• The Research Journal of the Costume Culture
• /
• v.21 no.3
• /
• pp.431-439
• /
• 2013

This study aims to give practical help to the pattern making of baggy pants produced in large quantity from industrial fields. The functionality of crotch part is a key element to decide wear sensation and comfort of pants as having direct influence on movements of legs in pattern designing of baggy pants. The industrial patterns of baggy pants in various styles that are released currently in Korea were collected and a comparative analysis was conducted on them for the thesis. First, samples of men baggy pants were collected from three different brands and compared the completion sizes. Secondly, it studied the most appropriate patterns as quantifying the appropriateness of movements through fitting tests. Finally, the study verified the differences of visual images by surveys of professional groups. The conclusions obtained from this research are as follows. In terms of aesthetic attribute among the three brands, A baggy pants, which had a small size tolerance, were the most appropriate. Meanwhile concerning the appropriateness of movement, B baggy pants were shown to be the most appropriate. This reveals explicitly the problem of aesthetic attribute and functionality, which are always in conflict during the pattern design. It is necessary to develop patterns and establish a measurement system that may satisfy both of these factors.

• Journal of Biomedical Engineering Research
• /
• v.22 no.3
• /
• pp.249-257
• /
• 2001

The voluntary contracted EMG signal of spinal cord injured patients is very small because the information from central nervous system is not sufficiently transmitted to $\alpha$ motor neuron or muscle fiber. Therefore the acquisited EMG signal from needle or surface electrodes can not be identified obvious voluntary contraction pattern by muscle movement. In this paper we propose the extraction technique of voluntary muscle contraction and relaxation pattern from EMG signal of spinal cord injured patient whose EMG signal is composed of the linear sum of mo색 unit action potentials with two noise sources, additive noise assumed to be white Gaussian noise and high frequency discharge assumed to be not motor unit action potential but impulsive noise. In order to eliminate impulsive noise and additive noise from voluntary contracted EMG signal, we use the FatBear filter which is a nonarithmetic piecewise constant filter, and multiscale nonlinear wavelet denoising processing, respectively. The proposed technique is applied to the EMG signal acquisited from transverse myelitis patients to extract voluntary muscle contraction pattern.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1183-1188
• /
• 2005

In this paper, we propose a 3D automated measuring system which measures the mandibular movements and the reference plane of the jaw movements. In diagnosis and treatment of the malocclusions, it is necessary to estimate the mandibular movements and the reference plane of the jaw movements. The proposed system is configured with double stereo-cameras, PC, two moving pattern plates(MPPs), two fixed pattern plates(FPPs) and one orbital marker. The virtual pattern plate is applied to calculate the homogeneous transformation matrices which describe the coordinates systems of the FPP and MPP with respect to the world coordinates system. To estimate the parameters of the hinge axis, the Euler's theorem is applied. The hinge axis points are intersections between the FPPs and the hinge axis. The coordinates of a hinge axis point with respect to the MPP coordinates system are set up to fixed value. And then, the paths of the jaw movement can be calculated by applying the homogeneous transformation matrix to fixed hinge axis point. To examine the accuracy of the measurements, experiments of measuring the hinge axis points and floating paths of them are performed using the jaw motion simulator. As results, the measurement errors of the hinge axis points are within reasonable boundary, and the floating paths are very similar to the simulator's moving path.

• Journal of Fashion Business
• /
• v.19 no.4
• /
• pp.37-56
• /
• 2015

This thesis aimed to determine the effecting factors(eating pattern, working condition, stress, health care) that help maintain the health of the cosmetologists' digestive system and the diseases involved (acid reflux, indigestion, gastritis, constipation & diarrhea). The research methods included survey and statistical analysis. The survey was conducted on 242 cosmetologists from August 30 to October 30 2014. The data analysis included frequency, cross table, ${\chi}^2$-test, and regression with SPSS(V. 14). The results were as follows ; (1) The cosmetologists' health of digestive system and eating pattern are related. Regular and enough meal times cause less digestive disease. Acid reflux, indigestion, gastritis, constipation and diarrhea are differently related with the type of usual eating pattern, especially, instant food is not good for digestive health. (2) The cosmetologists' health of digestive system and working condition are related. Longer daily working hours and exposure time to chemical odors are more likely to be associated with digestive diseases; whereas, longer time of standing and talking with colleagues are less likely to be associated with digestive diseases. (3) The cosmetologists' health of digestive system and stress are related. Headache, boredom, conflict of pay and compensation, and insomnia are not good for digestive health. (4) The cosmetologists' health of digestive system and health care are related. Periodical medical examination and usual body stretching are correlated with digestive diseases; whereas, people who do regular exercise and bowel movement are less likely to have digestive diseases.

