• Journal of the Ergonomics Society of Korea
• /
• v.30 no.6
• /
• pp.689-694
• /
• 2011

Objective: The aim of this study is to evaluate the fluctuation of signal amplitude during repetitive dynamic contraction based on surface electromyography(EMG). Background: The most previous studies were considered isometric muscle contraction and they were difference to smoothing window length by moving average filter. In practical, the human movement is dynamic state. Dynamic EMG signal which indicated as the nonstationary pattern should be analyzed differently compared with the static EMG signal. Method: Ten male subjects participated in this experiment, and EMG signal was recorded by biceps brachii, anterior/posterior deltoid, and upper/lower trapezius muscles. The subject was performed to repetitive right horizontal lifting task during ten cycles. This study was considered three independent variables(muscle, amplitude processing technique, and smoothing window length) as the within-subject experimental design. This study was estimated muscular activation by means of the linear envelope technique(LE). The dependent variable was set coefficient of variation(CV) of LE for each cycle. Results: The ANOVA results showed that the main and interaction effects between the amplitude processing technique and smoothing window length were significant difference. The CV value of peak LE was higher than mean LE. According to increase the smoothing window length, this study shows that the CV trend of peak LE was decreased. However, the CV of mean LE was analyzed constant fluctuation trend regardless of the smoothing window length. Conclusion: Based on these results, we expected that using the mean LE and 300ms window length increased reproducibility and signal noise ratio during repetitive dynamic muscle contraction. Application: These results can be used to provide fundamental information for repetitive dynamic EMG signal processing.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.4
• /
• pp.217-223
• /
• 2013

This paper presents the wet damping estimation of the segmented hull model using the random decrement technique together with the continuous wavelet transform. The tested 16 sea states are grouped together based on the speed of the ship in order to figure out the possible influence of the ship speed on the damping ratio. The measured time histories of vertical bending moment for each tested sea state were processed with random decrement technique to derive the free decay signal, from which the damping ratios are estimated. Also, the autocorrelation functions of the filtered signal were calculated and comparison was made with the free decay signal obtained from the random decrement technique. Then the wet damping ratios for each sea state group, as well as precise wet natural frequencies, are estimated by using continuous wavelet transform. It turned out that the wet natural frequencies derived from the measured signal did not show any significant discrepancy compared with those obtained by wet hammering test, whereas the damping ratio did. It was considered that the discrepancy of the damping ratio between in calm and moving water may be attributed to the viscous effects caused by dramatically different flow pattern and relative velocity between the vibrating structure and surrounding fluid particles.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.190-200
• /
• 2014

The video-based system of the broadcasters and the video-related institutions have shifted from analogical to digital in worldwide. This migration process can generate a defect, digital dropout, in the quality of the contents. Moreover, there are limited researches focused on these kind of defects and those related have limitations. For that reason, we are proposing a new method for feature extraction emphasizing in the peculiar block pattern of digital dropout based on discrete cosine transform (DCT). For classification of error block, we utilize support vector machine (SVM) which can manage feature vectors efficiently. Further, the proposed method overcome the limitation of the previous one using continuity of frame by frame. It is using only the information of a single frame and works better even in the presence of fast moving objects, without the necessity of specific model or parameter estimation. Therefore, this approach is capable of detecting digital dropout only with minimal complexity.

• Journal of the Korean housing association
• /
• v.15 no.2
• /
• pp.27-34
• /
• 2004

The purpose of this study has two folds. For the local government it gives a guide to establish the housing information system, which provides various housing information in order to promote service to the public on Internet. It also gives a guide for the local government to collect the fundamental data from local housing market and provide them to the policy makers as well as the housing producers (landlords, builders and owner-occupiers). Contents of housing information system website for the local government consist of three main parts. The first part provides housing policy and local housing market information to the upper level local government as well as housing producers. The second part provides housing information for the people who are looking for houses to move the own. Final part provides the procedures of building construction and development plan for landlords to the public. In case of Pyongtaek-City, this study makes them by cluster analysis of houses and households moving pattern as the Internet contents. Housing markets of Pyongtaek-City divide 3 sectors by housing type, tenure type and housing supply ratio etc. And populations prefer to move intra sectors. According to this information, policy-makers should define local housing problems and find solutions and housing producers can supply the house just in sites and in time. In conclusion, local government should provide valuable housing information based on local housing market research to the public for the effective housing policy. As local housing market is formed by various factors it is needed for local government to research housing sub-markets due to apply these research results to the local government for the future.

