• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.396-405
• /
• 2009

This paper describes playback downlink and telecommand uplink channel design performed for a transportable small-sized KOMPSAT(Korea Multi-Purpose Satellite) ground station. As a result of downlink channel design, required receiving performance was calculated from the threshold signal-to-noise ratio of playback signal and it was revealed that this performance can be guaranteed in 1.5 m ground station with 6.5 dB/K of G/T. For the uplink channel design, 40 dBW of EIRP was derived from the threshold signal-to-noise ratio of telecommand signal received at on-board receiver. The implemented small-sized ground station based on design was evaluated to be fully acceptable for KOMPSAT TT&C(Telemetry, Tracking and Command) system and playback downlink design without taking account of additional 3 dB system link margin was shown to be effective because it had provided constantly initial channel performance without any remarkable degradation over several years of tests with KOMPSAT and KOMPSAT-2, for both uplink and playback downlink in the elevation angle above $10^{\circ}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.991-997
• /
• 2009

Transmit beamforming is simple method to achieve the full diversity gain that is available in multiple antenna(MIMO) wireless systems. Unfortunately, the prior condition to achieve this gain requires perfect channel knowledge at both transmitter and receiver, which is impractical on account of limited feedback link. Therefore, for the practical system, codebook based feedback scheme is often employed, where the beamforming vector is selected from the codebook to maximize the output signal-to-noise ratio (SNR) at receiver, and the receiver only sends back the index of the best beamforming vector to the transmitter. In this paper we derive analytical expression of average bit error rate (BER) for the codebook based transmit beamforming MISO system over the feedback error channel. Using this analytical result, we present optimum codebook indexing scheme to improve the performance of this system. From some selected numerical examples we show that our proposed codebook indexing scheme can provide nonnegligible performance improvements in terms of average BER over the severe feedback error channel.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.92-100
• /
• 2008

Ad-hoc network is a collection of wireless mobile hosts forming a temporary network without the aid of any centralized administration or reliable support services such as wired network and base stations. Recently, Ad-hoc networks are evolving to support multimedia contents according to expansion of ad hoc multi-hop communication system. Wireless ad-hoc network is different from the conventional wired network by frequent changes in network topology, number of routers and resources, there are a number of problems in applying conventional routing protocol to ad-hoc network. The AODV routing protocol is proposed for mobile node in ad-hoc networks. AODV protocol that provides to guarantee QoS for data transmission in ad hoc networks that link break frequently occurs. In this paper, AODV routing protocol based NDIS(Network Driver Interface Specification) is implemented. We design high performance image transmission that can operate with software(AODV) for ad-hoc networks without degradation. and verify operation of AODV routing protocol on the test bed.

• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.103-113
• /
• 2006

The numerical methods of finding the optimal position of optical phase conjugator (OPC) and the optimal fiber dispersions are proposed, which are able to effectively compensate overall channels in $8{\times}40$ Gbps WDM system with non zero-dispersion shifted fiber (NZ-DSF) as an optical fiber. And BER characteristics in the system with two induced optimal parameters are compared with those in the system with the currently used mid-span spectral inversion (MSSI) in order to confirm the availability of the proposed methods. It is confirmed that two optimal parameters depend on each other, but less related with the searching procedure. The methods proposed in this research will be expected to alternate with the method of making a symmetrical distribution of power and local dispersion in real optical link which is a serious problem but the condition in the case of applying the OPC into multi-channels WDM system.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.2
• /
• pp.131-140
• /
• 2015

The mono-ski for the paraplegia designed to skiing is formed as seat bucket on the sled. The impact force transferred by snow surface during skiing is absorbed by the leg joints of normal human, but it is transferred to the human body on the seat when using mono-ski. Most of commercially available mono-ski have absorbing device and link mechanism between seat and ski mount in order to complement it. In this study we developed the comfort evaluation model that could provide skiing simulation of mono-ski with hydraulic damper and analyzed vibrational acceleration occurred during skiing uneven surface. The evaluation method used in this study is the international standard BS6841. We evaluated comfort performance of mono-ski in accordance with nozzle adjustment of hydraulic damper.

