• Journal of the Korean Institute of Educational Facilities
• /
• v.11 no.1
• /
• pp.25-37
• /
• 2004

This study is derived from a problem for the blind, how to recognize the space and how to find their way. Unlike ordinary people, the disabled people are closely related with special constructor environment using the other sense. Especially, to find his/her location, each person depends on the wayfinding ability as acquiring specific and various information,(e.g. recognizing figure by tactile sense, space size by auditory sense, direction by light from a window and regular noise, and existence of switch in a specific place.) Those senses help the person's wayfinding to his/her destination. The procedure of wayfinding are location, position, orientation, navigation, and movement. Consequently, construction for the people above mentioned can offer a design-guideline considering following factors, building arrangement considering regular noise, refurbishment, plan configuration of floor and wall-skin changed, circulation stream that maintains right angle by the regular noise in the building, enforcement location character by the inflow of the light into a crossing.

• Journal of the Korean Society for Railway
• /
• v.2 no.3
• /
• pp.36-45
• /
• 1999

The basic idea of cable-stayed girder bridges is the utilization of high strength cables to provide intermediate supports for the bridge girder so that the girder can span a much longer distance. In the cable-stayed bridge, the cables exhibit nonlinear behavior because of the change in sag, due to the dead weight of the cable, which occurs with changing tension in the cable resulting from the movement of the end points of the cable as the bridge is loaded. Techniques required for the static analysis of cable-stayed bridges has been developed by many researchers. However, little work has been done on the dynamic analysis of such structures. To investigate the characteristics of the dynamic response of long-span cable-stayed bridges due to various dynamic loadings likes moving traffic loads. two different 3-D cable-stayed bridge models are considered in this study. Two models are exactly the same in structural configurations but different in finite element discretization. Modal analysis is conducted using the deformed dead-load tangent stiffness matrix. A new concept was presented by using divided a cable into several elements in order to study the effect of the cable vibration (both in-plane and swinging) on the overall bridge dynamics. The result of this study demonstrates the importance of cable vibration on the overall bridge dynamics.

• Journal of ILASS-Korea
• /
• v.16 no.4
• /
• pp.201-209
• /
• 2011

Optimum engine performance is obtained when the spray characteristics is well matched to the geometry of a combustion chamber. Among many parameters governing the combustion performance in internal combustion engine, fuel supply characteristics and atomization are important performance factors. Therefore, spray characteristics of high pressure multi-hole injector has been studied experimentally. An experimental test system has been made to operate high pressure injection system and to visualize spray behavior. Spray visualization has been performed to analyze spray formation, spray cone angle, bent angle and penetration length. Spray interaction with piston has been analyzed with various injector installation angle, injection pressure and ambient pressure. Test results show that penetration length is greatly influenced by the injection pressure. Penetration length is decreased as ambient pressure increased. Spray cone angle is increased as injection pressure and ambient pressure increased. However, bent angle is not influenced by the change of injection pressure and ambient pressure. Spray cone angle distribution map is plotted using the experimental data. Fuel movement around the spark-plug has been enforced as increasing injector installation angle.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1110-1119
• /
• 2020

The Floating Absorber for Safety at Transient (FAST) is a safety device used in the innovative Sodium-cooled Fast Reactor (iSFR). The FAST insert negative reactivity under transient or accident conditions. However, behavior of the FAST is still unclear under transient conditions. Therefore, the existing Floating Absorber for Safety at Transient Analysis Code (FASTAC) is improved to analyze the FAST movement by considering the reactivity and temperature distribution within the reactor core. The current FAST system is simulated under a single control rod withdrawal accident condition. In this investigation, the reactor thermal power does not return to its initial thermal power even if the FAST inserts negative reactivity. Only a 9 K of coolant temperature margin, in the hottest fuel assembly at EOL, can lead to unnecessary insertion of the negative reactivity. On the other hand, the FASTs cannot contribute to controlling the reactivity when normalized radial power is less than 0.889 at BOL and 0.972 at EOL. These simulation results suggest that the current FAST design needs to be optimized depending on its installed location. Meanwhile, the FAST system keeps the fuel, cladding and coolant temperatures below their limit temperatures with given conditions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.842-847
• /
• 2008

Despite of the increasing number of the application of the drilled shaft pile in construction site, most of the study of pile capacity has been centered side shear resistance. But it is common that the drilled shaft is socketed on the rock so as to use the bearing resistance, so prediction of the toe's movement and characteristic of the bearing capacity is important as the side shear resistance. Therefore the model tests were performed in order to study the characteristic of bearing capacity on rock mass. The material of the test blocks were the mortar which was mixed with sand, cement and water, and test block size was $240{\times}240{\times}240mm$. Load was pressed by the 45mm of diameter of miniaturized pile and plate jack and steal plate were used to the confined stress for representing the underground condition. The relation of load-displacement was measured in many different conditions of rock mass such as direction of discontinuities, spacing and strength, and q-w curves of the toe of the pile were verified in each condition.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1166-1171
• /
• 2008

