• Korean journal of applied entomology
• /
• v.27 no.2
• /
• pp.103-110
• /
• 1988

The behavior and circadian rhythm of emergence, copulation and oviposition in the Oriental tobacco budworm (Heliothis assulta Guenee) were studied to obtain the following results. More than three quarters of adults emerged within 3 hours after the light-off. It took about 33 min for an adult to expand and tan its wings after emergence. Adult male showed a sequential pattern of mating behavior, such as antennal movement, wing elevation and vibration, exten¬sion of hairpencils, and tapping of female ovipositor leading to a copulation. However, adult female revealed a rather simple behavior, such as protraction and retraction of her terminal abdomen and vibration of wings. All of the mating took place during the early part of the scotophase, with the peak from 1 hr to 2 hrs after the light-off. But the mating peak in virgin females tended to advance with age. Adult females showed the highest rate of mating among 24 hr-olds and the rate declined with age. The rate of first matings in males gave a very similar pattern to that of females. The duration of copulation was $77\pm$14min. Oviposition occurred throughout the entire scotophase, with the peak during the first 2 hrs. The most nu¬mber of eggs deposited daily was seen on the 3rd day after the mating. Mating rate, number of eggs laid and longevity we~e compared under different sex ratio. Unmated adults lived longer than mated adults.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.9
• /
• pp.51-62
• /
• 2016

Parametric studies for various site conditions by using 3d numerical model were carried out in order to estimate dynamic behavior of soil-pile-structure system in dry soil deposits. Proposed model was analyzed in time domain using FLAC3D which is commercial finite difference code to properly simulate nonlinear response of soil under strong earthquake. Mohr-Coulomb criterion was adopted as soil constitutive model. Soil nonlinearity was considered by adopting the hysteretic damping model, and an interface model which can simulate separation and slip between soil and pile was adopted. Simplified continuum modeling was used as boundary condition to reduce analysis time. Also, initial shear modulus and yield depth were appropriately determined for accurate simulation of system's nonlinear behavior. Parametric study was performed by varying weight of superstructure, pile length, pile head fixity, soil relative density with proposed numerical model. From the results of parametric study, it is identified that inertial force induced by superstructure is dominant on dynamic behavior of soil-pile-structure system and effect of kinematic force induced by soil movement was relatively small. Difference in dynamic behavior according to the pile length and pile head fixity was also numerically investigated.

• Science of Emotion and Sensibility
• /
• v.22 no.2
• /
• pp.17-28
• /
• 2019

The touchscreen device is now commonly found in the form of mobile phones, tablet PCs, and other devices. Varied physical and visual experiences can be experienced through touchscreens. This study intended to explore how the physical and visual experiences provided by the touchscreen would affect people through their existing associations of behavior-attitude. Previous studies have found that certain behaviors affect attitudes. In particular, the approach-avoidance behavior has been noted to influence both social and personal attitudes. It was thus deemed necessary to ascertain the approach-avoidance effect exerted by touchscreens on the attitudes of users as the technology is widely used today. Experiment 1 provided an approach-avoidance experience via a touchscreen and demonstrated that touchscreen-based approach-avoidance dragging behavior on the touchscreen can affect a user's preference and purchase intent. It was found that a product that had been approached showed both higher preference and higher purchase intent than a product that had been avoided. Experiment 2 investigated whether a similar effect would occur when only the visual experience of approach-avoidance was provided. The outcome proved that products that had been visually approached had higher scores than products that had been avoided, both in terms of preference and purchase intent. The movement of the arm on the touchscreen (Experiment 1) and the visual perception of the approach-avoidance experience (Experiment 2) were both shown to influence participants' attitudes toward products. The results of this study suggest that the behavior and perception of users may be an important factor in designing touchscreen interfaces for online shopping.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.1
• /
• pp.92-99
• /
• 2012