• The Research Journal of the Costume Culture
• /
• v.17 no.4
• /
• pp.535-547
• /
• 2009

This study presented a making method of jeans pattern with high fitness after deriving the appropriate shrinkage rate by material and washing process. For this purpose of this study, 6 jeans have been tested after washing finishing and we turned out appropriate shrinkage rate by evaluating the exterior of jeans and usage satisfaction. Then, a making method of jeans pattern was presented after applying the optimized shrinkage rate. According to the result of the exterior evaluation of test jeans, all 6 jeans were rated high with scores close to 3.5. Following the evaluation of satisfaction of usage by physical movement, the highest ranking was in the order of walking with normal steps, back bending $90^{\circ}$, chair sitting, climbing stairs, and squatting. The shrinkage rate by physical area showed the highest score in the order of pants length, waist circumference, thigh circumference, knee circumference, hem circumference, hips circumference. In addition, the shrinkage rate was higher in warp direction than weft direction after washing finishing. As for the result of addition and reduction of pattern measurements by parts of jeans, waist circumference was 2.6${\sim}$5.2cm, hips circumference was 1.3${\sim}$4.2cm, thigh circumference was 0.8${\sim}$3.1cm and knee circumference was 0.7${\sim}$2.5cm. Also, hem circumference was 0.5${\sim}$1.8cm and pants length was 4.0${\sim}$6.2cm. That is, this results showed a wide range of addition and reduction according to material and washing finishing.

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.461-474
• /
• 2008

The purpose of this study was to present a making method of jeans pattern with high fitness after deriving the appropriate shrinkage rate by material and washing process. Research Method of jeans pattern was presented after applying the optimized shrinkage rate. According to the result of the exterior evaluation of test jeans, all 6 jeans were rated high with scores close to 3.5. Following the evaluation of satisfaction of usage by physical movement, the highest ranking was in the order of walking with normal steps, back bending $90^{\circ}$, chair sitting, climbing stairs, and squatting. The shrinkage rate by physical area showed the highest score in the order of pants length, waist circumference, thigh circumference, knee circumference, hem circumference, hips circumference. In addition, the shrinkage rate was higher in warp direction than weft direction after washing finishing. As for the result of addition and reduction of pattern measurements by parts of jeans, waist circumference was $2.5{\sim}5.2cm$, hips circumference was $-1.8{\sim}2.8cm$, thigh circumference was $-1.3{\sim}2.0cm$ and knee circumference was $-1.0{\sim}1.7cm$. Also, hem circumference was $-1.0{\sim}1.8cm$ and pants length was $2.9{\sim}6.2cm$. That is, this results showed a wide range of addition and reduction according to material and washing finishing.

• PNF and Movement
• /
• v.8 no.2
• /
• pp.25-36
• /
• 2010

Purpose : The purpose of study was to determine effects of Proprioceptive Neuromuscular Facilitation pattern exercise with Swiss ball exercise and Swiss ball exercise on balance in the 40 students from H university. Method : There were two experimental conditions. There were two difference groups in the experimental conditions, which had to perform different exercise tasks: Swiss ball exercise group (n=20) and Proprioceptive Neuromuscular Facilitation exercise with Swiss ball exercise group(n=20). The experimental group received Proprioceptive Neuromuscular Facilitation exercise for 20minutes and Swiss Ball exercise for 40minutes, 3 times a week for 4weeks. While another experimental group received Swiss Ball exercise for 40minutes, 3 times a week for 4weeks. In order to evaluation effects of the Proprioceptive Neuromuscular Facilitation pattern exercise with Swiss Ball exercise and Swiss Ball exercise in the two different experimental group, subjects was measured by static balance. Statistical analysis was the paired t-test to compare the differences within groups and the SPSS to analyze the differences between groups. Results : The result of this study were as follows: The static balance was higher for the two different experimental group in post-exercise than in pre-exercise(P<0.5). Proprioceptive Neuromuscular Facilitation pattern exercise with Swiss Ball exercise experimental group was significant difference better then another experimental group(P<0.5). Conclusion : The Proprioceptive Neuromuscular Facilitation pattern exercise with Swiss Ball exercise can result in improved static balance better then Swiss Ball exercise.

