• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.9
• /
• pp.1-8
• /
• 2020

In this study, the optimal design of the multi-cavity mold layout and packing pressure for the automobile TCU connector cover is determined based on the injection molding analysis and the desirability function method for multi-characteristic optimization. The design characteristics to be optimized are the warpage and sink marks of the product, the scrap of the feed system, and the clamping force. The optimal design is determined by performing injection molding analysis and desirability analysis for design alternatives defined by a complete combination of five mold layouts and six-level packing pressure. The optimal design shows that the desirability values for individual characteristics are quite high and balanced, and the resulting values of individual characteristics are satisfactorily low.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.279-282
• /
• 2007

Typically a wireless sensor network consists of a number of nodes that sense surrounding environment and collaboratively work to process and route the sensing data to a sink or gateway node. We propose an architecture with support of multiple routers in IPv6-based Low-power Wireless Personal Area Network (6LoWPAN). Our architecture provides traffic load balancing and increases network lifetime as well as self-healing mechanism so that in case of a router failure the network still can remain operational. Each router sends its own Router Advertisement message to nodes and all the nodes receiving the messages can select which router is the best router with the minimum hop-count and link information. We have implemented the architecture and assert our architecture helps in traffic load balancing and reducing data transmission delay for 6LoWPAN.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1447-1454
• /
• 2009

Currently, geothermal heat pump systems are being installed in new official and commercial building, welfare facilities, and school but there are a few cases for the housing heat sink in Korea. The reason is that there are no progressive taxes for the household electrical use, no actual output for the application of geothermal technology, high initial investment. For the overall use in multi family apartment such as the Green Home etc, technology development and building of the relevant research team need to be done through preliminary study. Core subjects for overall use include cooling heating load estimation for the multi family apartment, economical efficiency of the geothermal cooling and heating system, design and construction technology of the geothermal cooling and heating system for the multi family apartment, commercialization plan, and state of the art analysis. Selection of the detailed subjects with respect to core subject, driving schedule and commercialization plan, driving system, presentation of the utilization plan.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.125-126
• /
• 2011

본 논문은 방열판 재질에 따른 열 해석에 관한 것으로서 구리와 알루미늄 재질의 방열판에 LED를 배치하여 COMSOL Multi physics를 사용한다. 시뮬레이션 결과 구리 재질의 방열판이 알루미늄 재질의 방열판보다 Min. 온도가 약 $20^{\circ}C$ 높게 측정되었다. 실험결과 실제 제작을 하지 않고 시뮬레이션을 통해 열해석이 가능함을 확인하였다.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.519-524
• /
• 2007

One of the most important issues on the sensor network with resource limited sensor nodes is prolonging the network lifetime by effectively utilizing the limited node energy. The most representative mechanism to achieve a long lived sensor network is the clustering mechanism which can be further classified into the single hop mode and the multi hop mode. The single hop mode requires that all sensor nodes in a cluster communicate directly with the cluster head(CH) via single hop md, in the multi hop mode, sensor nodes communicate with the CH with the help of other Intermediate nodes. One of the most critical factors that impact on the performance of the existing multi hop clustering mechanism is the cluster size and, without the assumption on the uniform node distribution, finding out the best cluster size is intractable. Since sensor nodes in a real sensor network are distributed non uniformly, the fixed size mechanism may not work best for real sensor networks. Therefore, in this paper, we propose a new dynamic size multi hop clustering mechanism in which the cluster size is determined according to the distance from the sink to relieve the traffic passing through the CHs near the sink. We show that our proposed scheme outperforms the existing fixed size clustering mechanisms by carrying out numerical analysis and simulations.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.1
• /
• pp.45-50
• /
• 2013