• Journal of Drive and Control
• /
• v.17 no.1
• /
• pp.37-43
• /
• 2020

An intelligent excavator can be divided into Machine Guidance (MG), semi-automatic, and unmanned by technology. The MG technology excavator is equipped with a tilt sensor on each link of the excavator and a GPS is installed on the excavator body to inform the user of the position of the excavator bucket end. Machine control (MC) technology that assists the user's work can be divided into semi-automatic and fully automatic technology. The semi-automatic MC equipment has already been commercialized by Komatsu and Caterpillar. The MC excavator is equipped with an electro-hydraulic system, sensors and controllers to control the excavator bucket end according to the user's needs. In this study, the semi-automated excavator modified based on manual excavator, is equipped with an electro-hydraulic system, a controller system, multi-sensors and a control algorithm is developed to assist in excavation work such as leveling and grading. By applying the developed technology, it was possible to confirm productivity improvement compared to manual digging and leveling work. In the future, further research to improve the accuracy of the hydraulic precision control and collaborative work with heterogeneous construction equipment such as dump truck and automated collaboration tasks technology could be developed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2372-2380
• /
• 2015

In this paper, we propose frequency allocation and path selection scheme in underlay cognitive radio (CR) networks using network coding. In the proposed scheme, we choose the path with consideration of network coding and interference temperature in underlay CR networks and propose an optimization problem to maximize the system throughput of secondary users (SUs). Then, we represent the proposed optimization problem as the multi-dimensional multiple-choice knapsack problem and give the theoretical upper bound for the system throughput of SUs by using linear programming. Finally, we compute the system throughput of SUs by using brute-force search (BFS) and link quality first (LQF) scheme in underlay CR networks. Simulation results show that the system throughput of SUs with BFS is higher than that with LQF in underlay CR networks with and without application of network coding, respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.11-21
• /
• 2011

This study intends to construct scenic byway database and to examine and suggest social experiment of scenic byway. As basis work for the experiment of the scenic byway, we build database by using ITS standard node link management system. The DB includes scenic byway routes of Korea and Japan. The analyses show that the scenic byway in both nations consists of roads, reservation, road sign, vehicle number plate, and it was found that infrastructure and system are inadequate for scenic byway. These experiment can be effectively used for scenic byway in Korea and Japan as the basis data. The results of this experiment will be useful for plan and develop a scenic byway.

• Journal of The Korean Association of Information Education
• /
• v.1 no.1
• /
• pp.74-81
• /
• 1997

The World Wide Web (Web) is one of the most popular internet tool on now, In this reason most of common user, they understand the Web is internet and Web content is also important issues on this side. However, commonly Web content created by one of Web content creator and sometime they refer the another document and link. In these kinds of environments cause tile delivery of incorrect information or linking to another Web user. There are lots of way to protect the incorrect information deliveries to Web user and the most famous one is Computer Supported Cooperation Work (CSCW). This supports the multi-user environment on single system environment, but this needs more additional things in the current internet environment Current internet defined as distributed information network not tile traditional client-server environment. Specially, Intranet environments need to support the heterogeneous system environment like several Rinds of database, systems like PC, Mac and UNIX workstation, and etc. In this reason, we need collaboration and this would serve the common user interface to all of Web user. In these paper, we review the current concept of CSCW and grouoware that are major concept of collaboration and definition, classification and problem analysis of the collaboration. Finally, we suggest the construction method of collaboration environment for Web.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.32.3-33
• /
• 2015

There exist scaling relations that link the mass of supermassive black holes with both the velocity dispersion and the mass of the central stellar cusp of their host galaxies. This implies that these two components grow in tandem. Feedback from actively accreting supermassive black holes (AGN), in the form of multi-phase gas outflows, has been argued to be the agent of this co-evolution. Here we employ the powerful GMOS integral field spectroscopy unit on the 8.2m Gemini-North telescope to investigate ionized gas outflows of luminous Type 2 AGN in the local Universe (z<0.1). Our sample of 6 galaxies is drawn from the Sloan Digital Sky Survey (SDSS) and was selected based on their [OIII] dust-corrected luminosity (>1042 erg/s) and signatures of outflows in the [OIII] line profile of their spatially integrated SDSS spectra. These are arguably the best candidates to explore AGN feedback in action since they are < 1% of a large local type 2 AGN SDSS sample selected based on their [OIII] kinematics. We combine a careful spectral decomposition of the [OIII] and $H{\alpha}$ line profiles with spatial information on ~0.5kpc scales to understand the outflow kinematics and energetics in these objects. We find clear evidence for strong outflows in [OIII] and occasionally $H{\alpha}$ that are clearly driven by the ionizing radiation of the AGN. We kinematically and spatially decompose outflowing and rotating ionized gas components. We find [OIII] to be a better tracer of AGN outflows, while $H{\alpha}$ appears to be strongly affected by both stellar rotation and outflows induced by ongoing star formation. The observed kinematics and spatial distribution of the ionized gas imply a large opening angle for the outflow. Finally, we find the projected outflow velocity to decrease as a function of distance, while its dispersion shows a more complex structure with a potentially initially increasing trend (out to 0.5-1kpc distances).