• Journal of the Korean housing association
• /
• v.16 no.6
• /
• pp.139-147
• /
• 2005

The purpose of this study was to determine the factors which affect older people's innovativeness toward technologies and factors which affect their demand of home automation system. The study collected data from 289 persons who are 50 years and older with experience living in an apartment currently or past. Innovativeness toward technologies of respondents were low level and the significant factors which affected their innovativeness were age, education, employment, marital status, current housing types, health status of self and spouse, consideration of home automation system for a newly-moved house. Education, employment types, consideration of home automation system for a newly-moved house, and plan for moving were the major factors which affect demand of home automation system. Also, older people's innovativeness toward technologies was the most important factor which affected demand of home automation system. Th results of this study explained that high technologies which are adopted in residential environment should be considered target consumers' abilities and attitudes for acceptance toward new ideas. Especially, for older consumers, various ideas to expand their understanding of new technologies should be developed and the positive effect of technologies to increase the quality of their later life should be educated.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.147-151
• /
• 2002

Cross flow fan system is widely used for various applications, especially for the air-moving device of heaters, air-conditioners, and air-curtains. Although there are efforts for the optimization of cross-flow fan flow path with different methods of approach, it is still being investigated by many researchers through experimentally and/or theoretically, because the flow pattern of the cross flow fan is not stereotyped. This paper presents some results from numerical experiments for the optimization of the flow path through a cross-flow fan to be applied to indoor wall-mounted room heater. Two dimensional analysis has been applied to a specific fan system including inlet and diffuser outlet. Flow characteristics art presented and discussed for two different flow path at three different operating conditions represented by rotational speed(800, 1,000, 1,200 rpm) of the In. According to the simulated results for the specific fan system under consideration, it could be found that the flow pattern resembles each other at different rotational speed (to say from 800 rpm to 1,200 rpm) for a fixed flow path, while the secondary flows mostly absorbs the speed effects. By changing the flow path significant increase in volume flow rate is estimated upto 2.65 at the same rotational speed. According to the present experience, fan flow path design can be performed more efficiently by incorporating this type of numerical experiments combined with the model tests.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.75-80
• /
• 2002

The purpose of this study is to conduct researches on the aspects of reconstruction and remodeling of low-rise, dilapidated apartment buildings in the provinces, using comparative methodologies, consequently coming up with the findings in the following. 1) Unlike the rebuilding projects in which the movement process tends to be made in a bulk (in a simultaneous manner), it turns out that when it comes to remodeling, it would be advisable to attempt moving the inhabitants as a group either by the size of their residence or by the building. 2) Given the peculiarities of the construction management mechanism, remodeling projects might seem disadvantageous on the part of the management on account of inadequate accumulation of information and experience. Hence, based on the impeccable assessment of the current status of the subject buildings from the phase of planning, its imperative to closely look into and take into consideration a variety of direct and/or indirect factors in advance of the implementation. 3) A series of comparative researches from the perspective of economical efficiency that remodeling projects appear profitable considering the overall costs including financial expenses, varied taxes, and so on that will be eventually brought forth during the reconstruction period, and all the more so when allowing for the consequential effects which they ought to have upon the natural and human resources, environmental and ecological condition, business potentials, etc. Amelioration to be desired on the basis of the findings above.

• Journal of KSNVE
• /
• v.4 no.1
• /
• pp.33-42
• /
• 1994

When a vibration is generated due to the misalignment, the reduction of the vibration level is not attainable unless a correct shaft alignment is conducted. In a turbine system, an alignment procedure requires quite a lot amount of expense and time. To reduce this effort, an algorithm of the turbine alignment is developed to be used in the computer program. The program consists of five parts : input, calculation, display of the results, file management, and printer output. In the input part, users must provide the data on the turbine number, the reference value of the alignment, and the number of the feet of the generator. In calculation, the moving distance of the bearing and the necessary amount of the shims are calculated. In the display and the output parts, the calculated results are displayed and calculated. In the display and the output parts, the calculated results are displayed and printed. Then, by using the file management, results and procedures conducted are saved in the floppy diskette or in the hard disk. The developed program can be run in IBM PC compatible with more than 640 KB of main memory with the operating system of MS-DOS v 3.3 or higher. It is developed for novice users with no experience or specialty in this field. The program is not only useful in the power plant application, but also helpful for recording of the alignment procedures.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.10
• /
• pp.1043-1049
• /
• 2012

The FEM analysis of machine tools is the general analysis process to evaluate machine performance in the industry for a long time. Despite advances in FEM software, because of difficult simplicity of CAD drawing, little experience of joints stiffness modeling and troublesome manual contact area divide for bindings, the industry designers think the FEM analysis is still an area of FEM analysis expert. In this paper, the automation of modeling process with simplicity of drawing, modeling of joints and contact area divide is aimed at easy FEM analysis to enlarge utilization of a virtual machine tools. In order to verify the effects of modeling automation, a slant bed type model with tilting table is analyzed. The results show FEM modeling automation method only needed 45 minutes to complete the whole modeling process, while manual modeling method requires almost one month with 8200 calculations for coordinate transformations and stiffness data input.

