• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.209-216
• /
• 2000

The lateral behavior of the moving web is critical to the quality of the web products. The alignment of the rollers carrying the web is found to be one of important factors to the lateral behavior of the moving web. But, the study on the effect of the tilting roller in the direction of the normal to the moving web on the lateral behavior has not been reported in the literature yet. For example, the contact roller often contacts the winding roll in a tilted fashion and causes the lateral motion of the winding web, which induces the offset on the wound roll. The lateral dynamics of the moving web induced by a tilted roller in normal direction of a web is investigated in this paper. The two-dimensional dynamic model developed by Shelton is extended to investigate the effect of a titled roller in a normal direction of the moving web on the lateral motion of the moving web. New boundary conditions are developed to solve the extended model. Computer simulation study proved that the model developed can be used to predict the lateral motion of the moving web ？ to a tilted roller in normal direction of the moving web. The lateral deflection is increased exponentially a the tilting angle is increased. As the length of web span is increased, the amount of lateral deflection was increased almost linearly for the same tilting angle. The lateral dynamics turned out to be almost independent to the operating tension. The model developed can be used to solve the offset problem of the staggered winding and also to design a new web guiding mechanism.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.165-170
• /
• 2001

In the continuos process systems, traction between a moving web and rollers is one of key mechanisms for the study of major issues including the distributed control of tension, guiding, wrinkling, winding, and scratching. Energy is transferred from the driven rollers to the web and from the web to the idle rollers through traction. The characteristics of friction play major role in the determination of the traction force between the moving web and the rollers. In this paper the characteristics of friction between the moving web and the rollers are studied. A procedure to determine the friction coefficient between the moving web and rollers is developed. An experimental setup to validate the procedure is devised. Experimental results showed that the value of traction coefficient decreases as the operating web speed increases and increases as the operation web tension increase.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1159-1162
• /
• 1995

In the continuous process systems, traction between a moving web and rollers is one of key mechanisms for the study of major issues including the distributed control of tension, guiding, wrinkling, and scratching. Energy is transferred from the driven rollers to the web and from the web to the idle rollers through traction. The characteristics of friction plays a major role in the determination of the traction force between the moving web and the rollers. In this paper, a procedure to determine the frcition coefficient between the moving web and rollers is devoloped. An experimental setup to validate the procedure is devised. Experimental results showed that the value of traction coefficient decreases as the operating web speed increases and increases as the operating web tension and wrap alngle increase.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2002년도 추계학술발표논문집
• /
• pp.74-80
• /
• 2002

A mathematical tension model for a moving web in a multi-span web handling system was derived and validated by using a simulator which includes unwinder, driven roller, winder, load cells, controllers, etc. A tension controller was designed to compensate tension disturbances generated by velocity changes of the unwinder and driven roller. From experimental results it was proved that the tension model properly expressed the tension behavior of a moving web for specific conditions. The distributed tension controller designed by using the pole-placement technique compensated the tension disturbances transfered from upsteram tension variation. Interactions between web spans including "tension transfer phenomenon" were clearly confirmed through the study. A mathematical model of lateral motion of a moving web was verified also by using the same experimental apparatus which includes displacement type guidance systems. And a feedforward control strategy was designed for more accurate control of the lateral motion of a moving web, which utilize a measured signal of the lateral displacement of web in a previous span and a more correctly identified mathematical model to estimate the disturbance of lateral motion from the previous span. This approach was turned out to be effective in improving the performance of the guidance system for more wide range disturbances.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.624-627
• /
• 2002

Experimental study showed that the existing mathematical model doesn't fully describe the lateral motion of a moving web fur different operating conditions. So, a physically interpretable model of lateral motion of a moving web in a typical web guidance system, operated at Konkuk Univ., was developed using the system identification technique. A well-known Least Square Method based on ARX model was used for the system identification. Lateral displacement of the web was measured at the exit of each span by infrared sensors. The model obtained from identifying a linear time-invariant system for a typical operating condition yields an improved prediction capability of the lateral dynamics of the moving web compared to other mathematical models proposed in literature.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2003년도 추계학술발표논문집
• /
• pp.209-216
• /
• 2003

There are two kinds of controllers in a continuous process system. One is for tension control of a moving web and the other for lateral motion control. The inter-connection between tension and lateral behaivior of web has not yet been considered in the analysis of web dynamics and designing of control stragagies. But the effect of tension variation on the lateral motion of a moving web is observed in the most manufacturing systems. In this paper, experimental studies was carried out to find out the inter-correlation between tension and lateral motion of a web using a 3-span web transport system which consists of two displacement type guiders. As a result, it was found that there are typical operating conditions that tension and lateral motion are correlated each other.

