• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.18-25
• /
• 2011

In a manufacturing process of metal coins, surface defects of coins are manually detected. This paper describes an new method for detecting surface defects of metal coins on a moving conveyor belt using image processing. This method consists of multiple procedures: segmentation of a coin from the background, alignment of the coin to the model, projection of the aligned coin to the best eigen image space, and detection of defects by comparison of the projection error with an adaptive threshold. In these procedures, the alignement and the projection are newly developed in this paper for the detection of coin surface defects. For alignment, we use the histogram of the segmented coin, which converts two-dimensional image alignment to one-dimensional alignment. The projection reduces the intensity variation of the coin image caused by illumination and coin rotation change. For projection, we build multiple eigen image spaces and choose the best eigen space using estimated coin direction. Since each eigen space consists of a small number of eigen image vectors, we can implement the projection in real- time.

• Ocean and Polar Research
• /
• v.28 no.3
• /
• pp.293-303
• /
• 2006

The topography of the sea floor and textural characteristics of surface sediments are documented in areas off sectors 1,2, and 4 of the Saemangeum dyke and inside the dyke. These were investigated during the years 2002 to 2005, when the dyke construction almost came to an end, and were compared with natural topographic analogs before the dyke construction from the maritime maps of 1982 and 1994. Along and across the dyke are a number of erosional troughs formed by intensified currents during the dyke construction. The sea floor off sector 4 has undergone gradual accumulation of sands moving from the north by currents varying in direction from normal to parallel to the dyke. This is in a strong contrast with a slight erosional environment prevailing over the sea floor before dyke construction. off sectors 1 and 2, a topography with an alterative pattern of erosional troughs and sand shoals develops normal to the dyke. Eroded materials from the troughs seem to have added to the sand shoals. As a result, the troughs, former natural tidal channels, have become increasingly deeper, whereas the sand shoals have become somewhat shallower. The sea floor inside the dyke has also been remarkably shallower with expanding tidal flats due to trapping by the dyke of continuous sediment input from the Dongjin and Mangyeong rivers. Sands, all of which are considered to have originated originally from the two rivers, dominate the entire Saemangeum area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.4
• /
• pp.420-431
• /
• 2010

The water-soluble components have been analyzed from the total suspended particulate (TSP) collected at Gosan site of Jeju Island for ten years (1997~2006), and the long-term variations of ionic constituent concentrations have been investigated in order to understand the pollution characteristics of atmospheric aerosols. Their mean concentrations were in the order of nss-${SO_4}^{2-}$ > $Na^+$ > ${NO_3}^-$ > $Cl^$ > ${NH_4}^+$ > nss-$Ca^{2+}$ > $K^+$ > $Mg^{2+}$. The ${NO_3}^-$ concentrations had increased somewhat smoothly compared to those of ${SO_4}^{2-}$ for the past 10 years, possibly indicating the recent energy consumption pattern changes in China. The concentrations of ionic aerosol components showed mostly higher values during the Asian Dust storm periods, and the concentration ratios of nss-$Ca^{2+}$, ${NO_3}^-$, and nss-${SO_4}^{2-}$ between the Asian Dust and Non-Asian Dust periods were 6.9, 2.4, and 1.3, respectively. The anthropogenic nss-${SO_4}^{2-}$, ${NO_3}^-$, ${NH_4}^+$ and the soil originated nss-$Ca^{2+}$ components showed high concentrations as the air parcels were moved from the Asia continent, on the other hand, their concentrations were relatively low as moving from the Northern Pacific into the Gosan area.

• Journal of Fashion Business
• /
• v.16 no.4
• /
• pp.29-45
• /
• 2012

The purpose of this study is for providing not only the latest design technique trend for zero waste fashion, but information about creative fashion design education through eco-fashion industry trend in globally and domestic which is focusing on eco-fashion labelling. The research were processed with literature related eco, sustainable, green fashion books, former articles, newspapers, and web sites. The results as follows; The certification about eco-fashion product is moving to 'Life Cycle Assessment' from focused on primary process like material, finishing, dyeing. Especially simplicity of process means reducing the wastes. And fabric wastage for adult outwear was estimated 15% percent of total fabric used in general design studios. Three cases for Zero waste fashion were as follows; First, Jigsaw puzzle by Timo Rissane and Mark Liu were different zero waste methods, but the result was same. Rissene's method was based on traditional cutting like 'cut and sew' but traditional cutting can lead to design that have an abundance of fabric and drape. Jigsaw of Rissene was approached with description a pattern-cutting technique in which all piece interlock with each other generating no waste from design production. Another Jigsaw by Liu was related with innovative textile design. DTP makes the possibilities for zero waste garment production almost endless. The dress intricately cut from 10 pieces, wastes none of the fabric required to make it. Second, Subtraction Cutting by Julian Roberts provides unexpected fluid, organic forms and zero waste fabric. Utilizing Roberts plug(tunnel) technique enables any part of the garment that is removed for fit or aesthetics to be reincorporated into the design of garment. Third was 'Bio Couture' by Suzanne Lee. She has created garments from cellulose bacteria which grow in a bathtub using only green methods addressing in such as way ecological issues and exploring the future of fashion design in conjunction with technology.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.19-24
• /
• 2015

