• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.209-213
• /
• 1998

In the paper, we present the design procedure and analysis the fundamental characteristics for Linear DC Motor(LDM) using permeance method and finite element method (FEM). Designed LDM is made of two permanent magnets, three iron core and armature windings. For the design of the LDM, first of all it is necessary to calculate the air gap flux density and thrust force, after that to determine core size, the numbers of winding turns, winding width, etc. To demonstrate the method of caculation yields the right results, we used Maxwell program package for computing magnetic fields. Finally we find that the proposed design procedure in this paper is effective to design of LDM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.91-93
• /
• 1998

In this paper 30 kVA superconducting generator's transient-state electromagnetic analysis by FEM is described. The transient-state analysis by moving air gap technique was performed to analyze its 3 phase sudden short circuit characteristics. External circuit components were connected to generator model with end-winding resistance and inductance.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.77-82
• /
• 2011

The piston-cylinder mechanism is widely adopted in the hydraulic machine components. In these cases, the hydrodynamic pressures are generated in the clearance gap between the piston and cylinder under lubrication action of the piston. Under the eccentric and tilted condition of the piston in the cylinder bore, the non-symmetric pressure distributions in the circumferential direction result in lateral forces. When the lateral forces act as increasing the eccentricity and tilting ratios, excessive wear can be result in cylinder and piston which are well known 'hydraulic locking' phenomena. In this paper, the hydrodynamic pressures generated in the clearance are measured using a stationary piston and moving cylinder apparatus. The experimental results showed that the hydrodynamic pressure distributions are highly affected by the speed and eccentricity of the cylinder and the oil viscosity.

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.22-28
• /
• 2009

In order to optimize the polishing process, Run to Run control scheme has been applied to the micro mold polishing in this study. Also, to fully understand the effect of parameters on the surface roughness a design of experiment is performed. By linear approximation of main factors such as gap and rotational speed of micro quill, EWMA (Exponential Weighted Moving Average) gradual mode controller is adopted as a optimizing tool. Consequently, the process converged quickly at a target value of surface roughness Ra 10nm and Rmax 50nm, and was hardly affected by unwanted process noises like initial surface quality and wear of magnetic abrasives.

• 한국CDE학회논문집
• /
• 제22권2호
• /
• pp.190-201
• /
• 2017

This paper proposes how to solve a problem of FDM 3D printer's irregular output when changing volume of extrusion, adjusting movement speed of the printer's head and a way to fill new inner part. Existing slicers adjust directly to change the rotation speed of the stepper. In this method, the change of the extrusion area is delayed due to the gap between the stepper and the nozzle, so that precise control is difficult. We control the extrusion area adjusting the moving speed of the print head and making constantly the rotation speed of the stepper. Thus, the output time can be shortened by generating an efficient path having a short travel distance. For evaluation, we applied our method to lithophanes with detailed variation. Comparing existing methods, our method reduced output time at least 30%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.86-88
• /
• 1994

In this paper, we present the design procedure and analysis the fundamental characteristics for Linear DC motor using permeance method and finite element method. Designed LDM is made of two permanent magnets, three iron core and amateur windings. For the design the LDM, first of all it is nessary to calculate the air gap flux density and thrust force, after that to determine core size, the numbers of winding turns, winding width, motor cross section area and losses in the coil. Also, we analysis the fundamental characteristics for implemented LDM according to proposed design procedure, and we find that the implemented LDM generated constant thrust force for costant current as long as iron of core is not saturated. Finally, we find that the proposed design procedure in this paper is effective to design and implementation of LDM.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.98.1-98
• /
• 2001

An actuator using a permanent magnet and solenoid is proposed and designed in this paper. Its design concept is composed of a driving force generation, a guide mechanism, and a symmetric structure. At first, Driving Force generation uses a concept that is a change efflux by using a permanent magnet and solenoid. A permanent flux is generated by a permanent magnet. Changeable flux is created by a variable current flowing through coil such the solenoid. The direction of this flux is changed due to current flowing through coils. The combination of permanent and changeable fluxes make various flux densities between yokes of moving part and fixed yokes. And then, the flux densities create forces(F), which are used to drive this actuator, in lower and upper gap. In this actuator ...

