• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.31-38
• /
• 2017

In this paper, we have designed MIMO system using F-OFDM modulation. And then, we have evaluated and analyzed synchronization performance of the system. In this paper we have considered Schmidl's method, Minn's method, and Park's method. As simulation results, Schmidl's method has wide plateau of timing metric and Park's method has impulse-shape timing metric. Also, we can confirm that timing metric characteristic of synchronization estimator can be degraded by adjusting filter length of F-OFDM system. Especially, we can confirm that timing metric of synchronization estimator is shifted according to filter length of MIMO system using F-OFDM modulation and this timing metric movement can be compensated by using designed filter length.

• Structural Engineering and Mechanics
• /
• v.13 no.5
• /
• pp.557-568
• /
• 2002

For the evaluation of the capability of a tubular member of an offshore structure to absorb the collision energy, a simple method can be employed for the collision analysis without performing the detailed analysis. The most common simple method is the rigid-plastic method. However, in this method any characteristics for horizontal movement and rotation at the ends of the corresponding tubular member are not included. In a real structural system of an offshore structure, tubular members sustain a certain degree of elastic support from the adjacent structure. End fixity has influences in the behaviors of a tubular member. Three-dimensional FEM analysis can include the effect of end fixity fully, however in viewpoints of the inherent computational complexities of the 3-D approach, this is not the recommendable analysis at the initial design stage. In this paper, influence of end fixity on the behaviors of a tubular member is investigated, through a new approach and other approaches. A new analysis approach that includes the flexibility of the boundary points of the member is developed here. The flexibility at the ends of a tubular element is extracted using the rational reduction of the modeling characteristics. The property reduction is based on the static condensation of the related global stiffness matrix of a model to end nodal points of the tubular element. The load-displacement relation at the collision point of the tubular member with and without the end flexibility is obtained and compared. The new method lies between the rigid-plastic method and the 3-demensional analysis. It is self-evident that the rigid-plastic method gives high strengthening membrane effect of the member during global deformation, resulting in a steeper slope than the present method. On the while, full 3-D analysis gives less strengthening membrane effect on the member, resulting in a slow going load-displacement curve. Comparison of the load-displacement curves by the new approach with those by conventional methods gives the figures of the influence of end fixity on post-yielding behaviors of the relevant tubular member. One of the main contributions of this investigation is the development of an analytical rational procedure to figure out the post-yielding behaviors of a tubular member in offshore structures.

• The Journal of Korean Physical Therapy
• /
• v.12 no.2
• /
• pp.95-105
• /
• 2000

Glenohumeral internal and external rotation with shoulder abducted in the frontal plane often causes impingement of the supraspinatus tendon. whereas similar activity in scapular plane does not cause impingement. The Purpose of this study was to determine if assessment among the three positions as 30 degrees, 60 degrees, 90 degrees abduction in the sitting position of the scapular plane could be affected the comparison between intemal and external peak torque, total work, average power. In this study, Isokinetic shoulder rotational strength was evaluated in twenty healthy male university students, using the Cybex NORMTM System (CYBEX Division of LUMEX, Inc., Ronkonkoma, New York). Test data was gathered in the plane of the scapular, 30 degrees of horizontal flexion anterior to coronal plane, and the subjects performed the test with the arm 30, 60, and 90degrees abducted in the sitting position. also, test speed was set at deg/sec. Statistical analysis was performed using SPSS 7.5 for Windows software and mean and standard deviations were calculated. ANOVA was used to analyze the difference of the values in the three test positions. A paired t-test was used of examining the difference in the means peak torque between external and internal rotation. Not any significant difference was found among three abduction positions in scapular plane, even though there was a consistent pattern of greater strength in the abducted position of 60 degrees. Internal relation strength peak torque and total work were greater than those of external rotation in every test positions.

