• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.68-79
• /
• 2008

Because local cities are different from large cities, they need to reflect their own characteristics of housing market. Thus in order to obtain useful implications for the establishing sound housing market in Jinju City, this paper investigated the characteristics of spatial distribution and determinant factors that affect apartment price in Jinju City. GIS representation of the apartments showed that most of old and small apartments were built in 'land readjustment project' areas executed in 1970s. On the contrary, new and large scale apartment complexes were built quite recently and distributed in the western and southern parts of the city. Next, in order to examine the factors which affect apartment price, this paper subtracted firstly several variables from the related studies. However in order to avoid multi-colinearity, variables were summarized by means of factor analysis. Then, setting apartment price as a dependant variable, 12 hedonic price models were established with 33 independent variables. As results, building age, floor area, accessibility to university and hospital, accessibility to arterial road, and stair-type building were turned out to be significant. These results will be used in making the supply and allocation plan of urban facilities and housing. Finally as conclusions this paper emphasized the need of periodic analysis of local housing market and establishing detailed housing information systems.

• Journal of Biosystems Engineering
• /
• v.8 no.2
• /
• pp.39-48
• /
• 1983

This study was performed to obtain the basic data which could be used for the modification of the manual center-burner-type rice-husk furnace into a small scale automatic type for the multi-purpose use in the farm. For this purpose, first, the utilization feasibility of the rice-husk furnace in the farm was analyzed briefly in aspects of available amount of rice-husk for the fuel, annual operation time and replaceble amount of residential heating energy with rice-husk in the farm. For the experiment a prototype furnace geared with an automatic feeding device was fabricated, and feed rate, mold size and chimney height were changed to investigate the combustion efficiency of rice-husk and thermal efficiency of the furnace. Also, optimum and limiting operational factors were observed in each treatments. The results obtained are summarized as follows. 1. If the rice-husk is intensively used for residential heating in the farm for winter season, on an average 51 percent of the total heating energy can be replaced with the rice-husk. Therefore, development of a small scale automatic rice-husk furnace was recognized to be feasible. 2. The operational condition depending on husk-feed rates was very important factor for successive steady burning operation of the given furnace. When the feed-rate was 1.5 kg/hr, the top of the burning zone should be kept at the position about 55 cm from the bottom of the combustion chamber with the periodic removal of ash (termed as steady state position), which was 18 cm above the mold waist. When the feed rates were 2.4 kg/hr and 3.0 kg/hr, the steady state position was at about 4 cm above the mold waist. 3. The mold size affected inflow rate of air into the furnace and consequently CO content in the exhaust gas. The relatively bigger mold gave positive effect on the air-inflow rate. 4. When the husk-feed rates were 1.5 kg/hr, 2.4 kg/hr, 3.0 kg/hr, the combustion efficiencies of the rice-husk were 98.5%, 97.4% and 95.0%, the thermal efficiencies of the furnace were 93.4%, 93.2% and 87.6%, and CO content in the exhaust gas were 1.21%, 1.03%, and 2.43%, respectively. The air-inflow rates were decreased with the increase of feed rates. When the amount of excess air was 30-40%, the CO content in the exhaust gas was at the minimum level. 5. When the chimney height was lowered from 260 cm to 96 cm, the air-inflow rate was slightly decreased, but the average temperature in the combustion chamber, CO content in the exhaust gas and combustion and thermal efficiencies were not changed significantly. 6. The incidental problems associated with the protytype furnace were accumulation of the ash inside the mold, accumulation of the cinder between the outer-drum of the furnace and the combustion chamber wall, and accumulation of the cinder in the chimney.

• Journal of the Korean Society for information Management
• /
• v.29 no.4
• /
• pp.143-163
• /
• 2012

The dominant model of acquiring scholarly contents at academic libraries is so called big deal where libraries subscribe to a bundle of hundreds, if not thousands of journals in a multi-year contract with fixed annual rate increase. The bid deal, started in the mid-1990s, offered a number of advantages for academic libraries and their users. However, escalating prices for these packages have become a serious issue casting doubts about the sustainability of the subscription-based model. At the moment, it appears there is no viable alternative other than pay-per-view method that is being tested at some libraries. Libraries' budget situation will remain a key factor that might change the situation. Open access started in the 2000s as a vehicle to eliminate barriers to publishing and distributing peer-reviewed scholarly journal articles. Open access publishing is witnessing two-digit growth annually. Open access articles now occupy close to 20% of two major citation databases: Scopus and Web of Science. Google Scholar service, debuted in late 2004, is now a popular tool for discovering and accessing scholarly articles from a vast selection of journals around the world. There is a call for taking Google Scholar seriously as a potential replacement of library databases amid concerns regarding the quality of journals indexed, limited search capabilities vis-$\grave{a}$-vis library databases, and monopoly of public goods. Escalating budget problems, rapid growth of open access publishing and the emergence of powerful free tool, such as Google Scholar, need to be taken seriously as these forces might bring disruptive changes to the existing subscription-based model of scholarly contents at academic libraries.