• International Journal of Computer Science & Network Security
• /
• 제23권2호
• /
• pp.210-226
• /
• 2023

It is difficult to transform a blockchain initiative from the feasibility stage to the fully commercialized the technology's products or services, especially considering the significant investment required and the lack of studies on the benefits and barriers from deployment perspective. Whereas some organizations have come up with their own solutions to moving beyond the feasibility stage, commercial applications do not yet exist and few organizations are willing to invest beyond the prototype phase and fill in the gap between the expected and actual business value of these types of projects. This study aims to develop a blockchain model using a survey to gather qualitative data on experts' opinions on the deployment of blockchain technology. Our model will measure how business professionals could take advantage of blockchain's disruptive technology to develop business opportunities. This study's contribution is to show blockchain technology's potential strategic business value. The findings from this exploration include the prospective for delivering comprehensions to businesses for different creating investment choices on the embracing of the blockchain technology.

• International Journal of Computer Science & Network Security
• /
• 제23권8호
• /
• pp.107-112
• /
• 2023

World is moving towards digitization at a rapid pace, so the enterprises have developed information systems for management of their business. Empowering educational institutes with information systems are become very important and vital. Doing everything manually is very difficult for students, teachers and staff. Information system can enhance their efficiency and save a lot of time; this research proposed system will solve this issue by providing services like class room reservation, e-library facility, online submission etc. in a secured environment. Up till now limited attention has been paid to utilize robots and drones for automation inside educational institutes. Our proposed system incorporates robots and drones to fill this gap in automation being used in institutes. Through this research, the aim is to improve the efficiency of learning and services in educational institutions or universities.

• 한국도로학회논문집
• /
• 제12권3호
• /
• pp.27-35
• /
• 2010

Asphalt Plug Joint(APJ)는 통상 무게비로 20%의 역청(bitumen)과 80%의 골재로 구성된 역청 혼합물을 이용하여 포장 사이의 신축이음부를 메꾸는 형태의 신축이음장치로, 도로 포장과 신축이음부의 매끄러운 연결을 가능케 하여 평탄성을 확보하면서 재료의 특성을 이용하여 교량 상판의 신축을 자체적으로 흡수하도록 되어 있는 매설형 신축이음장치이다. 그러나 APJ은 6-7년의 사용주기를 가지고 설계되지만 때때로 시공 후 6개월 내에 조기파손의 사례가 나타나고 있다. 이러한 조기파손은 잦은 보수 공사로 인한 교통정체 등을 유발하며 이로 인한 사회적 비용은 이음장치의 설치비용을 훨씬 상회한다. 이에 본 연구에서는 APJ의 단점을 극복할 수 있는 새로운 시스템인 Buried Folding Lattice Joint(BFLJ)을 개발하였고 시험체를 제작하여 실험을 통해 기존 시스템과 성능을 비교 분석하였다. 실험결과 APJ는 신축에 의하여 철판 양끝에서 변형이 발생하여 표면으로 확산되었다. 이 결과로 철판 끝을 따라 발생하는 아스팔트 혼합물의 변형집중으로 인한 인장균열과 접합부의 부착파괴 현상이 발생하였으며 이것이 조기파손의 원인이 된다는 것을 알 수 있었다. 반면 새로 개발된 BFLJ의 경우는 움직이는 스터드를 사용하고 고성능 재료를 사용함으로써 조인트 전체에 고른 변형을 유도하여 APJ의 변형집중의 단점을 해소할 수 있었다. 이에 새로 개발된 BFLJ는 APJ의 문제점을 극복하고 조기파손을 예방할수 있을 것이라 판단된다.