• PNF and Movement
• /
• v.5 no.2
• /
• pp.21-35
• /
• 2007

Objective : The main purpose of this study was to investigate the influence on lower extremity pattern of PNF to balance ability of patients with chronic hemiplegia. Methods : The subjects were consisted of 52 patients with chronic hemiplegia. All subjects were randomly devide to two group which was ROM exercise group and PNF group. Each group had a treatment for 30 minutes per day and three times a week during 10 weeks period. BPM was used to measure sway area, path, velocity, and BBS FRT TUG to measure patient's balance ability, ABC to measure patient's self-confidence. Results : 1. Sway area was showed that PNF group had more significantly decreased than ROM exercise group(p<.05). 2. Sway path was showed that PNF group had more significantly decreased than ROM exercise group(p<.05). 3. Max velocity was showed that PNF group had more significantly decreased than ROM exercise group(p<.05). 4. BBS was showed that PNF group had more significantly increased than ROM exercise group (p<.05). 5. FRT was showed that PNF group had more significantly increased than ROM exercise group (p<.05). 6. TUG was showed that PNF group had more significantly decreased than ROM exercise group(p<.05). 7. ABC was showed that PNF group had more significantly increased than ROM exercise group (p<.05). Conclusion : it was showed that the lower extremity pattern of PNF would increase balance abilities of the chronic hemiplegia patients. So it would be possible to make good use of lower extremity pattern of PNF for improving balance abilities of chronic hemiplegia patients.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.217-224
• /
• 2009

The traditional small educational multi-joint robots were developed on firmware. In these system's case, we cann't give a chance to educate good practices due on executing just robot's simple movements. But it may be possible for RTOS to control the elaborate movement of the robot with assembling each part on firmware. With this RTOS, we can enhance the efficiency of robot's movements, but too difficult to use the education as increasing the complexity of robot system. To solve the problem, we apply with Design pattern and Refactoring for the Education. Applying robot's design with Design pattern and Refactoring. There may be easily understand what and how to design RTOS for any level ones. We may easily change/upgrade RTOS for new system with this approach. This paper mentions to design RTOS with Design patterns and to apply RTOS's source code with Refactoring.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.7
• /
• pp.1008-1019
• /
• 2007

The purpose of this study was to develop an appropriate jacket pattern for elderly women over sixty years old, providing a good fit and appearance. Results were as follows: The length of the jacket was made long enough to cover the area 22.0cm below the waistline. The waist back length was made 1.7cm longer than the actual size of the waist back length. The armhole length was made 0.5cm longer than B/4, enhacing the appearance and functionality while allowing freer movement of the arms. As for the front and back interscye breadths, the front interscye breadth was made 1.7cm larger than the actual size while the back interscye breadth was only 1.0cm larger, providing the front interscye breadth more space. The bust breadth was made 10.0cm larger than the bust circumference measure(B/4+2.5cm), the waist breadth was made 6.0cm larger than the waist circumference measure(W/4+1.5cm), The hip breadth was made 12.0cm larger than the him circumference measure(H/4+3.0cm). The sleeve length was made 3.0cm larger than the arm length measure, as the sleeve length of a jacket is usually long enough to cover the ulnar styloid. The sleeve width was made 5.0cm larger than the upper arm circumference measure, as the upper arm circumference measure of the model pattern was too large than necessary, worsening the overall appearance. The sleeve cap height was set at AH/4+4.7cm. The wrist circumference of 27.0cm was set, allowing 2/3 and 1/3 for the large sleeve and small sleeve respectively.