• Journal of the Korean Institute of Rural Architecture
• /
• v.11 no.4
• /
• pp.43-50
• /
• 2009

Since then where the public housing comes in into Korea many there was development and change. The Mapo apartment in Seoul which is built at 1962 is the first apartment and case of Jeollabuk-do before being built at 1978, the Dongyang apartment Jeongju is the beginning. Before the residential supply ratio which gives already passes over 100% and of 80% or more of the house which is supplied is composed with the public housing. Therefore the expansion which is quantitative increased enough and also the degree of satisfaction improved about the people who lives in the house. From the research which sees consequently currently in the object satisfaction under investigating boil the specialists who from the small and medium-sized town and city have a many experience from construction field about the house. The result in future there is the goal provides the fundamental data which the quality of the house presents the direction which will advance about the public housing with base and improves.

• Korean Journal of Veterinary Service
• /
• v.32 no.3
• /
• pp.287-292
• /
• 2009

This study was conducted to analyse risk factors which can influence on blood splash in slaughtered cattle in D slaughterhouse located in Gyeonggi province in 2008. A total of 13,056 cattle were studied by several risk factors such as species, gender, body weight, meat grade, weather (temperature), transport distance, lairaging time, moving time, mixing cattle from different sources. As the result of analysis, the total mean of blood splash was 0.70% and the rate was highest (0.94%) in castrated Hanwoo. The heavier body weight, the higher blood splash rate. The farms which have had more than one experience of blood splash tend to have high grade in meat quality. As a weather factor, the rate in summer season was lower than in winter season. It increased as transport distance getting longer and decreased when the lairaging time was 2~5 hours. We could know many risk factors strongly related with the occurrence of blood splash from this study.

• Journal of the Korean housing association
• /
• v.26 no.6
• /
• pp.83-92
• /
• 2015

The purpose of this study is to analyze the characteristics of exterior spaces used by the elderly of housing complex. The exterior spaces are used for going out in everyday life with the view point that the elderly have to go out from the inside home in order to prevent isolating the elderly from local community. For that Toyoshikidai housing complex in Kashiwa city of Chiba prefecture, Japan is selected and carried out questionnaire survey and field survey targeting residents. The results are following as. For spatial characteristics, the location installed benches, location occupied in one part by roof, wall, or plants, place connecting to moving flow of the aged, and an open expanse getting safety from vehicle are taken advantages for the elderly. For using benches, the elderly of 70.1% do not have experience using benches installed in all those places. The the biggest reason is that they are not tired. However, 36.8% of the elderly are using benches in order to take a rest and 20.8% of them are using benches in order to talk with the other people. Bench is ibasho of the elderly.

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.193-199
• /
• 2007

인터넷 쇼핑이 점차 대중화되어가면서 다양한 형태의 인터넷 쇼핑몰이 등장하고 있다. 현재 인터넷 쇼핑몰에 사용되는 상품이미지는 움직임이 없는 정적인 JPEG 이미지부터 빠르게 움직이는 동적인 GIF 이미지까지 다양한 형태를 이루고 있다. 이러한 상품이미지의 움직임 속도에 따라 사용자가 인지하는 쇼핑몰 사이트의 가격대와 상품의 가격대가 다를 것으로 예상했으며 사이트의 상품이미지의 지배적인 움직임 속도가 오프라인 상점을 연상하는데 영향을 미칠 것으로 추측하였다. 실험은 같은 상품 이미지를 동적인 움직임 정도에 따라 세 가지로 분류하여 사용자로 하여금 예상되는 쇼핑몰의 가격대를 매기도록 하였고, 어떤 오프라인 상점을 연상하는지 조사한 결과 사용자들은 정적인 상품 이미지를 사용하는 쇼핑몰 페이지를 고가의 인터넷 쇼핑몰로, 동적인 상품이미지를 사용하는 쇼핑몰 페이지를 저가의 인터넷 쇼핑몰로 인식하였다. 또한 상품 이미지의 움직임과 오프라인 상점의 가격대별 연상이 어느 정도 상관관계가 있는 것으로 밝혀졌다. 이 연구를 통해 동적인 상품이미지와 정적인 상품이미지가 쇼핑몰의 가격대인지 형성에 미치는 역할을 알아보고 가격 관련 사용자 경험에 시사하는 바를 살펴보았다.

• Journal of Korean Critical Care Nursing
• /
• v.8 no.1
• /
• pp.11-24
• /
• 2015

Purpose: The purpose of this study was to explore the experience of patients on the waiting list for kidney retransplantation. Methods: The data were collected by individual in-depth interviews of nine patients who were dialyzed after primary kidney graft dysfunction and were waiting for deceased donor kidney retransplantation. All interviews were audio-taped and transcribed, and were analyzed using a phenomenological method. Results: The findings included 5 theme clusters and 13 sub-themes. The 5 clusters were 'Diagnosed with chronic renal failure and dialysis: Broken daily life and crisis', 'Kidney transplantation: The only way to escape from dialysis', 'Kidney graft failure: Inevitable moving backward to hemodialysis', 'Self-management of re-dialysis patients: Growth through pain', and 'The waiting for kidney retransplantation: To try again in the hope of getting a new life'. Conclusion: This study provides a deep understanding of patients with dialysis who are waiting for deceased donor kidney retransplantation. On the basis of the findings of this study, health professionals can provide customized information and develop effective nursing interventions to improve the self-management of these patients.