Despite of the increasing number of the application of drilled shaft piles in construction site, most studies on pile capacity have been focused on the side shear resistance. But it is common that the drilled shaft is socketed on the rock so as to use its bearing resistance. The prediction of the end movement and characteristics of the bearing capacity of the pile is great important as well. Therefore, a series of scaled model tests were carried out in order to study the characteristics of the bearing capacity on rock mass. The material of the test block was cement mortar which was mixed with sand, cement and water, and the size of a test block size was $240{\times}240{\times}240mm$. The axial load was applied by a miniaturized pile of 45mm in diameter and flat jacks and steel plate were used for confinement to simulate the real underground loading conditions. The relation of load-displacement was measured in various different conditions of rock mass such as strength, discontinuity of the rock mass and in-situ stress, so q-w curves of the end of the pile were presented for each condition.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.676-679
• /
• 2008

Numerical simulations of fluid injection into particulate materials were conducted to observe cavity initiation and propagation using distinct element method. After generation of initial particles and wall elements, confining stress was applied by servo-control method. The fluid scheme solves the continuity and Navior-Stokes equations numerically, then derives pressure and velocity vectors for fixed grid by considering the existence of particles within the fluid cell. Fluid was injected as 7-step into the assembly in the x-direction from the inlet located at the center of the left boundary under confining stress condition, 0.1MPa and 0.5MPa, respectively. For each simulation, movement of particles, flow rate, fluid velocity, pressure history, wall stress including cavity initiation and propagation by interaction of flulid-paricles were analyzed.

• Korea Journal of Hospital Management
• /
• v.20 no.4
• /
• pp.62-71
• /
• 2015

The purpose of this study is to investigate the intra CSR for the sustainable hospital management. The company was proactive stance on CSR carried out in the environmental field as a preemptive countermeasures movement of citizens and government regulations. CSR, while performing for employees, is recognized as a problem within the enterprise, it was reluctant to respond to the performance and results published. This study aims to determine whether the effect is substantially reflect If you want to include in the process of demonstrating the impact of CSR within the organization to make decisions in labor union composed of employees of internal stakeholders as a parameter. In particular, research in the field of performing a public function such situations, hospitals are lacking. Internal CSR performance of the general hospital (professional) in this study was found to have mad that the generally positive effect on improving labor productivity within the organization. In particular, its performance was more positive than in the virtuous cycle that meets the expectations and internal performance improvements improve equity executives expect employees to be borne if your blood and your liver collaborative decision-making behavior. Therefore, the internal CSR awareness by investing in sustainable management of the partnership is expected to achieve improved financial performance and labor productivity by performing more active at the same time.

• Carbon letters
• /
• v.11 no.2
• /
• pp.122-126
• /
• 2010

The alginate-based hydrogel was prepared as a pH-sensitive drug delivery system. To enhance the drug loading capacity, activated carbon was introduced as a drug absorbent. The iron oxide was incorporated into the alginate matrix for the magnetic transferring to the target organ. The activated carbon and iron-oxide were dispersed uniformly in the alginate hydrogel. The drug release from the alginate/activated carbon composite hydrogel was carried out in various pH conditions with vitamin B12 and Lactobacillus lamnosers as model drugs. The fast and sustainable release of drug was observed in the basic condition due to the pH-sensitive solubility of alginate. The novel drug delivery system having pH-sensitive release property and magnetic movement to target place was developed by using the alginate/activated carbon composite magnetic hydrogels.

• The Korean Journal of Ecology
• /
• v.20 no.4
• /
• pp.265-274
• /
• 1997

All landscapes are mosaics of habitat patches of different types. Therefore, there are always edged between habitat patches in a landscape. Forest animal has an important role in vegetation development and maintenance by seed dispersal around forest. Movement of animals depends on the spatially heterogeneous structure and pattern of vegetation landscapes because each animal has special habitats in a landscape. Especially, forast edge with high permeability and prey density is one of the important habitats to the animals. Therefore, understanding the ecological characteristics of the forest edges as a corridor connecting mosaic vegetation patches is necessa교 새 establish the strategies for the nature conservation and sustainable vegetation management. Under this idea, we examined the animal influenced on pine seeds as one of the method of monitoring the animal activity in mosaic vegetation. Man-made mosaic vegetations including open, edge and inner forests were carefully selected in the rural landscape. We carried out predation test on pine seeds during one year. A result was that damages on seed was more significant at forest edge than inner and open forest. Pine seed on seedbeds was mainly attacked by squirrels and mice than birds. Pine seed was damaged by squirrels in different types of vegetation by seasons. Rate of seed predation at forest edge was, in special, higher than that of other sites. According to this results, it is suggested that the relationship between animal behavior and spatial vegetation structure relating to human impact such as the distance from settlement to vegetation appeares to be in the rural vegetation landscape.