• 제목/요약/키워드: Moving wall

검색결과 210건 처리시간 0.032초

침구치료를 통한 Wallenberg's syndrome 환자의 연하장애 치험례 (Case Report on Dysphagia Related to The Wallenberg's Syndrome Improved by Acupuncture Therapy)

  • 윤종민;박세욱;이선우;손지우;김용정;이승언;조창현;조윤성;이인;문병순;이민구
    • 동의생리병리학회지
    • /
    • 제19권6호
    • /
    • pp.1701-1705
    • /
    • 2005
  • Dysphagia is Swallowing disorder characterized by difficulty in oral preparation for the swallow or in moving material from the mouth to the stomach. Dysphagia is the one of the most symptom of CVA and predisposes to medical complications such as aspiration pneumonia in poststroke patients. This study was designed to report the clinical effects of acupuncture for dysphagia on a patient with Wallenberg's syndrome. 8 acupoint were used and videofluoroscopic evaluation were performed. According to the above evaluation, 'Oral transit time' decreased within 1.5 sec and 'Coating of pharyngeal wall after swallow' were disappeared. The above results suggest that acupuncture is beneficial for dysphagia.

우리나라 수리조선의 경쟁력 및 경제성 평가에 관한 연구 (A Study on the Evaluation of Competitiveness and Economic Feasibility of Ship Repair Industry in Korea)

  • 김덕섭;신상훈;신용존
    • 한국항만경제학회지
    • /
    • 제38권3호
    • /
    • pp.69-86
    • /
    • 2022
  • 본 연구는 초대형선 도입으로 대형선 수리 수요가 증가하고 있으며, 해상 오염물질 규제강화로 스크러버와 선박평형수처리장치를 부착하는 선박개조 시장이 확대되고 있는 상황에서 우리나라 대형 수리조선소의 건립 필요성을 고찰하고, 수리조선소 경쟁력 결정요인들을 도출하여 경쟁력을 평가하였으며, 수리조선소 건립 운영의 경제적 타당성을 검증하였다. 수리조선소의 경쟁력 결정요인에 대한 AHP 분석결과, 수리조선소 경쟁력 결정요인의 중요도는 입출항 안전성, 수리기술력, 도크 및 안벽시설, 수리비용, 수리기간(납기준수), 수리 부품 조달 등의 순서로 나타나 해운선사 및 선박관리회사들은 수리조선소를 선택함에 있어서 수리조선 인프라와 수리기술 및 품질 등을 가장 중요하게 고려한다는 것을 알 수 있다. 향후 건립될 부산항 수리조선소의 경쟁력에 대한 AHP 분석에서는 이동 거리, 수리서비스 품질, 수리부품 조달과 입출항 안전성, 수리 기술력, 도크 및 안벽 시설, 수리기간(납기준수) 순으로 나타났다. 이는 부산항 입항 선박들이 기항 시에 바로 이용할 수 있으므로 이동거리 요인의 경쟁력이 가장 높으며, 해운기업들이 수리조선소를 결정함에 있어서 중요하게 판단하고 있는 경쟁력 요인 대부분에서 부산항 수리조선소의 경쟁력이 높다는 것을 나타낸다. 부산항 수리조선소의 건립 및 운영 타당성을 비용 편익 분석(cost-benefit analysis)한 결과, 순현재가치는 4,356억원, 내부수익률은 9.8%로 사회적 할인율(4.5%)보다 높으며, 비용 대비 편익 비(B/C)가 1.167로 높게 나타나 경제성 타당성(economic feasibility)이 있는 것으로 나타났다. 연구결과 부산항 수리조선소의 필요성과 경제적 타당성이 충분히 확보되고 있으며, 경쟁력에 대한 평가도 높게 나타나므로, 실무적 관점에서 본 연구는 부산항 수리조선소 건립의 논리적 타당성과 사업 추진의 이론적 기반을 제공할 수 있을 것이다.