• Archives of design research
• /
• v.15 no.3
• /
• pp.29-38
• /
• 2002

Recently, types of mobile services are ever-growing with technological advances, such as CDMA 2000, 256 Color LCD, 16 channel sound chip set and easy internet access. However, manual system that is supposed to support users for finding features and functions doesn't help users most of the cases since users are moving. Therefore, mobile sonics needs new concept for manual system that can support users while they are in use In this research report, new concept for interactive manual system is suggested. Then a guideline for interactive manual system is developed as a result from three empirical studies. First, ten information visualization methods used for describing functions are positioned on user's perception map. Secondly, user behavior pattern of getting required information from written manual was analyzed. Finally, visual cue system was selected as one of options for developing interactive manual system and a guideline was developed based on these research results.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.219-228
• /
• 2012

As the wireless Internet become more widely accessible, variety of Internet services can be used without limitation of location. However, existing mobility management methods such as MIP and PMIP of IETF requires the load of heavy protocol stack on the mobile nodes or the addition of components such as LMA and MAG. In this paper, we proposed the location management technique in the PMIPv6 and Fast Handover technique. according to the moving pattern of the node, the location management technique proposed in order to adjust the paging area dynamically. The Fast Handover technique applied MIH technology and it reduced the handover signal processing time between heterogeneous network. The location management cost in the environment which the node moves in order to evaluate this and handover delay time was calculate. The proposal technique was efficiently more evaluated than PMIPv6 with the smallest 29% and maximum 83%.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.59-66
• /
• 2002

The rapid change of industrial structure causes to increase distribution cost and requires necessity of physical distribution system urgently. Traffic situation is getting extremely worse and traffic jam has led to increasing expense of physical distribution delivery which dominates 20% of distribution cost. In this situation, the shortest and most suitable path search system is required by modern people who must waste a lot of time for moving with a car or on the street as well as many companies. for these reasons, we developed the shortest-path-searching system applying the dijkstra algorithm which is one of the effective shortest path algorithm to GIS, and it was constructed by considering realistic urban traffic and the pattern of street in a physical situation. Also, this system was developed to be updated weight data automatically, considering the dynamic change of traffic situation such as a traffic information service which will be served in real time. Finally, we designed this system to serve on web by using MapObjects IMS.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.235-242
• /
• 2005

As the demands in a wireless network are recently increasing, it is necessary to promote the power efficiency of a wireless terminal, and to reduce the overhead of a network. To resolve such problems, we propose the paging technology and the structure of paging area with the joint access point in HPi (High-speed Portable Internet) network, which is being studied as the domestic next-generation IP packet data network. The application of the paging technology to the HPi network possesses the advantage of reducing the registration cost while a terminal in dormant state moves around, and the reporting cost of the terminal's location by the joint access point. The technology suggested in this paper causes the advantages that it promotes the power efficiency in user's point of view while it reduces the network overhead and makes the easy rearrangement of joint APs according to the changes of users' moving pattern in the network manager's point of view.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.372-375
• /
• 2008

IEEE 802.11e standardized the EDCA mechanism to support the priority based QoS. And the virtual collision handler schedules the transmission time of each MAC frame using the internal back-off window according to the access category(AC). This can provides the differentiated QoS to real-time services at the medium traffic load condition. However, the transmission delay of MAC frame for real-time services may be increased as the traffic load of best effort service increases. It becomes more critical when the real-time service uses a compressed mode video codec such as moving picture experts group(MPEG) 4 codec. That is because each frame has the different importance. That is, the I-frame has more information as compared with the P- and the B-frame. In this paper, we proposed a buffer management algorithm based on the frame importance and the delay bound. The proposed algorithm is consisted of the traffic regulator based on the dual token bucket algorithm and the active queue management algorithm. The traffic regulator reduces the transmission rate of lower AC until that the virtual collision handler can transmit an I-frame. And the active queue management discards frame based on the importance of each frame and the delay bound of head of line(HoL) frame when the channel resource is insufficient.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1925-1936
• /
• 2010

In this paper, multi-legged robot was designed and produced using stable walking pattern algorithm. The robot had embedded camera and wireless communication function and it is possible to recognize both hand posture and obstacles. The algorithm decided moving paths, and recognized and avoided obstacles through Hough Transform using Edge Detection of inputed image from image sensor. The robot can be controlled by hand posture using Mahalanobis Distance and average value of skin's color pixel, which is previously learned in order to decide the destination. The developed system has shown obstacle detection rate of 96% and hand posture recognition rate of 94%.