• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2013

In this study of Eccentric Braced Frames have identified the following target eccentricity on the length of the inelastic behavior of the reaction by calculating the correction factor by comparing it to the value suggested by the earthquake provided material for the rational design aims to There are. As a variable-length V-braced frame analysis model stations were set up. Eccentricity faults in the model according to the length stiffness ratio, the maximum amount of energy dissipation were analyzed base shear and multi-layered model of the reaction from the eccentricity correction factor calculated on the length of the building standards proposed by KBC 2009 in response eccentricity correction factor calculated from The length varies. does not have the same response modification factor was confirmed.

• The Journal of Korean Society for School & Community Health Education
• /
• v.18 no.2
• /
• pp.1-25
• /
• 2017

Objectives: There is higher rates of experience of suicide ideation and suicide attempt of adolescents in the Lima and Callao region compared with the results of the epidemiological study (2013) conducted by Peru National Institute of Mental Health and the Global School-based Student Health Survey (2010) which is was conducted among adolescents across all regions of Peru. Based on the PRECEDE model, this study analyzed the prevalence and the factor associated with the suicide attempt among the adolescent in a poor urban area in Peru. Methods: A stratified random sampling was used for the survey to select study participants from the 6 secondary schools based in Comas or Callao. The survey was conducted November 25th and December 4th in 2015 and a total of 738 individuals included in the analysis. In order to analyze factors influencing suicide attempt, comparison of predisposing factor, reinforcing factor, enabling factor, behavioral factor, environmental factor, psychological factors by suicide attempt and suicide risk group were identified through the chi-square test and hierarchical logistic regression. Results: Results showed that those who reported having less parental understanding, less time spent with parents, and 'almost none/none' for parental affection had more experience of suicide attempt and were more likely to sort into the high suicide risk group. Also, a greater proportion of those with the experience of suicide attempt had more experience of smoking and alcohol consumption, and experience of physical abuse and feeling insulted and depression in comparison to that of those without experience of suicide attempt. Variables that had a significant effect on suicide attempt included depression, subjective happiness, smoking experience, sexual intercourse, involvement in fight, parental affection, and gender (male). Conclusions: The results of the current study can serve as grounds for the necessity of acknowledging that adolescent suicide does not simply depend on a couple of factors, but arises from situations in which individual, home, school, social factors influence one another, and therefore adolescent suicide should be prevented and addressed through a multi-dimensional and integrated approach.

• Journal of Information Processing Systems
• /
• v.7 no.3
• /
• pp.473-518
• /
• 2011

Software measurement is a key factor in managing, controlling, and improving the software development processes. Software quality is one of the most important factors for assessing the global competitive position of any software company. Thus the quantification of quality parameters and integrating them into quality models is very essential. Software quality criteria are not very easily measured and quantified. Many attempts have been made to exactly quantify the software quality parameters using various models such as ISO/IEC 9126 Quality Model, Boehm's Model, McCall's model, etc. In this paper an attempt has been made to provide a tool for precisely quantifying software quality factors with the help of quality factors stated in ISO/IEC 9126 model. Due to the unpredictable nature of the software quality attributes, the fuzzy multi criteria approach has been used to evolve the quality of the software.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.10
• /
• pp.49-56
• /
• 2013

The use of geothermal energy has been increased for economic and environmental friendly utilization. Ground thermal conductivity and borehole thermal resistance are very important parameters in the design of geothermal heat pump system. This paper presents an experimental study of heat exchange rate of U and W type ground heat exchangers (GHEs) measured by thermal performance tests (TPTs). U and W type GHEs were installed in a partially saturated dredged soil deposit, and TPTs were conducted to evaluate heat exchange rates under 100-hr continuous operation condition. The heat exchange rates were also calculated by analytical models to estimate borehole thermal resistances and were compared with experimental results. It comes out that multi-pole and equivalent diameter (EQD) models resulted in more accurate agreement than shape factor (SF) model which is currently more often used.

• Journal of Fashion Business
• /
• v.15 no.3
• /
• pp.142-155
• /
• 2011

By developing attitude transfer model, this study examined the co-marketing alliance effect between fashion and other industries (i.e., service and product brands) based upon the information integration theory. In addition, it examined the product tangibility/intangibility effects of partner brands by controlling stimuli: two alliance cases of fashion and service brands and two alliance cases of fashion and product brands. A total of 1,037 Korean women aged 20 to 39 were surveyed to compare the prior- and post- attitudes toward fashion/partner brands under four fictitious co-marketing alliance cases. Confirmatory factor analysis (CFA), multi-group CFA, structural equation modeling (SEM) analysis, and multi-group SEM analysis were conducted to test the hypotheses. The results demonstrated that the prior-attitude toward fashion brand partially affected the alliance attitude, and the co-marketing alliance was affected by prior-attitudes partner brands. The result of multi-group SEM analysis supported the significant differences between service and product brands as alliance partners, which might refer to the effect of product tangibility, existing in brand alliance contexts. The alliance evaluation affected the subsequent evaluations on each participating brands. This study empirically provides the conceptual structure of how consumer attitudes toward the participating brands interact with the attitudes toward alliance and offer practical insights. Specifically, upon employing the manipulated co-marketing alliances cases, this study demonstrates the partnering effect according to product tangibility of partner brands.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.941-951
• /
• 2016