공연에서 나타나는 '전이'와 배우의 '심리적 경계'에 관한 연구 (Study on the Performer's Transference and Mental Borderline in a Performance)

  • 김종구
    • 공연문화연구
    • /
    • 제25호
    • /
    • pp.57-89
    • /
    • 2012
  • 일반적으로 공연을 준비하는 배우들은 처음 텍스트(희곡)를 접하면서 배역과 배우 자신과의 경계를 허물려는 노력을 통해 일상의 공간에서 극중의 공간으로 이동하는 심리적 전이과정을 경험하게 된다. 이러한 '전이'는 실제로도 나타난다고 할 수 있는데 무대에 서기전까지 분장실이나 윙(무대에 등장하기 직전의 공간), 그리고 무대(관객을 접하는 공간)라는 물리적 공간이 그것이다. 공연을 하는 배우는 공연기간이 완전히 종료되는 순간까지 끊임없이 반복적으로 심리적 물리적 공간들을 이동하게 된다. 이렇게 각각의 공간으로 이동하는 것은 '전이'이며, 이 '전이'과정 속에서 배우들이 경험하게 되는 심리적 변화의 지점을 '심리적 경계'라고 할 수 있을 것이다. '심리적 경계'는 실제 배우들이 각각의 공간에서 전이되는 순간 느끼는 심리적 양상들을 통해 그 존재 자체를 유추할 수 있다. 배우의 '심리적 경계'를 알 수 있는 변화 양상 중에서 가장 대표적인 예가 바로 '긴장', '불안' 등으로 표출되는 '무대공포'인데, 연구에 따르면 가장 많은 수의 배우가 무대에 등장하기 직전의 공간에서 이 같은 심리적 양상을 경험하게 된다고 한다. 즉 회피의 감정이 높게 나타났다. 본 연구는 공연을 완성해 무대에서 구현하기까지 과정 중에서 배우가 경험하게 되는 심리적 물리적 공간과 이를 관통하는 전이과정에서 나타나는 '심리적 경계'와 배우의 심리적 변화에 대한 관계를 규명해보고자 한다. 첫째, 선행연구를 통해 심리적 경계개념을 이해하고 이를 기반으로 배우가 경험하는 '공간'과 그 전이에서 나타나는 '심리적 경계'에 대한 개념을 재정립하였다. 둘째, 공연과정에서 나타나는 '전이영역'을 물리적 공간과 심리적 공간으로 재분류하여 개념 정리를 하였다. 셋째, '심리적 경계'를 체험하는 배우들의 실제 사례 분석을 통해 긍정적 요소로 작용가능한 '경계'의 다각적인 활용방안을 모색해 본다. 공연을 하는 배우가 경험하는 심리적 현상은 무대공포 등의 부정적인 측면이외에도 긍정적인 측면도 있음을 부정할 수 없다. 전이 영역에서 일어나는 긴장이 배우에게 긍정적이고 에너지화로 발전되기 때문이다. 이러한 '전이'와 '심리적 경계'의 관계에 대한 연구를 통해 공연중 배우가 경험하는 '심리적 경계'에서 실제 배우가 어떤 변화를 일으키며 심리상태가 유지되어 공연의 전 과정을 수행하는 것인지를 분석하여 무대공포, 부끄러움 등으로 발생하는 스트레스와 집중력을 확인하고 이를 기반으로 정체성의 다변화와 방어기제로 활용되는 무대 현존의 긍정적인 요소를 찾아본다.

