• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.219-229
• /
• 2015

Objective : The purpose of this study was to analyze EMG according to surface type and elastic band usage during the pilates Superman movement. Method : The subjects were 10 female university students with a mean age of 27. The independent variables were surface type (yoga mat, air filled equipment, elastic mat) and elastic band usage. In order to measure muscle activity, the Noraxon(USA) was used. Eight muscles (upper trapezius, lower trapezius, thoracic spine, lumbar spine, gluteus maximus, gluteus medius, biceps femoris, semitendinosus) activation were analyzed. For the statistical analysis, MANOVA, independent t-test and Scheffe test for the post-hoc via SPSS 20.0 was used. Results : The left and right upper trapezius muscle activities were significantly reduced when using the elastic bands. In addition gluteus medius muscle activities significantly increased with the elastic band as well. Conclusion : According to the usage of the elastic band and the different types of surfaces, different muscle groups were recruited. Elastic bands were found to have more activation on the gluteus medius muscle meanwhile there was less activation on the upper trapezius during the pilates Superman movement.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.226-233
• /
• 2008

The objective of this study is to use the Korean Automobile Industry to exemplify typical problems with Korean capitalism by studying the structural characteristics of the Asian New Industrialization movement and analyzing the establishment and reorganization of the Korean Big Three System. Through comparative analysis taken from previous research, it was found that the Asian New Industrialization movement emphasized not only exports also but also included the importing of parts to Japan. Additionally, the pattern of development, technical accumulation, and other characteristics of the automobile industry were analyzed from the perspective of the Asian New Industrialization movement. Since the start of this movement is closely associated with the history of Korean capitalism, we have also analyzed the structural characteristics of the Korean New Industrialization movement. Through this analysis, that the study clearly shows that the Korean Automobile Industry has the framework characteristics of the Asian New Industrialization movement.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.6
• /
• pp.577-586
• /
• 2013

In a shipyard, it is hard to predict block movement due to the uncertainty caused during the long period of shipbuilding operations. For this reason, block movement is rarely scheduled, while main operations such as assembly, outfitting and painting are scheduled properly. Nonetheless, the high operating costs of block movement compel task managers to attempt its management. To resolve this dilemma, this paper proposes a new block movement analysis framework consisting of the following operations: understanding the entire process, log clustering to obtain manageable processes, discovering the process model and detecting exceptional processes. The proposed framework applies fuzzy mining and trace clustering among the process mining technologies to find main process and define process models easily. We also propose additional methodologies including adjustment of the semantic expression level for process instances to obtain an interpretable process model, definition of each cluster's process model, detection of exceptional processes, and others. The effectiveness of the proposed framework was verified in a case study using real-world event logs generated from the Block Process Monitoring System (BPMS).

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.46-51
• /
• 2011

High-rise buildings are widely being constructed in the Middle-East, South-East, and East Asia. These buildings are usually willing to stand for the landmark of the region and, therefore, exhibit some extraordinary features such as super-tall height, elevation set-backs, overhangs, or free-form exterior surface, all of which makes the construction difficult, complex, and even unsafe at some construction stages. In addition to the elaborately planned construction sequence, prediction and monitoring of building's movement during construction and after completion are required for precise and safe construction. This is often called the Building Movement Control during construction. This study describes Building Movement Control of the KLCC Tower, a 58-story office building currently being built right next to the famous PETRONAS Twin Towers. The main items of the Building Movement Control for the KLCC Tower are axial shortening and verticality. Preliminary prediction of these items are already carried out by the structural design team but more accurate prediction based on construction stage analysis and combined with time-dependent material testing, field monitoring, and site survey is done by the main contractor. As of September 2010, the Tower is under construction at level 30, where the plan abruptly changes from rectangle to triangle. Findings and troubleshooting until the current construction stage are explained in detail and implementations are suggested for future applications.

• Physical Therapy Korea
• /
• v.17 no.1
• /
• pp.36-42
• /
• 2010

The aim of this study was to investigate effects of reaching distance on movement time and trunk kinematics in hemiplegic patients. Eight hemiplegic patients participated in this study. The independent variables were side (sound side vs. affected side) and target distance (70%, 90%, 110%, and 130% of upper limb). The dependent variables were movement time measured by pressure switch and trunk kinematics measured by motion analysis device. Two-way analysis of variance with repeated measures was used with Bonferroni post-hoc test. (1) There were significant main effects in side and reaching distance for movement time (p=.01, p=.02). Post-hoc test revealed that there was a significant difference between 110% and 130% of reaching distance (p=.01). (2) There was a significant main effect in side and reaching distance for trunk flexion (p=.01, p=.00). Post-hoc test revealed that there were significant differences in all pair-wise reaching distance comparison. (3) There was a significant side by target distance interaction for trunk rotation (p=.04). There was a significant main effect in target distance (p=.00). Post-hoc test revealed that there were significant differences between 70% and 110%, 70% and 130%, 90% and 110%, 90% and 130% of target distance. It was known that trunk flexion is used more than trunk rotation during reaching task in hemiplegic patients from the findings of this study. It is also recommended that reaching training is performed with limiting trunk movement within 90% of target distance whereas reaching training is performed incorporating with trunk movement beyond 90% of target distance in patients with hemiplegia.