• PNF and Movement
• /
• v.8 no.2
• /
• pp.25-36
• /
• 2010

Purpose : The purpose of study was to determine effects of Proprioceptive Neuromuscular Facilitation pattern exercise with Swiss ball exercise and Swiss ball exercise on balance in the 40 students from H university. Method : There were two experimental conditions. There were two difference groups in the experimental conditions, which had to perform different exercise tasks: Swiss ball exercise group (n=20) and Proprioceptive Neuromuscular Facilitation exercise with Swiss ball exercise group(n=20). The experimental group received Proprioceptive Neuromuscular Facilitation exercise for 20minutes and Swiss Ball exercise for 40minutes, 3 times a week for 4weeks. While another experimental group received Swiss Ball exercise for 40minutes, 3 times a week for 4weeks. In order to evaluation effects of the Proprioceptive Neuromuscular Facilitation pattern exercise with Swiss Ball exercise and Swiss Ball exercise in the two different experimental group, subjects was measured by static balance. Statistical analysis was the paired t-test to compare the differences within groups and the SPSS to analyze the differences between groups. Results : The result of this study were as follows: The static balance was higher for the two different experimental group in post-exercise than in pre-exercise(P<0.5). Proprioceptive Neuromuscular Facilitation pattern exercise with Swiss Ball exercise experimental group was significant difference better then another experimental group(P<0.5). Conclusion : The Proprioceptive Neuromuscular Facilitation pattern exercise with Swiss Ball exercise can result in improved static balance better then Swiss Ball exercise.

• Journal of Korean Society on Water Environment
• /
• v.34 no.5
• /
• pp.537-547
• /
• 2018

Sediment discharge by rainfall runoff affects water quality in rivers such as turbid water, eutrophication. In order to solve various problems caused by soil loss, it is important to establish a sediment management plan for watersheds and rivers in advance. However, there is a lack of sediment data available for estimating sediment discharge in ungauged basins.. Thus, reasonable research is very important to evaluate and predict the sediment discharge quantitatively. In this study, cluster analysis was conducted to classify gauged watersheds into hydrologically homogeneous groups based on the watershed characteristics. Also, this study suggests a method to efficiently predict the sediment discharge for ungauged basins by developing and evaluating the SDR equations based on the PA-SDR module. As the result, the SDR equations for the classified watersheds were derived to predict the most reasonable sediment discharge of ungauged basins with 0.24 % ~ 10.89 % errors. It was found that the optimal parameters for the gauged basins reflect well characteristic of sediment movement. SDR equations proposed in this study will be available for estimating sediment discharge on ungauged basins. Also it is possible to utilize establishing the appropriate sediment management plan for integrated management of watershed and river in Korea.

• Atmosphere
• /
• v.27 no.2
• /
• pp.133-150
• /
• 2017

This study evaluates CMIP5 model performance on rainy season evolution in the East Asian summer monsoon. Historical (1986~2005) simulation is analyzed using ensemble mean of CMIP5 19 models. Simulated rainfall amount is underestimated than the observed and onset and termination of rainy season are earlier in the simulation. Compared with evolution timing, duration of the rainy season is uncertain with large model spread. This area-averaged analysis results mix relative differences among the models. All model show similarity in the underestimated rainfall, but there are quite large difference in dynamic and thermodynamic processes. The model difference is shown in horizontal distribution analysis. BEST and WORST group is selected based on skill score. BEST shows better performance in northward movement of the rain band, summer monsoon domain. Especially, meridional gradient of equivalent potential temperature and low-level circulation for evolving frontal system is quite well captured in BEST. According to RCP8.5, CMIP5 projects earlier onset, delayed termination and longer duration of the rainy season with increasing rainfall amount at the end of 21st century. BEST and WORST shows similar projection for the rainy season evolution timing, meanwhile there are large discrepancy in thermodynamic structure. BEST and WORST in future projection are different in moisture flux, vertical structure of equivalent potential temperature and the subsequent unstable changes in the conditional instability.

• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.387-403
• /
• 2006

The purpose of this study was to develop a new torso pattern for the schoolgirl of a tween generation who had different somatotype from children and teenagers. The subjects in this study were female elementary school students of fifth or sixth grade. Through a sensory evaluation of four existing torso patterns, the first research torso pattern was developed. Drafting methods of each item, which closed to the optimum value three, were selected. The differences between the values of the selected drafting methods and the optimum three were verified through a Wilcoxon's ranked sum test. The final research torso pattern was developed through adjusting the drafting methods according to the deviation from the optimum value three. The schoolgirl of a tween generation is at the time to show the remarkable breast development compared with a waist circumference, so the bust drafting was defined as B/4+ 1.25cm separately front and back. The drafting of a waist circumference was defined as W/4+1cm separately front and back which taken the ease amounts of the somatotype into consideration of the schoolgirl of a tween generation. A princess line was used instead of a waist dart because their hip circumference was more developed than a waist circumference. The crossed amount of a front hemline was 0.3cm and that of a back hemline was 0.7cm. and the princess line of the position was drawn with a straight line at a right angle of the back waistline. The armhole depth was determined B/4-1cm in consideration of the aesthetic and the trend, although the effective movement of upper arm was required.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.1-14
• /
• 2015

