• Journal of Plant Biology
• /
• v.5 no.3
• /
• pp.1-4
• /
• 1962

A district (Sae-Bong) and 13 district (Sae-Jang Dong) grassland could be divided into four type of Community: Miscanthus-Community, Glyceria-Community, Festuca-Community, and Plantago-Community. Chose 17 or 20 stands from each district A and B and calculated F.I. with the Curtis method, finally vegetational continuum could be recognized while discontinuous boundary line of species distribution could not be recognized. As a rule the distributional curve of species was binominal or bell shaped. It had a distribution pattern peculiar to itself. As to the relationship of cattles' density and vegetation. I found that the tendency of F.I. moving from small to large paralleled that of disturbance-pressure from weak to strong. Found that the more the steepness of environmental factors be controlled by a rule " from large to small", the more F.I. might be controlled by a rule "from small to large" and that pH, soil-moisture-content, loss on ignition was in relation with the steepness. with the steepness.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.1
• /
• pp.9-22
• /
• 1975

As a second step of a thermal stress analysis in a watertight bulkhead plate during welding of a spool type penetration piece, is idealized as a thin circular disk with a clamped boundary. The exact solution for the transient temperature distribution and associated quasi-static thermal stresses which arise in a circular disk subjected to an instantaneous point source of heat acting in its interior has been obtained. And the solutions have been extended to the case of moving source of heat with the aid of the Duhamel's superposition integral and the results finally derived have been compared with the other results from the typical cases. The solutions can be applied to the problem such as a welding of a penetration piece on the watertight bulkhead and also applicable to the problems which occur in cutting or welding.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.48-51
• /
• 2010

본 논문에서는 자유경계문제 해석을 위해 정확도가 향상된 implicit 이동최소제곱 차분법을 제시한다. 계면경계에 대한 implicit 정의로 인해 비선형 시스템이 구성되고, 매 해석단계마다 절점해와 계면경계의 위치를 반복계산을 통해 찾는다. 계면경계 결정시 속도항을 한 단계 뒤로 지연시켜 explicit하게 근사적으로 계산하던 기존 방법에 비해 계면경계의 위치를 더 정확하게 계산할 수 있고, 결과적으로 해의 정확도가 향상되었다. 계면경계 위치값이 비교적 빠른 속도로 수렴하기 때문에 많은 반복계산이 필요치 않다. 수치예제를 통해 기존의 방법으로 계산한 결과와 비교하여 새롭게 개발한 implicit 방법의 향상된 정확도를 보였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.113-122
• /
• 2010

A two-dimensional thermal response and ablation analysis code for predicting charring material ablation and shape change on solid rocket nozzle is presented. For closing the problem of thermal analysis, Arrhenius' equation and Zvyagin's ablation model are used. The moving boundary problem are solved by remeshing-rezoning method. For simulation of complicated thermal protection systems, this method is integrated with a three-dimensional finite-element thermal and structure analysis code through continuity of temperature and heat flux.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1217-1226
• /
• 1988

This paper shows an deformation behavior of steel cast slabs, which is used to prevent internal cracks of a slab in an unbending zone, in case of hot charge rolling(HCR) and hot direct rolling(HDR). The value of moving strand shell bulging between two supporting rollers under ferrostatic pressure has been computed in terms of creep and elastic-plasticity and for high strand surface temperature and high casting speed V=1.4-2.2m/min. The strain and strain rate distributions in solidified shell undergoes a series of bulging are calculated with boundary condition a very closed to continuous steel cast slabs productions.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.1023-1033
• /
• 2012

An underwater planar covering problem is studied where the coverage region consists of polygonal cells, and line sweep motion is used for coverage. In many subsea applications, sidescan sonar has become a common tool, and the sidescan sonar data is meaningful only when the sonar is moving in a straight line. This work studies the optimal line sweep coverage where the sweep paths of the cells consist of straight lines and no turn is allowed inside the cell. An optimal line sweep coverage solution is presented when the line sweep path is parallel to an edge of the cell boundary. The total time to complete the coverage task is minimized. A unique contribution of this work is that the optimal sequence of cell visits is computed in addition to the optimal line sweep paths and the optimal cell decomposition.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.3
• /
• pp.349-357
• /
• 2010

In this paper, a numerical code for the interior ballistics has been investigated. The Eulerian-Lagrangian approach and the SMART scheme have been used in the numerical code for the grain combustion. The translational kinetic energy of the projectile and work done against barrel friction have been considered only. The ghost cell extrapolation method has been used for the chamber change with the projectile movement. The calculation results of the numerical code have been compared and verified through those of IBHVG2 code.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05a
• /
• pp.68-73
• /
• 2000

An arc model based on the N-S equations modified by adding an energy source term to take account of the arc is developed and solved using Taylor-Galerkin FEM. The numerical method is applied to the simulation of the interruption process of a puffer type GCB. Moving boundary conditions of the arc chamber during operation is taken into account. The thermal interruption capability of an actual puffer type GCB will be predicted and compared with that of the measured result.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.24-32
• /
• 1995

Tsunami generated by the 1992 Nicaragua's west coast earthquake caused 95 persons death, 155 persons injury and 3000 persons homelessness. The previous study done by Imamura et al. (1993) were on the 1992 Nicaragua tsumami generation and propagation which were simulated by using spherical far-field model and Cartesian near-field model, and the computed results with assumption of vertical wall at coast were adjusted by runup ratio to compare with observations. This study using moving boundary model hindcasts El Transito's runup height which was observed as about 6.4-9.9m.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.4 s.19
• /
• pp.1-8
• /
• 2005

In this study, a numerical model combined by a river model and an inland model developed to simulated a flood event. The river model describing an inundation in a river solves the two-dimensional Saint Venant equations with a finite difference method. The inland model based on the ILLUDAS describes the conveyance capacity of a storm sewer system. The combined model is applied to a real situation. The model simulates reasonably the real flood event occurred in a river and inland simultaneously.