• ETRI Journal
• /
• v.27 no.3
• /
• pp.257-266
• /
• 2005

Many multi-modulus blind equalization algorithms (MMA) have been presented in the past to overcome the undesirable high misadjustment exhibited by the well-known constant modulus algorithm. Some of these MMA schemes, specifically tailored for quadrature amplitude modulation (QAM) constellations, have also been proved to fix the phase offset error without needing any rotator at the end of the equalizer stage. In this paper, a new multi-modulus algorithm is presented for QAM signals. The contribution lies in the technique to incorporate the sliced symbols (outcomes of decision device) in the multi-modulus-based weight adaptation process. The convergence characteristics of the proposed sliced multi-modulus algorithm (S-MMA) is demonstrated by way of simulations, and it is shown that it gives better steady-state performance in terms of residual inter-symbol interference and symbol-error rate. It has also been shown that the proposed algorithm exhibits lesser steady-state misadjustment compared to the best reported MMA.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1167-1176
• /
• 1995

This paper suggests a method for optimal power assignment of the satellite transponder input carriers in the Multi-level & Multi-bandwidth system. The interference and the noise effects analyzed for the optimal power assignment are intermodulation product caused by the nonlinear transponder characteristics, adjacent channel interference, co-channel interference, and thermal noise in the satellite link. The Fletcher- Powell algorithm is used to determine the optimal input carrier power. The performance criteria for optimal power assignment is classified into 4 categories according to the CNR of destination receiver earth station to meet the requirement for various satellite link environment. We have performed mathematical analysis of objective functions and their derivatives for use in the Fletcher-Powell algorithm, and presented various simulation results based on mathematical analysis. Since the satellite link, it is meaningful to model and analyze these effects in a unified manner and present the method for optimal power assignment of transponder input carriers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1780-1786
• /
• 2008

The performance of underwater wireless communication system is influenced on channel characteristic. Especially, a delay spread cause by reverberation and multi-path happen the ISI (Inter Symbol Interference) and reduces the communication performance. In this paper, we study the application of high speed data transmission in underwater to use the OFDM (Orthogonal Frequency Division Multiplexing) technique for robust the reverberation and multi-path. we confirm the performance of communication in underwater to use the model for actually underwater channel simulation model. As a result, we acquired the BER of modulation techniques. The BER of single carrier is $2{\times}10^{-1}$ and BER of multi currier is $8{\times}10^{-2}$ in 1000m. Transmission of single carrier is 5 kbps.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.410-416
• /
• 2023

Unlike geostationary satellite communication systems, low-earth orbit(LEO) satellite communication systems move at relatively high speeds, and the angle with the ground device is not fixed and varies over a wide range. The propagation channel condition between satellites and ground nodes cannot be assumed line of sight(LOS) anymore. This paper analyzes the low-orbit multi-path fading satellite channel model that can occur in LEO satellite communication systems and Doppler frequency transition caused by high-speed maneuvering of LEO satellites and presents effective equalization techniques for OFDM and SC-FDE transmission methods suitable for multi-path frequency selective fading satellite channel models. In addition, this paper compares and analyzes the performance of OFDM and SC-FDE transmission methods in multipath fading LEO satellite channel environment using the proposed equalization techniques through simulations. Simulation results showed that SC-FDE outpeformed OFDM.

• International Journal of Computer Science & Network Security
• /
• v.23 no.7
• /
• pp.1-8
• /
• 2023