아시아 Kaftan양식에 관한 연구 (A Study on the Kaftan Style in Asia)

  • 오춘자
    • 복식
    • /
    • 제35권
    • /
    • pp.45-66
    • /
    • 1997
  • This thesis is a study on the kaftan styles iin Asia. The purpose of he study was to examine the origin o the kaftan concentrating on the history and cultural backgrounds of nomads in he Western Central and North Eastern Asia. Secondly for more thorough study and expla-nation on how these kaftans contributed to East-West trade along the silk road. wall paintings and miniature illuminations along Oasis roads persia and Saracen period were compared, Also real kaftans were compared and analyzed the characteristics of Western (Turkey palestine) Central(Kazakistan Uz-bekistan Tadzhistan Qyrgyztan Turkmenistan) and the North Eastern Asian(Mongol) area. Thirdly an attempt has been made to provide the North Eastern Asian(Mongol) area. Thirdly an attempt has been made to provide the style classifications according to their peculiarities of the various kaftans as well as how kaftan gave important influences on custumes of different religious sects. The kaftan is a long coat-like garment with front openings fastened with long sash having an extra long sleeves which were worn by middle and high class nomadics throughout the West Central and North Eastern Asia This type of kaftans were a basic clothing for nomadics since they were constantly moving fromone to another areas on their horse back riding. They also wore tight trousers with boots. Kaftans seem to be originated from nomads of Steppe around B.C. 800 On B. C 400 west asian areas such as Solokha Kul-oba Kulogan had pictures sculptues on vases showing kaftans of half coat type length with front opening tied with band. Also the materials used were the products of animals such as wool or felt with animal designs showing Scythian nomads. In the North Eastern Asia Hsiung-Nu were active in Kazakha North Altai and Mongol The Clothing and fabrics exfavated near Noin-ula Pazyrik showed many samples of kaftan with trousers with other interment be-longings with a corpse around B.C 300 to A. D 100 when trades along the silk roads were proven by many historians Kaftans excavated in this area wore red front opening silk materials which suggesting settling down of nomads. in he central Asia Dol-gull near Altai mountain area were mainly miners who later had many trades with Persia and Bizantine. After Dol-gull Bezeklik temple Samarkant Kizil cow Budda sculture wall paintings of Astana tomb showed typical kaftan of this re-gion. These were both hip covered length as well as long coat with narrow sleeves. Es-pecially they had different color band fron the main kaftan with grogeously and splendously designed silk. In perusia during A. D 1400 to 1600 minia-ture illumination showed kaftan as a high class symbol more than clothing purpose. They had best quality silk with extra long sleeves draping and had a layers of kaftans one on top of anther as a symbol of wealth These Kaftans with different colors and designs were even more beautiful with their effective combinations and contrast of colors. On the other hand the lower class common people and servants wore simple kaftan with the front part of the kaftan were slipped into the belt in order to be more active and con-venient to work, The real kaftans discovered at Topkapi Saray palace of Turkey from A. D 1300 to 1900 were also compared. These kaftans were very numerous in numbers as well as designs The materials and designs used were also vari-ous such as Chinese to Italian silk. The shaped and pattern itself were not much different from the previous nomad's Kaftans. The Palestian kaftans remained were from the beginning of 19th and 20th century. Since this area is hot and dry desert they used black and navy blue colors mostly in order to exclude the sun lights. The patterns used were similar to Nomads and Bedouin with cross stiches and patch work decorations. In the central Asia they had similar life style and natural environmental cnditions with Turkish tribe which resulted in similar kaftan styles as nomads. Mongols conserved basic patterns of kaftan since Cinggis Khan with deep folding in order to keep warm. At last the kaftans studided in this thesis were classified in to four such as half coat long coat jacket and vest style. A pattern used in the Central Asia were zigzag and ani-mal design whereas in the West Asia were floral plant arabesk and circle pattern. As I discussed previously kaftan styles of nomads in the Asia maintained its basic pat-tern throughout the history except slight changes in color gusset sleeve shapes. These slight changes were made according to the need to adapt the need of environmental natu-ral conditions, The reason for aboriginality of kaftan in Asia was its simplicity and con-venience Most interesting fact is that for all these years Mongols are still wearing kaftan in their life ensuring us that they art the preserves of old kaftan. Since this thesis dealt enormous Asian regions I had a limitation of not being able to cover the Far Esatern asian areas such as Korea China and Japan how these kaftans were influenced in their clothing history as well as Eastern and Western culture. This topic along with the studies on materials and designs of patterns of kaftan will be another research project in the future.