Sensors have limited resources in sensor networks, so efficient use of energy is important. Representative clustering methods, LEACH, LEACHC, TEEN generally use direct transmission methods from cluster headers to a sink node to pass collected data. If clusters are located at a long distance from the sink node, the cluster headers exhaust a lot of energy in order to transfer the data. As a consequence, the life of sensors is shorten and re-clustering is needed. In the process of clustering, sensor nodes consume some energy and the energy depletion of the cluster headers meet another energy exhaustion. A method of transferring data from cluster headers to the sink using neighbor clusters is needed for saving energy. In this paper, we propose a novel routing method using a multi-hop transmission method in cluster sensor networks. This method uses the topology matrix which presents cluster topology. One-hop routing and two-hop routing are proposed in order to increase the energy efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.493-502
• /
• 2010

In this paper we propose a scalable sensor network system that makes mesh network among the sink nodes to solve the scalability problem of existing sensor network which is caused by multi-hop networking between the sensor nodes. In the proposed system, the sink nodes have the wireless networking ability to communicate with another sink nodes in mesh fashion, and with the monitoring nodes which is located in the local area or internet area. Especially, the system includes L4(Application Layer) routing mechanism that provides subscribe/publish service to serve selective transmission of sensor data to the specific monitoring nodes. The collected sensor data is transmitted to the monitoring nodes when the sensor data is matched with the monitoring node's interesting value.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.4
• /
• pp.467-475
• /
• 2009

Congestion management is one of the technical challenges in power system deregulation. This paper presents single objective and multi-objective optimization approaches for optimal choice, location and size of Static Var Compensators (SVC) and Thyristor Controlled Series Capacitors (TCSC) in deregulated power system to improve branch loading (minimize congestion), improve voltage stability and reduce line losses. Though FACTS controllers offer many advantages, their installation cost is very high. Hence Independent System Operator (ISO) has to locate them optimally to satisfy a desired objective. This paper presents optimal location of FACTS controllers considering branch loading (BL), voltage stability (VS) and loss minimization (LM) as objectives at once using GA. It is observed that the locations that are most favorable with respect to one objective are not suitable locations with respect to other two objectives. Later these competing objectives are optimized simultaneously considering two and three objectives at a time using multi-objective Strength Pareto Evolutionary Algorithms (SPEA). The developed algorithms are tested on IEEE 30 bus system. Various cases like i) uniform line loading ii) line outage iii) bilateral and multilateral transactions between source and sink nodes have been considered to create congestion in the system. The developed algorithms show effective locations for all the cases considered for both single and multiobjective optimization studies.

• Nuclear Engineering and Technology
• /
• v.56 no.11
• /
• pp.4587-4600
• /
• 2024

Based on the lessons from the Fukushima accident, new strategies to mitigate the spread of accidents in nuclear power plants have been established that consider portable equipment. The diverse and flexible coping strategies (FLEX) and multi-barrier accident coping strategy (MACST) based on the utilization of portable equipment are being adopted in case of an extended loss of all AC power and loss of ultimate heat sink. In this context, the establishment of specific strategies for utilizing portable equipment has emerged as an important issue. This study proposes a multi-unit probabilistic safety assessment (MUPSA)-based evaluation framework consisting of several steps to quantitatively assess the reduction in risk from the use of portable equipment at a multi-unit site, which can provide a basis for establishing optimal portable equipment strategies. According to the framework, after first defining the scope of the evaluation, risk-significant types of portable equipment are selected and the scenarios are analyzed. Risk reduction is then evaluated using modified MUPSA models according to the deployment of the portable equipment. A case study was conducted for an internal loss of off-site power (LOOP) and seismic LOOP focusing on how to evaluate the effectiveness of portable equipment through the developed framework.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.445-450
• /
• 2011

In this paper, we describe the implementation of an wireless sensor network testbed. We developed a web-based sensor network gateway and enhanced the Surge program which is used for sending and routing of packets in the sensor field. The developed program can transmit the source data of sensor nodes to the sink node via multi-hop routing, and deliver user commands to actuate sensor related equipments. Moreover, in this testbed, the data transport path from a node to the sink can be monitored. Thus we can approximate the network topology and the relative positions of sensor nodes. We also describe an application of the testbed that is used for controlling a remote robot.