In this paper, cognitive radio and simultaneous wireless information and power transfer (SWIPT) are effectively combined to design a spectrum-efficient and energy-efficient transmission paradigm. Specifically, a novel SWIPT-based primary-secondary cooperation model is proposed to increase the transmission rate of energy/spectrum constrained users. In the proposed model, a multi-antenna secondary user conducts simultaneous energy harvesting and information forwarding by means of power splitting (PS), and tries to maximize its own transmission rate under the premise of successfully assisting the data delivery of the primary user. After the problem formulation, joint power splitting and beamforming optimization algorithms for decode-and-forward and amplify-and-forward modes are presented, in which we obtain the optimal PS factor and beamforming vectors using a golden search method and dual methods. Simulation results show that the proposed SWIPTbased primary-secondary cooperation schemes can obtain a much higher level of performance than that of non-SWIPT cooperation and non-cooperation schemes.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.3
• /
• pp.46-56
• /
• 2001

The present study concerns the numerical simulation of a supply airflow control in a variable air volume (VAY) system. A stratified thermal model (multi-zone model) is suggested to predict a local thermal response of an air-conditioned space. The effects of various thermal parameters such as the cooling system capacity, the thermal mass of an air-conditioned space, the time delay of thermal effect, and the building envelope heat transmission are investigated. Further, the influence of control parameters such as the supply air temperature, the PI control factor and the thermostat location on a VAV system is quantitatively delineated. The results obtained show that the previous homogeneous lumped thermal model (single zone model) may overestimate the time taken to the set point temperature. It is also found that there exist the appropriate ranges of the control parameters for the optimal airflow control of the VAV system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.7
• /
• pp.632-641
• /
• 2000

The present study concerns the simulation of supply-air control in a variable air volume (VAV) system. A stratified lumped thermal model (multi-zone model) is suggested to predict local thermal response of an air-conditioned space. The effects of various thermal parameters such as the cooling system capacity, the thermal mass of air-conditioned space, the time delay of thermal effect, and the building envelope heat transmission are investigated in detail. Further, the influence of control parameters, PI control factor and the sensor location on a VAV system is quantitatively delineated. The results obtained show that the previous homogeneous lumped thermal model (1-zone model) may predict a significantly different thermal response in the air-conditioned space according to the sensor location.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.3
• /
• pp.293-303
• /
• 2015

Optimal design of the water supply pipe network aims to minimize construction cost while satisfying the required hydraulic constraints such as the minimum and maximum pressures, and velocity. Since considering one single design factor (i.e., cost) is very vulnerable for including future conditions and cannot satisfy operator's needs, various design factors should be considered. Hence, this study presents three kinds of design factors (i.e., minimizing construction cost, maximizing reliability, and surplus head) to perform multi-objective optimization design. Harmony Search (HS) Algorithm is used as an optimization technique. As well-known benchmark networks, Hanoi network and Gyeonggi-do P city real world network are used to verify the applicability of the proposed model. In addition, the proposed multi-objective model is also applied to a real water distribution networks and the optimization results were statistically analyzed. The results of the optimal design for the benchmark and real networks indicated much better performance compared to those of existing designs and the other approach (i.e., Genetic Algorithm) in terms of cost and reliability, cost, and surplus head. As a result, this study is expected to contribute for the efficient design of water distribution networks.

• Journal of Korea Trade
• /
• v.24 no.3
• /
• pp.20-36
• /
• 2020

Purpose - As the global product network expands through both internationalization and diversification of the multimodal transportation system, corporate strategies have shifted to emphasize the importance of a high value-added international logistics system. To guide policies and strategies to attract relevant industries, this study aims to analyze the location competitiveness of regional logistics distribution center to serve Northeast Asia. Design/methodology - Multi-criteria techniques are considered to offer a promising framework for evaluating decision-making factors. This paper employed an analytic hierarchy process to analyze the hierarchal structure of determinants for selecting the location of a regional logistics distribution center. Adopting both qualitative and quantitative evaluations, this study suggest political implications for a regional logistics distribution center development, such as the direction of political support, service differentiation and infrastructure development. Findings - This study developed a location competitiveness evaluation model, based on the case study of the major port-cities in Northeast Asia. Evaluation model incorporates five factors underpinning 17 components extracted using factor analysis. The results revealed that the logistics factor is the most significant factor for evaluating the competitiveness of a regional logistics distribution center. The remaining factors were market, costs, and services environment. Comparing qualitative and quantitative evaluations, results provide useful insights for a regional logistics distribution center development in Northeast Asia. Originality/value - This study revealed differences between qualitative and quantitative evaluations. The finding implies that prior works on evaluation models of competitiveness has not successfully measured the gap between quantitative data and expert' evaluations. To overcome this limitation, this paper considered both actual data such as actual distance, cost, the number of companies located, and expert opinions.