  • PDF

무령왕릉보존에 있어서의 지질공학적 고찰

  • 서만철;최석원;구민호
    • 대한자원환경지질학회:학술대회논문집
    • /
    • 대한자원환경지질학회 2001년도 제17차 공동학술강연회 및 춘계학술답사
    • /
    • pp.42-63
    • /
    • 2001
  • 무령왕릉의 보존대책을 수립하기 위하여 누수 현상, 고분구조 벽체거동 상황 및 구조안전점검, 고분 내에 서식하는 조류의 제거, 고분내 습기 및 결로현상 제거를 위한 공기조화시설 등을 포함하는 종합 정밀저사를 1996년 5월 1일 부터 1997년 4월 30일 까지 1년간 수행하였다. 이러한 연구를 수행하기 위하여 기초 지반에 대한 정밀측량, 고분 내외부의 년중 온습도 모니터링, 지반의 내부물성 파악을 위한 지구물리 탐사, 시추 자료에 대한 각종 물성실험, 지반의 투수계수 측정 및 지구화학적 분석을 실시하였다. 고분 내외부에 대한 정밀측량 결과 봉분 중심의 현실 중심보다 북동쪽으로 5m 이격되어 있다. 무령왕릉의 경우는 발굴 당시에도 유사한 분포를 하였으나, 이로 인하여 불균형적인 토압을 발생시키는 원인이 되고 있다. 벽돌깨짐 상황 조사결과 무령왕릉의 조사 대상 벽돌 6025장중 1972년에는 435장 파손되었던 것이 1996년 조사결과 1072장이 파손된 것으로 밝혀져 파손율이 2.5배로 증가하였다. 6호분의 경우는 이보다 더 심하여 벽돌 파손율이 2.9배로 증가하고 있다. 1972년 상황은 약 1450년간 진행된 것이고 1996년의 상황은 불과 24년간 진행된 것임을 감안할 고분이 발굴된 이후 벽돌의 균열은 상당한 가속도로 진행되어 온것이 사실이며 이대로 진행된다면 더욱 더 가속화될 것으로 판단된다. 고분벽체의 거동상태를 계측한 결과 무령왕릉 동측벽의 경우 우기와 건기에 각각 2.95 mm/myr및 1.52 mm/myr의 거동을 보여 우기에 지하수 유입에 의한 지반의 약화로 인하여 건기보다 2배정도 거동하는 양상을 보인다. 한편, 연도 입구의 호벽은 건기에 전실쪽으로 0.43 mm/myr, 연도쪽으로 2.05 mm/myr의 거동을 보여 무령왕릉에서는 가장 심한 거동을 보이고 있다. 6호분의 거동현황은 건기에만 측정된 바, 현실의 동측벽과 서측벽이 각각 벽체 뒤쪽으로 7.44 mm/myr, 현실안쪽으로 3.61 mm/myr의 거동을 보여 조사대상 5호분, 6호분, 7호분, 중 가장 심한 거동을 보이고 있다. 이는 고분 벽돌의 깨짐이 6호분이 가장 심하다는 사실과 무관하지 않은 것으로 판단된다. 봉분내부의 토양층구조에 대한 지오레이다 영상단면을 분석한 결과 무령왕릉 연도상부의 누수지방지층이 심하게 균열되어 있음을 발견하였다. 