• The Journal of Korean Physical Therapy
• /
• v.25 no.2
• /
• pp.103-109
• /
• 2013

Purpose: This study was conducted in order to suggest an effective method of daily life movement training for stroke patients by comparison and analysis of the biomechanic characteristics of sitting up from a lying posture in stroke patients and healthy elderly participants. Methods: Fifteen stroke patients and 15 age-matched elderly participants were included in the study. The movement of sitting up from a lying posture was divided into three stages, and the differences in muscle activity in the sternocleidomastoid (SCM), rectus abdominis (RA), external oblique (EO), and rectus femoris (RF) during the movement were analyzed. Results: Subjects in the experimental group showed slower speed than those in the control group. In the neck joint, the change of angle in movement showed a larger decrease at all stages in the experimental group than in the control group; the movement also decreased in stages I and II in the upper trunk joint. The movement also showed a statistically significant decrease in stage II in the lower trunk, pelvic, and hip joints. The SCM showed higher activity in the control group than in the experimental group, showing a statistically significant difference; the RA showed high activity in the experimental group. The RF showed higher activity in the control group than in the experimental group, showing a statistically significant difference. Conclusion: From the results obtained above, increasing movements in the neck, pelvic, and hip joints and strengthening of lower body muscles are required in order to improve the ability for getting up from a lying posture in stroke patients.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.265-274
• /
• 2015

Objective : The purpose of this study was to analyze the effect of the elastic band on ballet arabesque based on kinematics analysis. Methods : To observe the effect of the elastic band, the availability of the elastic band during movement was set as the independent variable, and the dependent variables were set by using factors from two different categories such as motor mechanics and kinematics variables. For motor mechanics variable, the muscle activity and the center of pressure(COP)'s trajectory and velocity were used. Furthermore, the physical angle was used for kinematic variables. Data samples from the experiment was used to understand the correlation between independent and dependent variables while using paired samples t-test as a data analysis tool. Results : After analyzing the result of experiment, the usage of the Elastic band on ballet arabesque movement seemed to increase the activity of the agonistic muscle, which is mainly used for movement, and to improve the stability of the supporting leg by decreasing the trajectory and velocity of the center of pressure(COP). Moreover, the elastic band increased the level of elevation of the stretching leg with reducing the angle of the hip joint that resulted into a more stable movement and furthermore providing more beauty while standing on it. Conclusion : The movement training program while the using elastic band are expected to lead to appropriate muscular development and reduce the muscle imbalance, which usually occurs to dancers, during training with unfamiliar specific movements or strengthening muscular strength for a specific movement. In addition, this work is expected to be used as a training reference to understand and learn the fundamentals of movements of ballet and other dance fields.

• The korean journal of orthodontics
• /
• v.49 no.4
• /
• pp.205-213
• /
• 2019

Objective: The aim of this study was to evaluate the amount of tooth movement and histologic changes with different corticotomy designs and micro-osteoperforation in rabbits. Methods: The sample consisted of 24 rabbits divided into three experimental groups (triangular corticotomy [TC] and indentation corticotomy [IC] with flap, and flapless micro-osteoperforations [MP]) and a control. A traction force of 100 cN was applied by connecting the first premolars to the incisors. The amount of tooth movement was measured. Kruskal-Wallis test was used to assess differences in tooth movement between the groups. Micro-computed tomography, hematoxylin and eosin staining, and tartrate-resistant acidic phosphatase (TRAP) analysis were performed. Analysis of variance was applied to assess differences in TRAP-positive osteoclast count between the groups. Results: The amount of tooth movement increased by 46.5% and 32.0% in the IC and MP groups, respectively, while the bone fraction analysis showed 69.7% and 8.5% less mineralization compared to the control. There were no significant intergroup differences in the number of TRAP-positive osteoclasts. Conclusions: The micro-osteoperforation group showed no significant differences in the amount of tooth movement compared to the corticotomy groups, nor in the TRAP-positive osteoclast count compared to both corticotomy groups and control.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.4
• /
• pp.147-154
• /
• 2023

Objective: This study aimed 1) to compare the Landing Error Scoring System (LESS) score and movement patterns during landing of the lesser dorsiflexion range of motion (LDFROM) group to that with the greater dorsiflexion range of motion group, and 2) to identify the correlation between the weight-bearing dorsiflexion range of motion (WBDF ROM), LESS score, and movement patterns during landing. Method: Fifty health adults participated in this study. WBDF ROM was measured using the weight bearing lunge test while movement patterns during landing was assessed using the LESS. The joint angles of the ankle, knee and hip joints during landing were analyzed using the 2D video analysis. After mean value of WBDF ROM was calculated, participants were divided into two groups (GDFROM and LDFROM) based on the mean value. The Mann-Whiteny 𝒰 test was used to identify differences in movement strategies during landing between two groups and the Pearson's correlation analysis was performed to determine relationships between WBDF ROM and movement strategies. Results: The LDFROM group showed the poorer LESS score and stiffer landing kinematics during landing compared to the GDFROM group (p<0.05). In addition, DFROM was significantly related to the LESS score and landing kinematics (p<0.05) except for total hip excursion (p=0.228). Conclusion: Our main findings showed that the LDFROM group had poorer landing quality and stiffer landing movements compared to the GDFROM group. In addition, increase of WBDF ROM significantly improved landing quality and soft-landing movements. To reduce shock during landing such as ground reaction forces, individuals need to better utilize WBDF ROM and lower extremity movements based on our findings. Therefore, intervention programs for safer landings should include exercises that increase WBDF ROM and utilize eccentric contraction.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.191-194
• /
• 2006

This paper adopts nonlinear vibration method to analyze the fluctuation process of fiber movement. Based on Hamilton Principle, this paper establishes differential equation of fiber axial direction movement. Using variable-separating method, this paper separates time variable from space variable. By using the disperse movement equation of Galerkin method, this paper also discusses stable region of transition curve and points out those influencing factor and variation trend of fiber vibration.