• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.480-485
• /
• 2008

In this study, two types of ramjet intake were designed for the flight condition of Mach number 2 and 5 and numerical analysis was performed. In order to widen the flight envelope range(Mach number $2{\sim}6$), movable intake concept was applied. The central body was designed so that the capture area ratio which is one of most important factors of ramjet intake design could be adjusted. And various types of cowl and movable insert part of shell were designed in order to control throat area which could increase total pressure recovery. The numerical results showed that the designed ramjet intake could be applied in various flights Mach number.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.207-210
• /
• 2008

본 논문에서는 램제트 기관의 성능을 결정짓는 공기흡입구를 램제트 엔진의 비행 목적에 맞게 비행 마하속도 4에서 기본설계를 수행하였다. 순항고도 12km, Mach $2{\sim}6$의 넓은 영역에서의 운용을 가능하게 하기 위하여 가변형 공기흡입구의 개념을 도입하였다.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.35-42
• /
• 2000

In this study, the movable bed model testing was carried out so as to analyze bed profile changes including predicting scouring and deposition of bed profile and to solve hydraulic problems affecting with bed and both-bank between upstream and downstream of intake weir in the Nakdong river channel. The movable bed model testing consists of fundamental test, movable model test and numerical analysis method respectively. The fundamental test was enforced to analyze relationship of discharge and sediment load in the tilting flume. When the movable model test was worked, it was shown that sediment budget between input sediment load and output sediment load was balanced exactly. As a result of movable model test, it was presented that scouring and deposition changes in quantities between the upstream and downstream of modification weir were less than those of nature and planning weir. Finally, numerical analysis method was operated by 1-dimensional bed profile changes model ; HEC-6 model so as to complement unsolving hard problems during movable model test. So, modification weir will sustained the stable bed profile changes than any other weirs in the study channel.

• 물과 미래
• /
• 제28권1호
• /
• pp.107-120
• /
• 1995

본 연구는 네팔의 Modi Khola 강 유역에 건설되는 Modi Khola 수력발전소의 취수구 구조물 및 침사지 구조물에 대한 수리모형실험 연구이다. 취수구 구조물은 축척이 1:20인 정상모형으로, 침사지 구조물은 수직방향 축척이 1:10, 수평방향 축척이 1:15인 왜곡모형으로 제작되었다. 본 실험에서는 이동상 모형이론에 의해 'Anthracite'($\rho_s$ =1.48)를 모형사로 선택하였다. 실험결과 취수구 구조물 부분에서는 세사영역의 유사퇴적을 막기 위해 적정한 높이의 guide wall 설치가 바람직하며, 효율적 배사를 위해 배사수문의 적절한 조작이 필요한 것으로 나타났다. 침사지 구조물 부분에서는 효율적인 침사를 위해 침사지내의 난류호흡을 억제시키는 설계가 요구되었고, 침사지내 퇴사를 처리하기 위하여 설치된 유출구측의 배사 파이프는 침사지 전영역의 배사를 효율적으로 수행하지 못하였으므로 최대 퇴사가 발생하는 지점 근처에 추가로 배사 파이프를 설치하는 것이 바람직하다. 또한 침사효율은 평균 약 95%로 관측되었는데, 비교적 좋은 침사지 설계라 판단된다.

• 한국추진공학회지
• /
• 제10권2호
• /
• pp.115-128
• /
• 2006

스크램제트 추진기술에 대한 최근 개발동향과 주요기술을 분석하였다. 스크램제트엔진은 지난 10여년간 급속한 기술 발전으로 지상시험에서 비행시험 단계에 접어들고 있으며, 수년 내 실용시험을 목표로 활발하게 연구개발 중이다. 광범위한 비행 마하수를 만족하는 이중연소램제트와 이중모드램제트 형태의 엔진은 각각 군용과 민수용으로 개발되고 있으며, 복합엔진은 차세대 우주발사체의 대안으로 개발되고 있다. 엔진 작동 특성의 미케니즘에 대한 정확한 이해와 이에 상응되는 기술, 흡열연료 및 CSiC 복합재료를 사용한 내열 문제 해결, 가변 흡입구와 노즐을 이용한 안정된 추진력 구현을 목전에 두고 있다.

• 한국물환경학회지
• /
• 제32권3호
• /
• pp.243-252
• /
• 2016

In cases of water pollution accidents, accurate prediction for arrival time and concentration of contaminants in a river is essential to take proper measures and minimize their impact on downstream water intake facilities. It is critical to fully understand the behavior characteristics of contaminants on river surface, especially in case of oil spill accidents. Therefore, in this study, the effects of main parameters of advection and diffusion of contaminants were analyzed and validated by comparing the results of Lagrangian particle tracking (LPT) simulation of Environmental Fluid Dynamic Code (EFDC) model with those of Global Position System (GPS)-equipped drifter experiment. Prevention scenario modeling was accomplished by taking cases of movable weir operation into account. The simulated water level and flow velocity fluctuations agreed well with observations. There was no significant difference in the speed of surface particle movement between 5 and 10 layer modeling. Therefore, 5 layer modeling could be chosen to reduce computational time. It was found that full three dimensional modeling simulated wind effects on surface particle movements more sensitively than depth-averaged two dimensional modeling. The diffusion range of particles was linearly proportional to horizontal diffusivity by sensitivity analysis. Horizontal diffusivity estimated from the results of GPS-equipped drifter experiment was 0.096 m²/sec, which was considered to be valid for applying the LPT module in this area. Finally, the scenario analysis results showed that particle movements could be stagnant when discharge from the upstream weir was reduced, implying the possibility of securing time for mitigation actions such as oil boom installation and wiping oil contaminants. The outcomes of this study can help improve the prediction accuracy of particle tracking simulation to establish the most suitable mitigation plan considering the combination of movable weir operation.

• 한국컴퓨터정보학회논문지
• /
• 제21권8호
• /
• pp.57-64
• /
• 2016

Initial prevention activities and rapid propagation conditions is the most important to prevent diffusion of water pollution. If water pollutants flow into streams river or main stresm located in environmental conservation area or water intake facilities, we must predict immediately arrival time and the diffusion concentration to the proactive. National Institute of Environmental Research developed water pollution incident response prediction system linking dam and movable weir. the system is mathematical model which is updated daily. Therefore it can quickly predict the arrival time and the diffusion concentration when there are accident of oil spills and hazardous chemicals. Also we equipped with mathematical model and toxicity model of EFDC(Environmental Fluid Dynamics Code) to calculate the arrival time and the diffusion concentration. However these systems offer the services of an offline manner than real-time control services. we have ensured the reliability of data collection and have developed a real-time water quality measurement data transmission device by using the data linkage utilizing a mode bus communication and a commercial SCADA system, in particular, we implemented to be able to do real-time water quality prediction through information infrastructure of the water quality integrated management business created by utilizing the construction of the real-time prediction system that utilizes the data collected, the Open map, the visual representation using charts API and development of integrated management system development based on web maps.