This study mainly analyzes that designing patterns of an adult women Jeogori that takes advantage of patterns from each textbooks and complements the disadvantages based on the analysis of data from the dress evaluation and comparison of materials. The modification of a size specification is needed for the standard body as an adjust of the length of Jogori between front and back, mediation for bust width between front and back, a movement for the based line of Sup and Godae. As a result, the suitable pattern according to the standard somatotype is as below. Jeogori Length of front is determined by the length of back which was measured from side neck point to bust point plus three centimeters, and give three and half centimeters more in front. This three and half centimeters is for the curved in front of your body due to the chest. Bust width of front and back have to show the differences of human body. Bust width of front is calculated as bust girth into quarters and add two centimeters. Bust width of back gives one centimeter behind the curve from the center line in order to reduce the floating phenomenon. So, the amount of center back line dart is one centimeter. Arm hole girth measures as dividing bust girth into four. Also, Goedae width has two methods to measure. First, divide bust girth into ten equal parts and subtract 0.5 centimeters from it. Second, measure neck girth and divide it by four. Sleeve length is equal to Hwajang minus bust width of front. Hand wrist calculates in using bust girth. Make bust girth into quarters and multiply three fifths. Side line measures as deducting from Jeogori length of back to Arm hole girth and multiply two thirds.

• The Journal of Korean Academy of Prosthodontics
• /
• v.24 no.1
• /
• pp.105-116
• /
• 1986

In order to determine if a relationship exists between the clinical symptoms of TMJ dysfunction and the reproducibility of mandibular movements, twenty one subjects were chosen. The control group consisted of 5 subjects who were determined to be free from signs and symptoms of dysfunction . The sixteen experimental subjects were selected on the basis of their having dysfunctional symptoms. The author obtained two sets of pantographic tracings. Each set consisted of tracings from three both lateral and one protrusive movements. A second set of tracings were recorded immediately on the new recording papers using the same procedure as the first tracing. The tracings were scored by Pantographic reproducibility index (PRI). The obtained results were as follows. 1. Mean PRI scores of groups increased as the degree of dysfunction were increased. 2. For the groups of no or slight dysfunctional symptoms the PRI scores of the second tracing were smaller than the first one, wherea the scores of the second tracing from $D_2,\;D_3$ group were larger than the first tracing. 3. Differences between the mean PRI scores of control group and those of experimental group were statistically significant. 4. The second sets of tracings were more reliable statistically than those of first ones. 5. PRI can be used as a meaningful aid for the evaluation of the diagnostic and therapeutic results of treatment modalities for the TMJ dysfunction. 6. At 3east two sets of tracings should be recorded when the PRI is to be used to detect the incoordinated movements of TMJ dysfunction patient. 7. PRI scores of control group ($D_0$) was 137.7, thus, mandibular movement was reproducible, whereas PRI scores of experimental groups ($D_1,\;D_2,\;D_3$) were 22.5, 27.7, 30.45 respectively, thus were nonreproducible.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.973-976
• /
• 2008

Recently, it is increasingly reported that the deterioration of concrete structure under marine environments is due to diffusion and penetration of chloride ions. It is very important to estimate the diffusion coefficient of chloride ion in concrete. Estimation methods of chloride diffusivity by concentration difference is time-consuming. Therefore, chloride diffusivity of concrete is mainly conducted by electrically accelerated method, which is accelerating the movement of chloride ion by potential difference. However, there has not been any proper method for field quality control to closely determine the diffusion coefficient of chloride ion through accelerated tests using potential difference. In this paper, the various test methods for determination of chloride diffusion coefficient in concrete were investigated through comparison accelerated tests. From the results of estimated diffusion coefficient of chloride ion, relationship between the ponding test and acceleration test was examined.