• Journal of Convergence for Information Technology
• /
• v.10 no.9
• /
• pp.251-261
• /
• 2020

The purpose of this research is to examine the relationship between motivation, reliability, satisfaction, and sustainability of YouTube content and suggest the implications needed for content consumption or production of beauty workers in the future as K-beauty's interest is increasing due to the global Hallyu craze, and beauty industry workers are also watching YouTube hair care content and exchanging the latest trends. The analysis methods included frequency analysis, factor analysis, reliability analysis, correlation analysis, and multi-recovery analysis. As a result, the correlation between the motivation for content use, reliability, satisfaction, and persistence was shown, the motivation for content use was statistically significant (+) and the impact of content reliability on YouTube content satisfaction and sustainability (a significant statistical+).

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.417-427
• /
• 2012

This study is to recognize the relationship between better life index, nursing performance and intents to leave among hospital nurses by comparison. From July 1to July 20, 2012. we collected survey results subjecting on total 700 nurses by random sampling of hospital-class medical institutes over 200 beds located on Busan & Gyeongnam, and analyzed final 677 copies. We recognized the degrees and the differences of happiness index, professionalism, intents to leave among hospital nerses and analyzed the factors impacting on intents to leave among hospital nerses through correlation analysis and multiple regression analysis between variables. The main result is as follows: First, the average of the item related to happiness index of nurse was 3.03 (5 points of scale) and the average score of professionalism was 3.09 (medium degree) but the average score of turnover intention was 3.35 (relatively high); Second, professionalism and turnover intention according to characteristics of subjects were significant statistically (p<0.05) and turnover intention indicated a significant negative relation with happiness index and professionalism; Third, a factor which mostly impact on turnover intention indicated a significant level (p<0.05) in professionalism, happiness index, general hospital, 2.01 to 2.5 million of average pay. Based on such results, as happiness index and professionalism are indicated as major factors to turnover intention, multi-dimensional viewpoint of follow-up study including further variables is required and the plan to apply nursing intervention program for reducing turnover intention is also required.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.135-145
• /
• 2019

The slope collapse can be classified into internal and external factors. Internal factors are engineering factors inherent in the formation of slopes such as soil depth, slope angle, shear strength of soil, and external factors are external loading such as earthquakes. The external factor for earthquake can be expressed by various values such as peak ground acceleration (PGA), peak ground velocity (PGV), Arias coefficient (I), natural period (T_p), and spectral acceleration (S_aT=1.0). Specially, PGA is the most typical value that defines the magnitude of the ground motion of an earthquake. However, it is not enough to consider the displacement in the slope which depends on the duration of the earthquake even if the vibration has the same peak ground acceleration. In this study, numerical analysis of two-dimensional plane strain conditions was performed on engineered block, and slope responses due to seismic motion of scaling PGA to 0.2 g various event scenarios was analyzed. As a result, the response of slope is different depending on the presence or absence of sliding block; it is shown that slope response depend on the seismic wave triggering sliding block than the input motion factors.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.3
• /
• pp.115-124
• /
• 2015

In this paper we analyse the previous (Quality of Services) and QoE(Quality of Experience) methods, and propose a high reliable network system framework and its service forwarding method that is able to provide seamless N-Screen services for proliferating disaster informations. The service satisfaction measurement, i.e., QoE, of contents consumers in N-screens services is going to be important the factor in disaster information proliferation because N-Screen services in the previous methods based on multi devices only focused on information transmission. The proposed system around these services is composed of a disaster information process framework for accepting user's service requirement, push service modules for minimizing the number of packets to be caused when carrying out the push service, and a push service controller for maximizing QoE measures. In order to provide a seamless N-Screen service on diverse screens, such as smartphone, PC, and big screen, we also have Open API(Application Programming Interface) functions. Through these results, we expect to evaluate QoS and QoE quality in the seamless N-Screen service.