이 곳은 고분내부로 직접누수가 발생하는 곳이다. 직접누수와 지하수 형태로 유입된 침투수는 고분군 주위의 지반의 함수비를 증가시켜 지반의 지지력을 약화시키고 또한 고분내로 서서히 유입되어 고분내부의 습도를 100%로 유지시키는 주된 원인이다. 이러한 높은 습도는 고분내의 남조류의 번식을 가져왔으며 남조류의 번식은 현재 6호분이 가장 심각하고 7호분이 우려되는 수준이며 5호분은 문제가 없는 것으로 판단된다. 이와 같이 고분군의 발굴후 인위적인 환경변화와 지속적인 강우침투 및 배수 불량의 영향은 고분군의 안정성에 상당한 위험을 초래하였으며, 현 상태는 각 고분에 대한 보강이 불가피한 것으로 판단된다. 고분 벽돌의 깨짐, 고분 벽체의 거동, 조류의 서식등을 포함하여 송산리 고분군에서 발생되고 있는 보존상의 제반 문제점들을 일차적으로 누수 및 침투수에 의한 결과이다. 그러므로 무엇보다도 고분군 내부 및 고분 주변으로의 강우 및 지하수 침투를 막는 차수 대책이 시급한 것으로 판단된다. 또한 이미 발생한 변위가 더 이상 진행되지 않도록 하중을 경감하고 토압의 균형을 이루는 보강대책이 시급한 실정이다. 고분군의 보존대책으로는 고분의 구조안전에 관하여 근본적인 구조변경이 불가피한 직접 보강대책보다 간접적인 보강대책이 바람직한 것으로 판단된다. 간접적 보강대책으로서는 현 봉분규모의 축소, 불균등토압의 조정, 강우침투 방지를 위한 최종복토시스템, 유도배수구의 설치 및 능선 상부로부터의 지하수 차단시설을 포함한다. 이러한 차수대책은 고분군의 제문제를 해결하는 가장 근본적인 대책이라 할 수 있다. 고분내 결로현상 및 습기 제거를 위하여 항온항습장치를 전실에 설치하고 덕트를 통하여 고분내 현실로 순환시키는 방법을 제안하며 외부 온도의 영향을 덜 받게 하기 위하여 전실상부 토양을 현재보다 두껍게 하고 전실의 천정마감재를 열전도도가 낮은 목재로 교체하며 출입문의 이동등을 제안하였다. 금번 조사 연구를 통하여 얻어진 각종 보수 및 보존대책은 고분구조 자체에 가능한 한 최소의 변화를 주면서 가장 시급한 문제점부터 해결하도록 제시되었다. 설계 및 시공단계에서는 보수의 경중을 가려 순서에 입각하여 이루어져야만 하며 설계 및 시공단계에서 고분의 구조안전에 영향을 주지 않도록 각별한 주의가 요망된다. 끝으로, 상기의 보수대책이 실시된 후 이에 대한 평가 및 향후의 영구 보존을 위한 벽체경사 계측, 함수비 및 지하수위 계측, 온습도 측정 등을 포함하는 사후계측시스템은 필수적이라 할 수 있다. 각종 계측자료를 이용한 장기적이고도 세심한 분석을 통하여 완벽한 보존 관리가 이루어져야할 것으로 사료된다.로 사료된다.