PURPOSES : The noise, which is typically generated by fast moving vehicles, can be intercepted by installing a noise barrier with a soundproof panel. However, reflections from the panels cause secondary noise, and hence lower the effectiveness of the panels. In this study, the reduction of reflection noise by considering the shape, especially zigzag one, of the soundproof panel have been evaluated. METHODS : The simulation model used in this study was Nord2000, which simulates real-road situations effectively. Based on the simulation results, the joining angle of $133^{\circ}$ with the pattern width (a) equal to 2 m and the projection height (b) equal to 0.5 m was adapted in the zigzag shape as the best profit designing factors. RESULTS: The measuring results at middle height, 15 m showed reduction at all points except the point with average -1.6 dB. At a greater height of 30 m, 2 points showed reduction. A real-sized facility was constructed to investigate the reflected sound from a zigzag shaped panel up to the height of 5 m. CONCLUSIONS: The reduction effects were detected in all the receive points in the range of 2-6 m distances and 1-5 m heights comparing the plane panel. Compared to plane panel, the noises are reduced at an average of 2.4 dBA.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.135-143
• /
• 2020

Natural drought is a three-dimensional phenomenon that simultaneously evolves in time and space. To evaluate the link between meteorological and hydrological droughts, we defined a drought event from a three-dimensional perspective and analyzed the propagation characteristics in time and spaces. Overall results indicated that 77 % of the total cases of spatio-temporal droughts was propagated based on the single category relationship between meteorological and hydrological drought events, while 23 % was affected by multiple meteorological drought events to the occurrence of hydrological drougts. Especially, it turned out that the hydrological drought was caused by the spatio-temporal effects of the propagation of four meteorological drought events generated due to long-term lack of precipitation in 1994-1995. In addition, the meteorological drought caused by the lack of precipitation in the summer of 2001 lasted for several months, and was propagated to the hydrological drought in April 2002.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.2-9
• /
• 2002

Recently. VR( Virtual Reality) applications such as virtual studio and virtual character are wifely used In TV programs. and AR( Augmented Reality) applications are also belong taken an interest increasingly. This paper introduces a virtual screen system. which Is a new AR application for broadcasting. The virtual screen system is a real-time video augmentation system by tracking a chroma-patterned moving panel. We haute recently developed a virtual screen system.'K-vision'. Our system enables the user to hold and morse a simple panel on which live video, pictures of 3D graphics images can appear. All the Images seen on the panel change In the correct perspective, according to movements of the camera and the user holding the panel, in real-time. For the purpose of tracking janet. we use some computer vision techniques such as blob analysis and feature tracking. K-vision can work well with any type of camera. requiring no special add-ons. And no need for sensor attachments to the panel. no calibration procedures required. We are using K-vision in some TV programs such as election. documentary and entertainment.

• Nuclear Engineering and Technology
• /
• v.32 no.2
• /
• pp.128-141
• /
• 2000

The critical heat flux (CHF）experiments have been carried out in a wide range of pressures for an internally heated vertical annulus. The experimental conditions covered ranges of pressures from 0.57 to 15.01 MPa, mass fluxes of 0 kg/$m^2$s and from 200 to 650 kg/$m^2$s, and inlet subcoolings from 85 to 413 kJ/kg. The characteristics of the present data and the effect of pressure on CHF are discussed. Most of the CHFs were identified to dryout of the liquid film in the annular or annular-mist flow. For the mass flux of 200 kg/$m^2$s, there were the indications that the CHF occurred at the transition from annular to annular-mist How in the pressure range of 3~10 MPa. For the mass fluxes of 550 and 650 kg/$m^2$s, the CHFs had a maximum value at a pressure of 2~3 MPa, and the pressure at the maximum CHF values had a trend moving toward the pressure at the peak value of pool boiling CHF as the mass flux decreased. The CHF data under a zero mass flux condition indicate that both the effects of pressure and inlet subcooling on the CHF were smaller, compared with those on the CHF with net water upward flow.

• Design & Manufacturing
• /
• v.14 no.3
• /
• pp.44-49
• /
• 2020

One of display trends today is development of high pixel density. To get high PPI, a small size of pixel must be developed. RGB pixel is arranged by evaporation process which determines pixel size. Normally, a fine metal mask (FMM; Invar alloy) has been used for evaporation process and it has advantages such as good strength, and low thermal expansion coefficient at low temperature. A FMM has been manufactured by chemical etching which has limitation to controlling the pattern shape and size. One of alternative method for patterning FMM is laser micromachining. Femtosecond laser is normally considered to improve those disadvantages for laser micromachining process due to such short pulse duration. In this paper, a femtosecond laser drilling for thickness of 16 ㎛ FMM is examined. Additionally, we introduce experimental results for controlling taper angle of hole by vibration module adapted in laser system. We used Ti:Sapphire based femtosecond laser with attenuating optics, co-axial illumination, vision system, 3-axis linear stage and vibration module. By controlling vibration amplitude, entrance and exit diameters are controllable. Using vibrating objective lens, we can control taper angle when femtosecond laser hole drilling by moving focusing point. The larger amplitude of vibration we control, the smaller taper angle will be carried out.

• Journal of Korean Society of Forest Science
• /
• v.72 no.1
• /
• pp.16-26
• /
• 1986

Allozyme study on a small pitch pine stand originating and expanded rather rapidly from a few founder trees indicated that the colonization of the pitch pine population was made progressively from the place where the founder trees located to another by moving in cohorts of seeds from a limited number of family or genetically closely related family groups in line with the succeeding generations. This pattern of migration and colonization resulted marked differences in allelic and genotypic frequencies at many of the allozyme loci between the initially colonized subpopulation on the south-facing slope and the lately colonized subpopulation on north-facing slope of a hill. It appeared that gene fixation due to inbreeding and genetic drift occurred at some loci in the pitch pine population or subpopulations. However, even in t 1e inbreeding small pitch pine population or subpopulations, a comparatively large amount of genetic diversity or heterozygosity was maintained due to the high levels of gene recombination at many of the gene loci and natural selections favoring for heterozygotes.