software with an actual model. Applied to production this methodology will be useful to companies in reducing their product development time and enhancing their product quality.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.33-40
• /
• 2020

In order to satisfy customers, it is important to identify the quality elements that affect customers' satisfaction. The Kano model has been widely used in identifying multi-dimensional quality attributes in this purpose. However, the model suffers from various shortcomings and limitations, especially those related to survey practices such as the data amount, reply attitude and cost. In this research, a model based on the text sentiment analysis is proposed, which aims to substitute the survey-based data gathering process of Kano models with sentiment analysis. In this model, from the set of opinion text, quality elements for the research are extracted using the morpheme analysis. The opinions' polarity attributes are evaluated using text sentiment analysis, and those polarity text items are transformed into equivalent Kano survey questions. Replies for the transformed survey questions are generated based on the total score of the original data. Then, the question-reply set is analyzed using both the original Kano evaluation method and the satisfaction index method. The proposed research model has been tested using a large amount of data of public IT service project evaluations. The result shows that it can replace the existing practice and it promises advantages in terms of quality and cost of data gathering. The authors hope that the proposed model of this research may serve as a new quality analysis model for a wide range of areas.

• Journal of Internet Computing and Services
• /
• v.24 no.4
• /
• pp.37-45
• /
• 2023

Adaptive has gained significant attention in Education Technology (EdTech), with personalized learning experiences becoming increasingly important. Next-generation chatbots, including models like ChatGPT, are emerging in the field of education. These advanced tools show great potential for delivering personalized and adaptive learning experiences. This paper reviews previous research on adaptive learning and the role of chatbots in education. Based on this, the paper explores current and future chatbot technologies to propose a framework for using ChatGPT or similar chatbots in adaptive learning. The framework includes personalized design, targeted resources and feedback, multi-turn dialogue models, reinforcement learning, and fine-tuning. The proposed framework also considers learning attributes such as age, gender, cognitive ability, prior knowledge, pacing, level of questions, interaction strategies, and learner control. However, the proposed framework has yet to be evaluated for its usability or effectiveness in practice, and the applicability of the framework may vary depending on the specific field of study. Through proposing this framework, we hope to encourage learners to more actively leverage current technologies, and likewise, inspire educators to integrate these technologies more proactively into their curricula. Future research should evaluate the proposed framework through actual implementation and explore how it can be adapted to different domains of study to provide a more comprehensive understanding of its potential applications in adaptive learning.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.7
• /
• pp.1935-1950
• /
• 2023

The arrival of the Internet of Things and 5G technology enables users to rely on edge computing platforms to process massive data. Data sharing based on edge computing refines the efficiency of data collection and analysis, saves the communication cost of data transmission back and forth, but also causes the privacy leakage of a lot of user data. Based on attribute-based encryption and blockchain technology, we design a fine-grained access control scheme for data in edge computing, which has the characteristics of verifiability, support for outsourcing decryption and user attribute revocation. User attributes are authorized by multi-attribute authorization, and the calculation of outsourcing decryption in attribute encryption is completed by edge server, which reduces the computing cost of end users. Meanwhile, We implemented the user's attribute revocation process through the dual encryption process of attribute authority and blockchain. Compared with other schemes, our scheme can manage users' attributes more flexibly. Blockchain technology also ensures the verifiability in the process of outsourcing decryption, which reduces the space occupied by ciphertext compared with other schemes. Meanwhile, the user attribute revocation scheme realizes the dynamic management of user attribute and protects the privacy of user attribute.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.10
• /
• pp.2658-2681
• /
• 2023

In edge computing scenarios, IoT end devices play a crucial role in relaying and forwarding data to significantly improve IoT network performance. However, traditional routing mechanisms are not applicable to this scenario due to differences in network size and environment. Therefore, it becomes crucial to establish an effective and reliable data transmission path to ensure secure communication between devices. In this paper, we propose a trusted path selection strategy that comprehensively considers multiple attributes, such as link stability and edge cooperation, and selects a stable and secure data transmission path based on the link life cycle, energy level, trust level, and authentication status. In addition, we propose the Stability-based On-demand Multipath Distance Vector (STAOMDV) protocol based on the Ad hoc AOMDV protocol. The STAOMDV protocol implements the collection and updating of link stability attributes during the route discovery and maintenance process. By integrating the STAOMDV protocol with the proposed path selection strategy, a dependable and efficient routing mechanism is established for IoT networks in edge computing scenarios. Simulation results validate that the proposed STAOMDV model achieves a balance in network energy consumption and extends the overall network lifespan.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.185-191
• /
• 2004

The mean and Clustering are important methods of data mining, which is now widely applied to various multi-attributes problem However, feature weighting and feature selection are important in those methods bemuse features may differ in importance and such differences need to be considered in data mining with various multiful-attributes problem. In addition, in the event of arithmetic mean, which is inadequate to figure out the most fitted result for structure of evaluation with attributes that there are weighted and ranked. Moreover, it is hard to catch hold of a specific character for assume the form of user's group. In this paper. we propose a dispersion mean algorithm for evaluation of similarity measure based on the geometrical figure. In addition, it is applied to mean classified by user's group. One of the key issues to be considered in evaluation of the similarity measure is how to achieve objectiveness that it is not change over an item ranking in evaluation process.