  • PDF

전립선암의 영상유도방사선치료 시 격일 콘빔 CT 적용의 유용성 평가 (Evaluation of Every Other Day - Cone Beam Computed Tomography in Image Guided Radiation Therapy for Prostate Cancer)

  • 박병석;안종호;김종식;송기원
    • 대한방사선치료학회지
    • /
    • 제26권2호
    • /
    • pp.289-295
    • /
    • 2014
  • 목 적 : 영상유도방사선치료 시 사용하는 콘빔 CT는 치료자세 오차를 확인하는 중요한 수단이지만 피폭선량을 증가 시키는 단점이 있다. 이에 본 연구는 콘빔 CT의 시행주기를 격일로 하는 시나리오를 만들어 유용성을 평가하고자 한다. 대상 및 방법 : 콘빔 CT를 이용하여 세기변조방사선치료를 받은 전립선암 환자 9명을 대상으로 실제 치료 시 매일 콘빔 CT로 치료자세 오차를 분석하여 보정한 값을 바탕으로 격일로 콘빔 CT를 시행하는 시나리오를 만들었다. 시나리오에서 콘빔 CT를 시행하지 않은 날의 치료자세 오차 값을 실제 치료 시의 치료중심점에서 이동하여 치료계획시스템(Pinnacle 9.2, Philips, USA)에 적용한 후 실제 치료와 동일한 조건으로 재 치료계획을 수립하였으며, 이를 바탕으로 PTV(Planning Target Volume)와 정상장기의 선량분포를 비교 분석하였다. 결 과 : 매일 콘빔 CT를 시행하였을 때의 치료자세 오차 값을 기준으로 격일로 콘빔 CT를 시행하는 시나리오에서는 X, Y, Z축으로 각각 $0.2{\pm}0.73mm$, $0.1{\pm}0.58mm$, $-1.3{\pm}1.17mm$ 차이가 나타났다. 이를 치료계획에 적용하여 재 치료계획을 수립하여 선량분포를 평가한 결과는 매일 콘빔 CT를 시행한 결과와 비교하여 PTV의 Dmean : -0.17 Gy, $D_{99%}$ : -0.71 Gy, 차이가 나타났다. 정상 장기는 직장 벽의 $V_{66}$ : 1.55%, 방광의 $V_{66}$ : -0.76% 차이가 나타났다. 결 론 : 격일로 콘빔 CT를 시행하였을 경우 콘빔 CT에 의한 피폭선량을 감소시키고 촬영으로 인한 추가적인 치료시간을 줄여 줄 수 있다. 또한 PTV, 정상장기의 선량분포의 차이가 크지 않으므로 환자의 상태의 따라 격일 콘빔 CT의 적용을 고려할 수 있을 것으로 사료된다.

서울시 상상어린이공원의 창의 놀이 행태 분석 연구 (A Research on the Creative Behavior of Children's Plays in Sangsang Children's Park, Seoul City)

  • 강영재;김요섭;조세환
    • 한국조경학회지
    • /
    • 제40권5호
    • /
    • pp.109-118
    • /
    • 2012
  • 본 연구는 서울시에서 '상상어린이공원 조성사업'으로 조성된 어린이 놀이시설물에서 나타나는 어린이들의 창의 놀이 행태 분석 및 창의 놀이 유형에 관한 연구를 수행함으로써 어린이들의 창의성을 함양하고 제고하기 위한 상상어린이 공원 놀이시설의 향후 개선방향에 대한 기초자료제시를 목적으로 수행하였다. 본 연구는 2008년에서부터 2010년까지 조성된 상상어린공원 제2차 사업지 6개소를 대상으로 놀이시설 도면 분석 및 놀이 현상에 대한 현장 비디오 촬영을 통한 관찰조사방법을 통해 수행하였으며, 본 연구의 결과는 다음과 같다. 첫째, 상상어린이공원의 놀이시설에는 모두 21개 유형의 창의 놀이 행태가 나타나는 것으로 분석되었다. 둘째, 상상어린이공원의 중심시설이 조합놀이대로 디자인되어 있기 때문에, 놀이시설의 이용률은 절대적인 면에서 조합놀이대의 이용률이 높은 것으로 나타나고 있으나, 창의 놀이 행태는 그네, 흔들말과 같은 독립놀이시설에서 상대적으로 더 많이 나타나고 있었고, 셋째, 어린이들의 창의 놀의 행태는 조합놀이대와 같은 고정된 놀이시설보다는 그네, 흔들말과 같은 유동적 놀이시설과 모래사장과 같은 공간적 놀이시설에서 더 다양하게 나타나고 있었다. 넷째, 어린이들의 창의 놀이 행태는 유창성, 융통성, 독창성, 정교성, 상상력 등 5개 창의성 요소에서 분석될 수 있었으며, 창의 놀이 행태는 5개 창의성 요소에서 중복되어 나타나는 것으로 분석되었다. 다섯째, 이상의 결과에서 어린이들의 창의력을 제고시키기 위해서는 상상어린이공원의 조합놀이대 시설은 유동적 및 공간적 놀이시설과 복합화 하여 디자인되어야 할 필요가 있으며, 유창성, 융통성, 독창성보다는 상대적으로 적게 나타나고 있는 정교성 및 상상력을 제고하기 위해서는 공간적 놀이시설이나 공작형 놀이시설, 그림을 그릴 수 있는 화벽시설 등과 같은 놀이시설이 도입되어야 할 것으로 사료되었다.