Many wildlife habitats have been destroyed and fragmented during the rapid industrialization and urbanization process in Korea. It is essential to connect these fragmented habitats to reduce road-kill of many types of endangered urban wildlife. The site selection for wildlife passages must take into account the behavior of the wildlife species for safe crossing utilizing many artificial barriers in urban areas. This study attempted to identify potential wildlife passage sites for the endangered and protected leopard cats of Gangseo Ecological Park in Seoul, Korea. A space syntax analysis, an analytical technique to objectively evaluate the spatial configurations related to passage selection, found that the integration value represents the accessibility and connectivity of spaces. In this paper, this means that the bigger the integration value, the more frequently the leopard cat passes through. The leopard cats were captured and radio-tracked for 72 hours once a month from March to June of 2009. The ArcGIS and Animal Movement of Hawth Tools were used to analyze the home range and movement paths, and Axwoman 4.0 was used to analyze space syntax. The daily average movement distance was $2.099{\pm}1.08km$. During the survey period, the leopard cats crossed over an urban expressway more than 20 times, running the risk of road-kill. The range of global integration values was 0.458~1.834, while that of the local integration was 0.210~6.061. Five sites that met across the leopard cats' movement routes and roads were selected to measure the local and global integrate values. Among these sites, the higher the integration value, the higher the road-kill possibility. Thus, two of five sites with high global and local integration values were suggested as potential wildlife passage sites for the leopard cats. Now, three tunnel passages are under construction at the suggested sites for which local integration value was highest (LI=4.369). Further studies are scheduled to verify these potential sites as suitable wildlife passages.

• Journal of Music and Human Behavior
• /
• v.4 no.2
• /
• pp.84-105
• /
• 2007

Cerebral palsy is a collection of motor disorders resulting from damage to the central nervous system that arise in multiple handicaps including cognitive disorders, speech disorders, epilepsy, perception disorders, and emotion disorders. Today spastic cerebral palsy has become more prevalent because intensive care for newborns has resulted in higher survival rates for very small premature babies. Since the children grow the fastest in order for a development during one year after birth, the therapeutic intervention is provided as early as possible to the children with cerebral palsy. After seven year old, there is no effect of intervention. So, the necessity of early intervention to spastic cerebral palsied infants is increasing. The purpose of this study is to develop the music therapy activity program using the techniques of neurological music therapy(NMT), the therapeutic application of music to dysfunctions due to neurologic disease of the human nervous system, for rudimentary movement phase of spastic cerebral palsied infant. This music therapy activity program was developed on the basis of the major developmental tasks of the rudimentary movement phase, the period that children can acquire the most basic movement function at the 0 to 2. Then the developmental characteristics of spastic cerebral palsy were applied to this music therapy activity program. This music therapy activity program was classified to three domains, those are stability, locomotion, and manipulation. This study has been consisted of three steps, those are the development of the activities, the evaluation of the activities by th panels, and the adjustment and complement of the activities. Reviewing literatures and interviews were done for the development of the activities, and the evaluation the activities was done by seven music therapists. In the evaluation steps, the questionnaire was used for estimating the content validity and application efficiency. The adjustment and complement of the activities were evaluated by the panels who were participating in the music therapy for cerebral palsied children in the clinical setting, and the results of the adjustment and complement were confirmed by the panels. The evaluation was presented in a mean value with the comment of the panels. In conclusion, the music therapy activity program for the spastic cerebral palsied infants using the techniques of NMT was developed on the basis of the major developmental tasks of the rudimentary movement phase. The program is comprised of 38 activities, those are 14 activities for developing the stability, 10 activities for developing the locomotion, and 14 activities for developing the manipulation. The programed activities would bring out the answers in the affirmative for the conformance with infants' development phase, the harmony between the objective and the activity, the conformance with the cerebral palsied infants, the properness of the music and the instruments, and the utility in the clinic field. This results mean that this developed music activity program is appropriate to help spastic cerebral palsied infants progress their movement development by stages.