• Advances in aircraft and spacecraft science
• /
• v.5 no.2
• /
• pp.225-237
• /
• 2018

The difficulties of satellite vibration testing are due to the commonly expressed qualification requirements being incompatible with the limited performance of the entire controlled system (satellite + interface + shaker + controller). Two features cause the problem: firstly, the main satellite modes (i.e., the first structural mode and the high and low tank modes) are very weakly damped; secondly, the controller is just too basic to achieve the expected performance in such cases. The combination of these two issues results in oscillations around the notching levels and high amplitude beating immediately after the mode. The beating overshoots are a major risk source because they can result in the test being aborted if the qualification upper limit is exceeded. Although the abort is, in itself, a safety measure protecting the tested satellite, it increases the risk of structural fatigue, firstly because the abort threshold has been already reached, and secondly, because the test must restart at the same close-resonance frequency and remain there until the qualification level is reached and the sweep frequency can continue. The beat minimum relates only to small successive frequency ranges in which the qualification level is not reached. Although they are less problematic because they do not cause an inadvertent test shutdown, such situations inevitably result in waiver requests from the client. A controlled-system analysis indicates an operating principle that cannot provide sufficient stability: the drive calculation (which controls the process) simply multiplies the frequency reference (usually called cola) and a function of the following setpoint, the ratio between the amplitude already reached and the previous setpoint, and the compression factor. This function value changes at each cola interval, but it never takes into account the sensor signal phase. Because of these limitations, we firstly examined whether it was possible to empirically determine, using a series of tests with a very simple dummy, a controller setting process that significantly improves the results. As the attempt failed, we have performed simulations seeking an optimum adjustment by finding the Least Mean Square of the difference between the reference and response signal. The simulations showed a significant improvement during the notch beat and a small reduction in the beat amplitude. However, the small improvement in this process was not useful because it highlighted the need to change the reference at each cola interval, sometimes with instructions almost twice the qualification level. Another uncertainty regarding the consequences of such an approach involves the impact of differences between the estimated model (used in the simulation) and the actual system. As limitations in the current controller were identified in different approaches, we considered the feasibility of a new controller that takes into account an estimated single-input multi-output (SIMO) model. Its parameters were estimated from a very low-level throughput. Against this backdrop, we analyzed the feasibility of an LQG control in cancelling beating, and this article highlights the relevance of such an approach.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.255-261
• /
• 2016

$CaCO_3$ was applied in various industries including rubber, plastics, paint, paper, food additives, and acid neutralizer, etc., owing to its excellent physical and chemical characteristics as well as various appearances of crystals and many reserves. In particular, research on controlling the structure and shape of $CaCO_3$ has attracted considerable attention recently, because the whiteness and physical characteristics of $CaCO_3$ depend on the size and shapes of the particles. In this study, $CaCO_3$ was synthesized using $CaCl_2$ and $(NH4)_2CO_3$, which has multi-shapes and structures, using a self-assembly method with a hydrothermal method. The structure and morphology of the $CaCO_3$ could be controlled by adjusting the pH and precursor concentration. In particular, the pH adjustment appeared to be a critical factor for the morphology and crystal form. In addition, the calcite and cubic shape were obtained at pH 7, while the mixed calcite, aragonite structure, and rod shapes appeared at pH 7 and over. Through an analysis of the particle formation process, the formation of the calcium carbonate particles was confirmed. The physicochemical properties of the synthesized $CaCO_3$ were analyzed by SEM, XRD, EDS, FTIR, and TG/DTA.

• The Korean Journal of Applied Statistics
• /
• v.28 no.4
• /
• pp.685-701
• /
• 2015

The low fertility rate and the unprecedented rapid pace of population aging is a significant factor degrading the national competitiveness and the social security system of Korea. The government has implemented various maternity incentives to alleviate the low birth problem; however, the policy seems in effective to solve the problem of low fertility. This study proposes a conditional birth-order specific fertility rate and investigates the policy effects of fertility transition in Korea to provide a basis for more effective policy development. The use of a conditional birth-order specific fertility rate allows for an effective calculation of the change and the effect in total fertility rate than a birth-order specific fertility rate. We compare the effects of the total fertility rate according to various scenarios that enables us to calculate how the total fertility rate can achieve the current multi-child childbirth support policy of the government and estimate how the total fertility rate can be achieved when focusing on the first or second childbirth support policy. We also summarize the research results on policy development for a practical increase in the childbirth that considers the rapid decrease in women of childbearing age (15-49 years) due to continued low fertility and present the number of childbirths in accordance with the total fertility rate.