• 경영과학
• /
• 제20권1호
• /
• pp.25-36
• /
• 2003

Now that many organizations have invested a tremendous amount of money and efforts to operate Web sites on the Internet, there is a strong demand to understand the effectiveness of such investments. In other words, one of most frequent and important questions about their Web sites is "Will the current Web site management policy be effective enough to have more visitors come to our Web site\ulcorner" In this paper, a system which predicts the degree of user interest in the future to Web sites is constructed. The degree of user interest to a Web site is defined to be the visit counts for the Web site in the system. With higher the visit counts, the related site is considered to be more interesting. However, the figures of the visit counts themselves cannot explain properly the degree of user Interest in the future to the related Web sites (i.e. the effectiveness of the related Web sites). Therefore, the system also uses mechanisms which use the concept of the Moving Averages, which have been used frequently in the stock exchanges. In this paper. two prediction mechanisms are proposed and compared. The first mechanism uses the Golden Cross/the Dead Cross of the Moving Averages, while the second mechanism uses the changes of upward/downward direction of the Moving Averages. Experimental results show that the two prediction mechanisms proposed in this paper predict the degree of user interest in the future to the related Web sites very well in most cases. However, the first one is considered to be better than the second one In the sense that the second one is too much sensitive to the changes of visit counts.it counts.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.663-666
• /
• 2005

The Geography Markup Language (GML) is an XML encoding for the transport and storage of geographic information, including both the geometry and properties of geographic features. This paper uses the GML to provide extendibility and interoperability of spatial data in moving objects management system. Since the purpose of the system is to provide locations of the moving objects in the web and mobile environments, we used the GML both for presenting map data and trajectories of the moving objects. The proposed system is composed of Location Data Interface, Moving Objects Engine, and Web/Mobile Presentation Interface. We utilized the concept of Web Map Server, that is web mapping technology of OGC (Open Geospatial Consortium), to integrate map data and the location information of the moving objects. In the process of the integration, we used the standard data model and interfaces while defining new application schema. Since our suggested system uses open spatial data encoding and interfaces, both extendibility and interoperability are guaranteed.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.84-89
• /
• 2001

The alignment of the rollers carrying the web is found to be one of important factors to the lateral behavior of the moving web and to the quality of the final web products. But, the perfect alignment of the rollers is not always possible and the web itself can be cambered. Thus the control of lateral behavior of the moving web is critical in the most of web handling systems. The web guiding system that adjusts the angle of the alignment between two adjacent rollers is commonly used in industry. But, in this paper a new web guiding system is proposed by using the lateral dynamics of the moving web induced by a tilted roller in normal direction of a web. The computer simulation study was carried out to verify the steering performance of the suggested guiding system. Computer simulation study shows that the performance of the new guiding mechanism is better than that of an existing guiding mechanism.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.340-342
• /
• 2003

Location based services based on positions of moving objects are expanding the business area gradually. The location is included all estimate position of the future as well as the position of the present and the past. Location based routing service is active business application in which the position information of moving objects is applied efficiently. This service includes the trajectory of past positions, the real-time tracing of present position of special moving objects, and the shortest and optimized paths combined with map information. In this paper, we describes the location based routing services is extend in distributed web GIS environment. Web GIS service systems provide the various GIS services of analyzing and displaying the spatial data with friendly user - interface. That is, we propose the efficient architecture and technologies for servicing the location based routing services in distributed web GIS environment. The position of moving objects is acquired by GPS (Global Positioning System) and converted the coordinate of real world by map matching with geometric information. We suppose the swapping method between main memory and storages to access the quite a number of moving objects. And, the result of location based routing services is wrapped the web-styled data format. We design the schema based on the GML. We design these services as components were developed in object-oriented computing environment, and provide the interoperability, language-independent, easy developing environment as well as re - usability.