An Orthogonal Frequency Division Multiplexing (OFDM) based wireless communication system has drawn wide attention for its high transmission rate and high spectrum efficiency in not only radio but also Underwater Acoustic (UWA) applications. Because of the narrow sub-carrier spacing of OFDM, orthogonality between sub-carriers is easily affected by Doppler effect caused by the movement of transmitter or receiver. Previously, Doppler compensation signal processing algorithm for Desired propagation path was proposed. However, other Doppler shifts caused by delayed Undesired signal arriving from different directions cannot be perfectly compensated. Then Receiver Bit Error Rate (BER) is degraded by Inter-Carrier-Interference (ICI) caused in the case of Multi-path Doppler channel. To mitigate the ICI effect, a modified Delay and Doppler Profiler (mDDP), which estimates not only attenuation, relative delay and Doppler shift but also sampling clock shift of each multi-path component, is proposed. Based on the outputs of mDDP, an ICI canceling multi-tap equalizer is also proposed. Computer simulated performances of one-tap equalizer with the conventional Time domain linear interpolated Channel Transfer Function (CTF) estimator, multi-tap equalizer based on mDDP are compared. According to the simulation results, BER improvement has been observed. Especially, in the condition of 16QAM modulation, transmitting vessel speed of 6m/s, two-path multipath channel with direct path and ocean surface reflection path; more than one order of magnitude BER reduction has been observed at CNR=30dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1039-1048
• /
• 2011

Carrier Ethernet, which extend The algorithm based on constructing the mixed topology and performing link stretching, MT/s, has been proposed for designing cost-efficient Carrier Ethernet in optical network with multi-line-rate. However, the MT/s algorithm has high blocking ratio because the wavelength capacity is fully allocated without considering the load balance of network. In this paper, we propose an efficient mixed topology configuration (EMTC) algorithm by modifying MT/s algorithm. In order to reduce blocking ratio, we adapt a threshold for each link to restrict the link utilization so that traffic load can be distributed over whole network. We also apply the EMTC algorithm into optical hybrid switched network to evaluate the availability of our algorithm for different applications. The performance of the EMTC algorithm is compared with that of MT/s algorithm through OPNET simulation. The simulation results show that our algorithm achieve lower blocking ratio than the MT/s algorithm. Moreover, in hybrid switched network, our algorithm performs better than MT/s algorithm in terms of packet loss ratio and end-to-end delay.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.8-12
• /
• 2009

We propose BMPA(balanced multimedia packet allocation) scheme. This scheme considers the issue of optimal sub-carrier allocation in OFDMA multicast system. When RT(real time) packets and NRT(non-real time) packets arrive at the same time, BMPA scheme gives higher weight to RT packets than NRT packets and then, it allocates sub-carriers according to the total weight sum of packets in each user. This process acts as both packet scheduler and sub-carrier allocation. Therefore, each user receives multimedia packets with reliability. With simulation results, it shows that BMPA scheme ensures long-term system throughput and, in average RT packet delay, BMPA scheme greatly outperforms multi-user water-filling algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.65-70
• /
• 2005

Incorrect ambiguity integer of GPS make a large error on attitude determination. In this paper one method is suggested for estimating the multipath of GPS carrier measurement while attitude determination. The multi-antenna system consists of 4 antennas have the same clock error help to make attitude determination effectively. If the distance between antennas is a half wavelength, it is not necessary to search the ambiguity integer and the multipath of GPS carrier measurement can be estimated. The results of the simulation are shown and analyzed.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.129-130
• /
• 2016

본 논문에서는 근사 계단 제어 변조(Nearest Level Control Modulation)로 동작하는 모듈형 멀티레벨 컨버터(Modular Multi level Converter)에서 충전 회로나 반송파(Carrier)없이 초기 충전(Pre-charging)하는 새로운 방식을 제안하였다. 이의 성능을 검증하기 위해 PSCAD/EMTDC 소프트웨어를 통해 암(Arm)당 12개의 서브모듈(Sub-Module)로 구성된 3상 10kVA 모듈형 멀티레벨 컨버터를 구현 및 시뮬레이션을 수행하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.2
• /
• pp.45-51
• /
• 2003

The multi-piloting type progressive die for U-bending sheet metal production part is a very specific division. This study reveals the sheet metal forming process with multi-forming die by center carrier type feeding system. Through the FEM simulation by DEFORM, it was accepted to u-bending process as the first performance to design of strip process layout. The next process of die development was studied according to sequence of die development, i.e die structure, machining condition for die making, die materials, heat treatment of partially die components, know-how and so on. The feature of this study is the die development of scrapless progressive die of multi-stage through the modeling on the I-DEAS program, components drawing on the Auto-LISP, CAD/CAM application, ordinary machine tool operating and revision by tryout.