• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.1
• /
• pp.49-55
• /
• 2002

For making a lead terminal(condenser, resistor etc.), it is the matter that lead wire have to be supplied smooth without twisting and curving when it is supplied to the further processing (cutting, forming, attach process) after it being forwarded. The purpose of this study is to solve the winding claims of lead wire through the structural expansion of winding equipment to which the improvement of packing equipment to forward safely and supply the lead wire and QFD method are applied. The results of this study is available to solve the technical problem caused by the installation of the existing flyer system for the prevention of twisting and can expect the quality assurance as it prevents the claim(surface fault) caused by the bumping among lead wire which are involved in the packing equipment in its moving stage.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2626-2627
• /
• 1999

The device we have developed is the automatic shut off equipment which will reduce energy consumption when an equipment is in stand by power state. The principle for this system is when a man is moving, electricity will flow by setting a on-off light system. At night, in the stand-by power state the electric supply will be shut off immediately which will reduce energy consumption. Energy consumed by 24hour operating machines and stand-by electronic devices will be reduced by pulse signals which will give power supply when needed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1913-1917
• /
• 2000

SMD Equipment convey an electronic parts at high speed, then assemble parts into a circuit board, and it develop a long time-duration dynamic force to be caused by moving mass. Vibration problem to be caused by SMD Equipment have an effect on micro-meter level's precision production process, directly, and dynamic stability of building. In the cause of quantitatively access about its vibration problem, input information(or data) of structure dynamic analysis need accuracy information of dynamic load. Determination of Dynamic load is various kinds of method using experimental and theory. In this paper, we got dynamic load using direct measurement method. We expect that an study on the dynamic load characteristic of SMD can be used to Equipment development of low level vibration and basis information of structure dynamic analysis.

• Journal of Biosystems Engineering
• /
• v.16 no.3
• /
• pp.290-297
• /
• 1991

For the efficient utilization of the solar thermal energy to overcome the time gap between to supply and demand, an efficient heat storage technique, especially high density-latent-heat storage system, is necessary. In this study, the performance of a panel type latent heat storage equipment during heat discharging process was analyzed theoretically and experimentally. In order to find out the performance of the system, computer simulation programs were developed by finite difference method. The governing equations were constructed by two dimensional heat conduction model with moving boundary. The results of the experimental and the theoretical analysis were reasonably well agreed. The efficiencies of the double pipe type and the panel type latent heat storage equipment were compared.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.287-292
• /
• 2005

Safety of Station electric equipment is not analysed yet. this paper try the safety first times on the basis of hazards which railway stations contain. The stations use many electric equipment such as lights, escalator and elevator for facilitating for passengers and public moving, HVAC system making good environment and so on. The electric equipments could be changed to harmful systems to passengers and publics resulting from abnormal operation condition. To ensure safeties in the station, we need to identify and analyse the hazards in the station and to provide risk mitigation methods. In this paper, we shows processes and methods to ensure the safety, how to identify and analyse the hazards. Finally, we demonstrate how to mitigate the potential risks in the stations.

• Journal of the Korean housing association
• /
• v.7 no.1
• /
• pp.63-74
• /
• 1996

This research employs the equipment and the expenditure of the combination and the nurseing types of the elderly home in Tokyo, Japan due to its similarity to Seoul, Korea. This study is to investigate the solutions of the consumer's and manager's problem related to homes for the elderly. All research used in the analysis conducted in september 1995 by visiting, intervieing and questionaire with special focuses on the private room and public space etc. And also, the expenditure was investigated separately for the rent, utility paid by the tenants fer month, deposit, and refunds price to the moving. The result of this study is that the researcher could propose to the managers, planners and tenents of the conbination and nurseing types of the Elderly Home about needed equipment, the expenditure, the point of planning etc.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.8-14
• /
• 2020

Intelligent devices using ICT technology have been introduced in the field of construction machinery to improve productivity and stability. Among the intelligent devices, Machine Guidance is a device that provides real-time posture, location, and work range to drivers by installing various sensors, controllers, and satellite navigation systems on construction machines. Conversely, the efficiency of equipment that requires location information, such as machine guidance, will be greatly reduced in buildings, and tunnels in the GPS blind spots. Thus, the other high-precision positioning technologies are required in the GPS blind spot zone. In this study, we will develop a relative position measurement system that provides precise location information such as construction machinery and robots in a local area where the GPS reception is difficult. A relative position measurement system tracks a marker in the form of a sphere installed on a vehicle by using the image base tracking technology, and measures the distance and direction information to the marker to calculate a position.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.304-309
• /
• 2015

On construction sites, it is important to monitor the performance of construction equipment and workers to achieve successful construction project management; especially, vision-based detection methods have advantages for the real-time site data collection for safety and productivity analyses. Although many researchers developed vision-based detection methods with acceptable performance, there are still limitations to be addressed: 1) sensitiveness to the shape and appearance changes of moving objects in difference working postures, and 2) high computation time. To deal with the limitations, this paper proposes a detection algorithm of construction equipment based on Integral Channel Features. For validation, 16,850 frames of video streams were recorded and analyzed. The results showed that the proposed method worked in high performance in terms of accuracy and processing time. In conclusion, the developed method can help to understand useful site information including working pattern, working time and input manpower analyses.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.450-454
• /
• 1997

This system is the automatic boiler tube bending equipment which has four heads for bending the tube and the carriage for moving the tube. The system consists of two frames for transporting each moving parts, high-frequency heating equipment for heating the tube in hot bending, control panel for inputting the job data operating, remote control unit for concetration and distribution of input/output, and the monitoring system which can establish unmanned operationby receiving the bending job data via LAN form a design teamwhich produces the job data and schedule based on master production plan and diagnoses bending data change, input, whole system status, and system malfunctions. By employing this system, 30% of production improvement was achieved was achieved comparing to the existing bending system.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1574-1585
• /
• 2007

In the more and more continues traffic difficulty which comes to be serious it is for solve, in order to like this used plan for new town light train automatic fare collection system, the city development which is balance and the passenger whom it uses, in consequence of the fact that recently believer instruction, the automatic fare collection system the reverse which is convenient is used in the scripture season which is embossed with means it introduces it operates and a manpower with the scientific service control which leads the electric computer anger of passenger service improvement and accounting and statistical business it reduces, the use is convenient and the possibility facility of operating efficiently in rational plan in order to be, description below for the service automation equipment where the efficiency improves it is. Service automation equipment uses a scripture season to be the first boundary gate of the passenger, there must be a place where it uses a service automation facility and in order to be convenient, it considers the moving area and a wait of the reverse station passenger moving area and the space where, must secure the automatic fare collection system which it follows in automation of facility and the service operation of the reverse station which is ticket sale, the collection of tickets back the passenger is convenient and in order it will be able to use, must do and must consider, must arrange the efficient characteristic of the maintenance civil official services.