동북아세아(東北亞細亞) 고(袴)의 발생(發生) 및 전파(傳播)에 관(關)한 연구(硏究) - $4{\sim}7$세기(世紀) 중심으로 - (A study on the origination and transmission of Koh(袴) in Northeast Asia-from the 4th century to 7th century)

  • 박경자;이진경
    • 복식
    • /
    • 제15권
    • /
    • pp.177-194
    • /
    • 1990
  • Koh(袴) was a type of dress worn on the lower part of the body which was commonly used in the Northeast Asia. It was originally used by the Northern race for the need of nomadism or hunting. The origin of the Koh which appeared in the area would be found from the trousers of the Huns who influenced in the Northeast Asia, and became in the part of the Scythian culture. The Scythians are the nomadizing race inhabited in the Northern Caucasas on the wast of the Black Sea and influenced on the inland Eurasian steppe as the first typical horse-riding race. The objectives of Koh which had been worn in the Scythian, Mongolia, Korea as well as Japan as a part of Dongho dress and ornaments and to contemplate the transmission process by cultural exchange among different races for the period from 4th century to 7th century. 1. The Origination of the Koh The Koh was originated by the environmental factor to protect the cold in the North but also from the heat in the South, and was changed and developed as gradually satisfying to the needs of the times. In the Northeast Asia the Koh was in the class of the Northern Chinese garment, and was used widely by the horse riding Scythians who moved widely from the Eurasian inland to Japan. The oldest original which could reflect the type of the Northern clothes was a pair of trousers discovered in the Huns remains of Noin Ula. This showed the exact form of hunting clothes and had a similar form with the Korean female tro-users. Since the same form of trousers drawn on the wall painting of which was excavated 4-5th century ancient Koguryo(高句麗) tomb was the same form the trousers of Noin Ula seemed to be the original form of Koh in the Northeast Asia. 2. The Chinese Trousers It was the time of the King Mooryung(武靈王) in the Cho(趙) Dynasty B.C. 3th century that the trousers used regularly in China. However, the Koh had been used as undergarment which functioned for the protection of the cold not the horseriding garment. The trousers seemed to be not very obviously shown off since the Poh (袍) was long, but mainly used by the people from lower class. As people learned the adapted the trousers. It was essential for the times of war and quarrel. The king himself started wearing the Koh. The Chinese trousers were influenced by the Huns, the Northern clothes of the Scythian culture, and similar to the Korean clothes. 3. The Korean Trousers Korean was a race bared from the Eastern foreign group. It was obvious that the clothes was Baji-Jeogori(바지 저고리), the garment of the Northern people. This had the same form of the Scythian dress and ornaments which was excavated from the Mongolian Noin Ula. The Scythian dress and ornaments were influenced from the Ancient West Asia Empire and transmitted to the Northeast Koguryu by the horseriding Scythian. The trousers were kept in the traditional style by the common people in Korea were transmitted to Japan which were for behind in cultural aspect, as well as got used to the Chinese as the efficient clothes though active cultural exchange. 4. The Japanese Trousers The ancient Japanese clothes were influenced by the Southern factor but not the form of the Koh. As the Korean people group was moving towards Japan and conquer the Japanese in the 4-5th century, however, North Altaic culture was formed and at the same time the clothes were also developed. The most influenced clothes at this time were those of Baekge(百濟) and the trousers form called Euigon became the main form. Because of the climatic regional factor, it was tied not at the ankle but under the knee. From the view the ancient Japanese clothes disappeard about that time, it could be due to the conquest of the culturally superior race but not the transmission of the culture. In the latest 7th century both the Chinese and Japanese dress forms were present, but the Dongho(東胡) dress and its ornament from Korea was still the basic of the Japanese dress form.

  • PDF

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF