• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.2
• /
• pp.127-131
• /
• 2004

A low-cost, simple strip reader system using a linear movement mechanism of CD-ROM deck has been developed to characterize a lateral flow membrane-based immunochromatographic assay. The test strip reader was assembled by a CD-ROM deck and home-made optical head especially designed for immunoassays. The optical head for detecting reflected light from the test strip surface consists of green light-emitting diode, large area silicon photodiode, and anodized aluminum mounting block providing a slit structure for cutting light from the LED. The stepping motor of the deck was operated in the full step mode, whose distance of each reading point is about 0.15mm. The performance of the strip reader was tested by analysis of HBV(hepatitis B virus) antigen test kit. This strip reader can be useful for inexpensive, disposable, and membrane-based assays that provide visual evidence of the presence of an analyte in a liquid sample.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.217-219
• /
• 2004

In recent years, the smart card is wifely applied for wireless communication, tracking, transportation logistics, diagnostic monitoring, access control and security. RF-ID system is universally applicable. Passive RF-ID system consists from reader and passive tag. The reader transmits energy and simple information to a tag by wireless and the power from the reader is transformed for controller, FRAM and Bluetooth module. in this paper, an analysis and design of smart card for the transmission of the car movement data is presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1686-1697
• /
• 2011

This paper aims to build up a RFID-automated cargo movement system in an air-cargo warehouse. In our research, we do the spectrum measurements compliant with the RFID frequency bands to observe the interferences from legacy systems in the air-cargo warehouse. To overcome the dense-reader mode (DRM) problem, we apply three novel approaches, which are the periodic transmit of a reader, the Visible RFID reader & tag, and the sensor-based RFID system. Moreover, for the tag collision issue, we implement the Adaptive Adjustable Framed Q(AAFQ) algorithm, and the demonstration on RFID tag anti-collision algorithms show that the AAFQ algorithm has highly desirable tag anti-collision performance compared to any other commercially available solutions.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1358-1368
• /
• 2012

A tag sequence estimation scheme is to estimate the physical sequence of passive RFID tags that are linearly spread using the movement of a RFID reader. Since RFID readers communicate with the passive tags by very weak radio waves, scanning passive tags are unstable. In this paper, we applied round-trip scanning of a reader to enhance the tag sequence estimation. Proposed scheme first determines the turning point of the reader movement, and then estimates the sequence of the tags using the tag sets scanned in each read cycles. Test experiments show that the proposed scheme can improve the estimation accuracy.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.104-112
• /
• 2008

RFID/USN is considered important basic infra of ubiquitous community and tried practical adaption through various research. Specially, there is during researcher progresses for stock and state management of logistics to let you get at u-mart systems. It discern thing from warehouse to deliver as adhere RFID tag of palette in keeping unit of article and construct form of thing to analyze information of environment status using sence module based on function of wireless communication. in the paper, propose composition of customer satisfaction system using RFID chip in u-Mart status management system based on RFID/USN and according to analysis specific information of commodity, propose movement reader device to offer real-time information from customer. And it presents the improvement program for the provision of product information which is appropriate uses the RFID chip and the provision of control information in the customer who is a core of consuming.

• Korean Journal of Radiology
• /
• v.23 no.6
• /
• pp.649-663
• /
• 2022

The role of magnetic resonance imaging (MRI) in diplopia is to diagnose various diseases that occur along the neural pathway governing eye movement. However, the lesions are frequently small and subtle and are therefore difficult to detect on MRI. This article presents representative cases of diseases that cause diplopia. The purpose of this article was to 1) describe the anatomy of the neural pathway governing eye movement, 2) recommend optimal MRI targets and protocols for the diagnosis of diseases causing diplopia, 3) correlate MRI findings with misalignment of the eyes (i.e., strabismus), and 4) help familiarize the reader with the imaging diagnosis of diplopia.

• Korean Journal of Ecology and Environment
• /
• v.55 no.4
• /
• pp.294-304
• /
• 2022

This study carried out from March 2021 to October 2021 in the upper part (St. 1) and middle part (St. 2) section of Yongsu stream, a branch of the Geum river, using PIT telemetry to understand the movement patterns and habitat characteristics of Odontobutis interrupta, a Korean endemic species. O. interrupta collection was used kick net (5×5 mm) and fish trap (5×5 mm). After collecting fish, PIT tag insertion was performed immediately in the site. Reader (HPR Plus Reader, biomark, USA) and portable Antenna (BP Plus Portable Antenna, biomark, USA) were used for detection of fish to monitoring the tagged O. interrupta. As a result of PIT telemetry applied to 70 individuals, mean movement distance was 36.5 (SE, ±6.6) m. There was a significant difference between total length and movement distance (P≤0.05). O. interrupta was mainly identified in average water depth, 36.2±1.9 cm, average water velocity, 0.03±0.07 m s^-1 and average distance from watershed, 4.4±0.3 m. Extent of rock used for habitat was varied from 32 to 4,000 cm². There was no statistical difference between the area of the first selected rock and the area of the after selected rock (P>0.05). but there was significant difference between total length and the area of the rock except for detection before 24 hours (P<0.01). Therefore, to restore the habitat, it is considered necessary to create various substrate structures by providing various habitat environments (water depth, flow rate, stone, etc.) for each individual size.

• Ocean Systems Engineering
• /
• v.13 no.2
• /
• pp.195-224
• /
• 2023

This paper proposes a method for the acoustic imaging wherein the traditional requirement of the relative movement between the transmitter and target is overcome. This is facilitated through the beamforming acoustic array in the transmitter, in which the target is illuminated by the array at various azimuth and elevation angles without the physical movement of the acoustic array. The concept of beam steering of the acoustic array facilitates the formation of the beam at desired angular positions of azimuth and elevation angles. This paper substantiates that the combination of illumination of the target from different azimuth and elevation angles with respect to the transmitter (through the beam steering of beam forming acoustic array) and the beam steering at multiple frequencies (through SF) results in enhanced reconstruction of images of the target in the underwater scenario. This paper also demonstrates the possibility of reconstruction of the image of a target in underwater without invoking the traditional algorithms of Digital Image Processing (DIP). This paper comprehensively and succinctly presents all the empirical formulae required for modelling the acoustic medium and the target to facilitate the reader with a comprehensive summary document incorporating the various parameters of multi-disciplinary nature.

• Journal of computational fluids engineering
• /
• v.9 no.4
• /
• pp.7-12
• /
• 2004

In the present study a semi-automatic mesh generation program has been developed by using DXF file containing contour line data. The program consists of DXF file reader and mapping algorithm. Pre-generated 2-D planar mesh points are to be mapped one by one onto triangular surface whose three vertices are three nearest contour points surrounding the mapping point. The present program has been successfully tested for mesh generations for the road tunnel ventilation analysis and analysis of lava movement in mountain area.

• Progress in Medical Physics
• /
• v.11 no.1
• /
• pp.59-71
• /
• 2000

It is possible to obtain a fast CT scan during breath holding with spiral technique. But the risk of radiation is increased due to detailed and repeated scans. However, the limitation of X-ray doses is not fully specified on CT, yet. Therefore, the purpose of the present study is to define the limitation of X-ray doses on CT The CT unit was somatom plus 4. Alderson Rando phantom, Solenoid water phantom, TLD, and reader were used. For determining adequate position and size of organs, the measurement of distance(${\pm}$2mm) from the midline of vertebral body was performed in 40 women(20~40 years). On the brain scan for 8:8(8mm slice thickness, 8mm/sec movement velocity of the table) and 10:10(10mm slice thickness, 10mm/sec movement velocity of the table) methods, the absorption doses of exposed area of the 10:10 were slightly higher than those of 8:8. The doses of unexposed uterus were negligible on the brain scan for both 8:8 and 10:10. On the chest scan for 8:8, 8:10(8mm slice thickness, 10mm/sec movement velocity of the table), 10:10, 10:12(10mm slice thickness, 12mm/sec movement velocity of the table) and 10:15(10mm slice thickness, 15mm/sec movement velocity of the table) methods, 8:8 method of the absorption doses of exposure area was the most highest and 10:15 method was the most lowest. The absorption doses of 8:10 method was relatively lower than those of the other methods. In conclusion, the 8:10 method is the most suitable to give a low radiation burden to patient without distorting image quality.