• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2726-2730
• /
• 2011

This paper proposes a CBTC wayside signaling system, which redeems existing track-circuit-based ones by using movement authorities mixed with logical block and moving block. Only one train can be entered into the logical block or the route for existing wayside signaling system. Applying moving block for CBTC system enables the train to get nearer to the preceding one, because its protection mechanism uses train's safe boundary, not fixed block unit. By narrowing the existing route set to switch machine and applying the moving block beyond that area, more than one train can enter into one route area. This paper shows that the efficient train control, i.e. shortening the headway, is possible using the moving block mixed with logical block in wayside signaling system.

• 한국시뮬레이션학회논문지
• /
• 제6권2호
• /
• pp.59-69
• /
• 1997

This paper proposes a simulation method of train control system to increase railroad transportation capacity in the Seoul Subway. Comparing with the conventional fixed block system, a new train operation method of "moving block system" shows a more capability of same railroad. A graphic simulation program is developed for application of moving block system to Seoul subway train control system. The result of the simulation program shows a shorten headway i.e. a more dense operation of trains and a higher efficiency of railroad with the suggested moving block system.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권8호
• /
• pp.397-404
• /
• 2003

In part I, we studied only step speed control for train, the second part extended to beacon signaling system and moving block system. With the calculated braking distance in part I, part II showed how to reduce headway using the beacon signaling system and moving block system, revealed that the beacon system has a braking distance advantage for sighting allowance with compared to step speed control, proposed beacon installation interval and revealed the braking distance with moving block system being nearly approached to train pure braking distance. We compared three different train control system to decide the best signaling system for a given condition and obtained the result that three systems have a same headway near 10～13 steps speed control.

• 대한토목학회논문집
• /
• 제26권5D호
• /
• pp.723-730
• /
• 2006

본 연구는 지하철의 표정속도 향상을 통해 승객의 총통행시간을 절감시키고자 수행하였다. 본 연구가 갖는 기존연구와 차별성은 열차의 신호시스템측면을 고려하여 승객의 통행시간변화를 분석했기 때문에 기존의 운영계획측면에서 임의로 운전시격을 변화시켜 분석한 열차의 승객통행시간 절감효과보다 신뢰성과 현실성을 높일 수 있다. 본 연구의 주요내용은 열차운행의 신호시스템측면에서 기존의 고정폐색방식보다 우수한 이동폐색방식을 적용하여 사례노선의 최소운전시격을 산정(시뮬레이션)한 후, 이를 단독 또는 Skip-stop방식과 혼용하여 승객통행시간 절감효과를 분석 제시하였다. 본 연구의 분석결과, 이동폐색방식은 고정폐색방식보다 총통행시간과 표정속도에서 각각 24.4%, 32.3% 향상 효과가 나타났으며, 이를 Skip-stop방식 중 격역정차방식과 혼용하여 적용할 경우, 총통행시간은38.1~52.5%, 표정속도는 최대 58.1%까지 향상되는 시너지 효과가 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1495-1500
• /
• 2006

A signal system is critical point of transport capacity and train operation in urban rail transit. Today the moving block system by radio is taking place of the fixed block system by track circuit for efficiency and short headway in underground railway and right rail transit. In this study, assuming specification of a train, track and control system, the minimum headway on the moving block system and the fixed block system is researched for the maximum transport capacity.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권1호
• /
• pp.8-15
• /
• 2004

In order to scheme the optimal assumption that satisfies the travel demand, it should be review the elements that affect on determining the headway, which are signal systems, line shape, vehicle(Light Rail Transit) performance, and so on. When applying the conventional signal systems, including Fixed Block System and Moving Block System, It was confirmed whether or not satisfy the requirements of target line with the way of a numerical formula reviewing and Train performance Simulation on the main line, station, depot, and so forth. Therefore, it should be used as references that decide target line and each sub-system after identifying the compliances for Minimum Headway to Moving Block System.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권1호
• /
• pp.9-16
• /
• 2005

Accurate and reliable tracking of train is essential for the train control system. The fixed block system which utilizes track circuit has been used widely for the detection of train position. As an alternative, the moving block system has the advantage over the fixed block system since it enables shorter headway and easier maintenance. This paper presents a new technique for the train tracking system which uses radio signal for the train position detection. The proposed algorithm uses the phase difference of arrival of radio signal for the detection of train position. Experimental verification of the algorithm is presented in the paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.574-580
• /
• 2003

This research heightens use efficiency of existent train railroad equipment by maximum through communication based train control system, and because system that take advantage of new skill compares with safety of old signal system same or it that show that is high be. Examined MBS Embodiment method of most suitable by presenting calculation that find out location of train that this treatise runs free curved line department to embody MBS(Moving Block System) through communication

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.421-422
• /
• 2006

Using the still image through the camera reports which the moving object tracking system. Moving object direction detected to compare the two difference images. And base block set at moving object. Matching area set current difference image. The edge image of prior frame and current frame implement the moving object tracking system to block matching.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1092-1099
• /
• 2011

This paper is concerned with the ATO speed profile generation method in the moving block system. The ATO speed profile is calculated using the acceleration limit and the jerk limit to improve ride comfort. In addition, the speed limit and stop distance provided from ATP profile should be considered to ensure safety. In the moving block system, the speed limit and the stop position are frequently changed in real-time. Therefore, the ATO speed profile should be regenerated immediately according to change of the speed limit and the stop position, within the acceleration limit and the jerk limit. In this paper, the ATO speed profile generation method is proposed, which considers not only frequent changes of the speed limit and the stop position but also acceleration limit and jerk limit. Futhermore the simulation result is presented to verify usefulness of this method.