• International Journal of Automotive Technology
• /
• v.6 no.1
• /
• pp.45-52
• /
• 2005

Interrupted creep tests for investigating the structural degradation during creep were conducted for a Mod.9Cr-1Mo steel in the range of stress from 71 to 167 MPa and temperature from 873 to 923 K. The change of hardness and tempered martensitic lath width was measured in grip and gauge parts of interrupted creep specimens. The lath structure was thermally stable in static conditions. However, it was not stable during creep, and the structural change was enhanced by creep strain. The relation between the change in lath width and creep strain was described quantitatively. The change in Vickers hardness was expressed by a single valued function of creep LCR(life consumption ratio). Based on the empirical relation between strain and lath width, a model was proposed to describe the relation between change in hardness and creep LCR. The comparison of the model with the empirical relation suggests that about 65% of hardness loss is due to the decrease of dislocation density accompanied by the movement of lath boundaries. The role of precipitates on subboundaries was discussed in connection with the abnormal subgrain growth appearing in low stress regime.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.178-182
• /
• 2004

To establish the design criteria for construction of the rubble mound on improved ground, two kinds of analyses for the soil deformation behavior and the slope stability were performed on various cases for rubble mounds, soft grounds and back fills with application of the finite element method and the Bishop simplified method. The horizontal displacements and settlements at the crest of rubble mounds were analyzed as a function of the safety factor of embankments. The analyzed result shows that the soil movement increases considerably when the safety factor of rubble mounds is lower than 1.3.

• Journal of the Korean Geosynthetics Society
• /
• v.6 no.4
• /
• pp.39-48
• /
• 2007

This paper introduces a recently developed reinforced earth wall system with steel framed-facing. The new system incorporates a steel-framed facing that might be assembled on-site and steel strip or geogrid type reinforcements for backfill area. In order to enhance scenery view design of the wall construction, dual-structured facing is proposed in which room for planting space locates in the front of facing. A reinforced earth walls using the proposed system was constructed to verify constructability of the proposed system and facing movement and tensile characteristics of reinforcement were measured to understand the mechanical behavior.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.3
• /
• pp.31-40
• /
• 2008

The deformation behavior of the excavated behind ground due to the displacement shape of retention walls is predicted by numerical analysis, which can be performed using the artificial displacement method with elasto-plastic constitutive model. The displacement shape of the behind ground around the retention wall is similar to the displacement shape of the retention wall. However, far from the retention wall, it changes to the displacement shape of cantilever. The deformation (the settlement, the lateral movement) of the excavated behind ground can be decreased by restraining the upper displacement of the retention wall. The displacement shape of the retention wall due to excavation affects on the plastic failure zone and decreasing zone of stability of the excavated behind ground.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.4
• /
• pp.237-248
• /
• 2015

"Dynamic stabilization" systems have been developed in recent years to treat degenerative disorders of the spinal column. In contrast to arthrodesis (fusion), the aim here is to conserve intervertebral mobility to maximize comfort. When developing innovative concepts, many mechanical tests need to be carried out in order to validate the different technological solutions. The present study focuses on the B Dyn$^{(R)}$ "dynamic stabilization" device (S14$^{(R)}$ Implants, Pessac, France), the aim being to optimize the choice of polymer material used for one of the implant's components. The device allows mobility but also limit the range of movement. The stiffness of the ring remains a key design factor, which has to be optimized. Phase one consisted of static tests on the implant, as a result of which a polyurethane (PU) was selected, material no.2 of the five elastomers tested. In phase two, dynamic tests were carried out. The fatigue resistance of the B Dyn$^{(R)}$ system was tested over five million cycles with the properties of the polymer elements being measured using dynamic mechanical analysis (DMA) after every million cycles. This analysis demonstrated changes in stiffness and in the damping factor which guided the choice of elastomer for the B Dyn$^{(R)}$ implant.