• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.357-362
• /
• 2008

The present study has been conducted variable refrigerant flow system applied building. Multi air-conditioning system has some benefits : easier building management and maintenance and energy saving. Recently, the system heat pump has been employed in medium-sized and tall buildings. However, the performance data and design method for system heat pump are limited in literature due to complicated system parameters and operating conditions. In the present study, case study of a system heat pump applied various building. The aim of this paper is to application multi air-conditioners and to inform the benefits of multi air-conditioners.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.6
• /
• pp.524-529
• /
• 2006

In this paper, we propose a method to design variable structure systems with sliding sector for multi-input multi-output systems with mismatched uncertainties in the state matrix. For the uncertain systems we define sliding sectors within which a norm of the state decreases with zero input despite of mismatched uncertainties. Using the notion of the sliding sector we give simple design algorithms of variable structure control laws that can reduce the chattering. Finally, we give a design example in order to show the effectiveness of our method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.321-328
• /
• 2008

In this paper, variable gain amplifier(VGA) with a gain slope controller has been proposed and verified by circuit simulations and measurements. The proposed VGA has a gain control, gain slope switch and variable gain range. The input source coupled pair with diode connected load is used for VGA gain stage. The gain slope controller with switch can control VGA gain slope. The proposed VGA is fabricated in $0.18{\mu}m$ CMOS process for multi -standard wireless receiver. The proposed two stage VGA consumes min. 2.0 mW to max. 2.6 mW in gain control range and gives input IP3 of -3.77 dBm and NF of 28.7 dB at 1.8 V power supply under -25 dBm, 1 MHz input. The proposed VGA has 37 dB(-16 dB $\sim$ 21 dB) variable gain range, and 8 dB gain range control per 0.3 V control voltage, and can provide variable gain, positive and negative gain slope control, and gain range control. This VGA characteristics provide design flexibility in multi-standard wireless receiver.

• International Journal of Automotive Technology
• /
• v.8 no.6
• /
• pp.771-780
• /
• 2007

In recent studies, various types of multi mode electric variable transmissions of hybrid electric vehicles have been proposed. Multi mode electric variable transmission consists of two or more different types of planetary gear hybrid powertrain system(PGHP), which can change its power flow type by means of clutches for improving transmission efficiencies. Generally, the power flows can be classified into three different types such as input split, output split and compound split. In this study, we analyzed power transmission characteristics of the possible six input split systems, and found the suitable system for single or multi mode hybrid powertrain. The input split system used in PRIUS is identified as a best system for single mode, and moreover we identified some suitable systems for dual mode.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.5
• /
• pp.446-475
• /
• 2000

Performance of a water-to-water multi-type heat pump system using R22 has been experimentally investigated. Total refrigerant flow rate was adjusted with a variable speed compressor and the refrigerant flow rate for two indoor units were controlled by electronic expansion valves. Evaporator outlet pressure of refrigerant and indoor unit outlet temperatures of secondary fluid were selected as controlled variables. Experiments were carried out for both cooling and heating modes using PID control method. Results show that the multi-type heat pump system can be adequately controlled by keeping control gains at certain levels for various operating conditions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.57-62
• /
• 2011

In this paper, an efficient architecture for MFVLD(Multi-Format Variable Length Decoder) which can process H.264, MPEG-2, MPEG-4, AVS, VC-1 bitstream is proposed. The proposed MF-VLD is designed to be adapted to the MPSOC (Multi-processor System on Chip) architecture, uses bit-plane algorithm for the processing of inverse quantized data to reduce the width of AHB bus. External SDRAM is used to minimize the internal memory size. In this architecture, the adding or removing each variable length decoder can be easily done by using multiplexor. The designed MF-VLD can be operated in 200MHz at 0.18um process. The gate size is 657K gate and internal memory size is 27Kbyte.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1206-1212
• /
• 1993

In this paper, an variable structure system with an integral-augmented sliding surface is designed for the improved robust control of a uncertain multi-input multi-output(MIMO) system subject to the persistent disturbances. To effectively remove the reaching phase problems, the integral augmented sliding surface is defined, then for its design, the eigenstructure assignment technique is introduced. To guarantee the designed performance againts the persistent disturbance, the stabilizing control for multi-input system is also designed. The stability of the global system and performance robustness are investigated. The example will be given for showing the usefulness of algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.33-38
• /
• 2012

As underwater channel is very complex and time-varying, don't supports good-quality for communication service. In this paper, a multi-carrier CDMA(MC-CDMA) system for the reliability and robust service in the underwater acoustic channel is proposed and analyzed for its performance. Applied variable rate algorithm to the proposed system gets a channel state information from relationship between SINR and user data-rate. Using channel state information make spectrum usage more efficient and overall system performance improved. In this paper, the performance of proposed system analyzed by simulation. And Pseudo-Random spread codes used in the system are discussed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.9
• /
• pp.810-817
• /
• 2001

Performance of a water-to-water multi-type heat pump system using R22 which has tow indoor units has been investigated experimentally. The refrigerant flow rate of each indoor unit was regulated by an electronic expansion valve and the total refrigerant flow rate of the system was controlled by a variable speed compressor. In the system, evaporator outlet pressure of refrigerant and outlet temperatures of secondary fluid from indoor units were selected as control variables. Experiments were executed for both cooling and heating modes using PID control method with fuzzy logic, and results of the test are compared with a classical PID method. In the case of PID control with fuzzy logic, the fuzzy control rules corrects PID parameters each time. Results show that PID control with fuzzy logic has the merits of quick response and reduced overshoot.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.157-157
• /
• 2000

In the fuzzy control for the multi-variable system, it is difficult to obtain the fuzzy rule. Therefore, the parallel structure of the independent single input-single output fuzzy controller using a pairing between the input and output variable is applied to the multi-variable system. The concept of relative gain matrix is used to obtain the input-output pairs. However, among the input/output variables which are not paired the interactive effects should be taken into account. these mutual coupling of variables affect the control performance. Therefore, for the control system with a strong coupling property, the control performance is sometimes lowered. In this paper, the effect of mutual coupling of variables is considered by tile introduction of a simple compensator. This compensator adjusts the degree of coupling between variables using a neural network. In this proposed neuro-fuzzy controller, the Neural network which is realized by back-propagation algorithm, adjusts the mutual coupling weight between variables.