• Tuberculosis and Respiratory Diseases
• /
• v.44 no.4
• /
• pp.942-948
• /
• 1997

Benign Tracheobroncheal tumor is a rare disease such as 1.9% of all tumor of pulmonary origin. Because clinical manifestation of benign tracheal tumor resembles that of broncheal asthma, these patients are usually treated in a way that used in broncheal asthma. Therefore, the diagnosis is delayed. We experienced a case of tracheal neurilemmoma that cured by bronchoscopic laser therapy. A 23-year-old woman visited our hospital because of progressing dyspnea especially during inspiration. She was treated with aminophylline and 2 agonist under the impression of bronchial asthma at a local clinic. But because the symptoms were not relieved and pulmonary function test revealed variable extrathoracic lesion, we conducted bronchoscopy and biopsy. There were $1.5{\times}2cm$ sized movable mass with stalk attached right anterior wall of bronchus. The biopsy result was neurilemmoma. Therefore we conducted bronchoscopic Laser therapy four times and the lesion disappeared in bronchoscopy and chest CT.

• Tuberculosis and Respiratory Diseases
• /
• v.56 no.5
• /
• pp.550-554
• /
• 2004

A paragonimiasis infestation is caused by the paragonimus species. It is commonly found in the lung but has also been found to exist extrapulmonary infestations including cerebral, spinal, subcutaneous, hepatic, splenic, abdominal, urinary, and gynecologic infestation. On the other hand, a cutaneous infestation is extremely rare. Human infestation is caused by ingesting raw or undercooked intermediate hosts. Because paragonimus westermani larva mature to an adult worm in the lung, the possibility of identifying the adult worm of paragonimus westermani at extrapulmonary region is very rare. Case : After ingesting a fresh-water crab 1 month prior to the hospital visit, a 45-year old female patient was suffering from right pleuritic chest pain during that 1 month. The patient also complained of a palpable mass that was movable and migrating, and it was localized at the right upper quadrant of the abdomen. The eosinophil fraction of the white blood cell of peripheral blood and pleural fluid was elevated to 55.1% and 90%, respectively. Parasite eggs were not found in her sputum and stool examination. By using the enzyme-linked immunosorbent assay (ELISA), the paragonimus-specific IgG antibody titer was elevated to 0.28. During incisional biopsy, we were able to find the young adult worm of paragonimus westermani. We experienced the rare case of ectopic paragonimiasis with pleural effusion that was confirmed by identifying the adult worm of paragonimus westermani within the abdominal subcutaneous tissue. We report a case with brief literature reviews.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.338-347
• /
• 2006

A small hydro-power plant using the seawater used as the cooling (circulated) water and discharged is under construction. The bigger size of the small hydro-power plant, the better in order to maximize the efficiency and the electric power. The optimal size, however, should be determined in the constraints of the channel un-disturbed range. The water level change should be checked in detail based on the hydraulic behaviour. In this study, the FLOW3D model, three-dimensional flow model, is setup using the flow measurement data in the effluent discharge channel and the flow pattern changes due to the small hydro-power plant construction are predicted by the model. The plant construction makes the increasing of the water level, and the water level in the upstream of the channel weir is increased 65 cm from 4.32 m to 4.97 m, in the condition of the design discharge $156m^3/s$ and the movable weir height of the hydro-power plant 3.8 m.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.511-522
• /
• 2014

In this study, an innovative steel stair system is presented which enables rapid erection and high quality control in both residential and office building construction. This system features two lightweight steel stringers of box shape, bolted connections easy to absorb construction tolerance, and stair steps movable transversely (or sliding steps) such that the work space needed for concrete stairway wall could be easily provided. In this type of stairway system, other than providing robust connecting details, ensuring vibration performance is especially important since this system may be vibration-sensitive due to lightweight nature and/or probable low damping. To tackle these issues, a series of full-scale mock-up tests were conducted by using box-shape stringer members with or without concrete-fill. The connection system was shown to be sufficiently stiff and strong, or it remained elastic even under the 160% of service load level. Among the seven stringer alternatives, five exhibited satisfactory vibration performance according to the related North American and European acceptance criteria.

• Journal of Korea Water Resources Association
• /
• v.41 no.1
• /
• pp.65-74
• /
• 2008

The small and medium sized dams have the fill dam type of a lot of occasions, which are often weak in cases of major floods. For this reason, although a countermeasure is in great need, due to the importance of the facilities and financial situations, no direct safety measures have been taken. In this study, in order to minimize construction expenditure for practical safety measures in cases of major floods, the overflow section of spillway has been analyzed focusing on how the overflow capacity will increase in the case of partially rebuilding a part of the overflow section of spillway favorable for hydraulic conditions. The Labyrinth weir and movable weir was chosen for reconstruction models of the overflow section. Moreover, for analyzing the after-effects of the reconstruction, a small scale dam was temporarily chosen for various experiments such as the hydraulic model testing and the three dimension numerical evaluation through the use of Flow-3D.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.502-510
• /
• 2011

In this research, a wireless movable systems is introduced that is applicable for real-world clinical examination in order to resolve the inconvenience of wired motion analysis system which uses markers by measuring more accurately the angle of the 3D motion. The system is composed of bluetooth data transmission and 6 DOF inertial measurement system that is composed of 3-axis acceleration and 3-axis gyroscope. The samples were collected from 10 feet of 5 young children who were confirmed as patients having flat feet and achilles tendonitis by podiatric expert in pediatrics, and the validity of the system was evaluated by comparison with the opinion by the expert using the EMG data and the data measured by the developed system. ROM of ankle was measured by the difference between the maximum and the minimum peaks of 3-axis values (pitch, roll and yaw) measured at lateral malleolus bone, and based on this measured value, the eversion rate became relatively higher as flat feet state become worse, which is equivalent to the opinion from the podiatric experts. It was shown that there is a relation between the certain muscle activities and the abnormal motion of foot caused by disease.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.257-262
• /
• 2019

Lattice steel towers for overhead transmission lines have been replaced by tubular steel poles due to the visual impact of large and complex shape of truss type. Demand for tubular steel poles consisting of a single frame member continues to grow because of its advantages such as visual minimization, architectural appeal and minimal site consumptions. However, there are some constraints on the transportation and construction. As the diameter of tower base has been enlarged, it may exceed minimum height limit required to pass the tunnel in case of land transportation. Also, in a narrow place where it is not easy to secure the installation areas such as mountainous places, there might be some areas wherein it must secure a wide working space so that large vehicles and working cranes will be allowed to enter. In this paper, we presented a vertical separated tubular steel pole, which is a new type of support that can be implemented for general purpose such as mountainous areas or narrow areas to improve the issues raised by breaking away from the conventional design and fabrication methods. Technical approaches for overcoming the limit of the cross-sectional size is to separate and modularize the cross-section of the tubular steel pole designed with a size that cannot be carried or assembled, and to lighten it with a weight capable of being transported and assembled in a narrow space or mountainous area. As a result of this research, it will be possible to enter small and medium sized vehicles in locations where it is restricted to transport by large-sized vehicles. In the case of mountainous areas, it will be possible to divide it into a weight capable of being carried by a helicopter and it will be easy to adjust and fabricate it with individual modules. Furthermore, in order to break away from the traditional construction method, we proposed the equipment that can be applied to the assembly of Tubular Steel Pole without using a large crane in locations where there is no accessible road or in locations wherein large cranes cannot enter. In particular, this paper shows the movable assembling equipment and some methods that are specialized for vertical separated tubular steel pole consisting of members with reduced weight. The proposed assembly equipment is a device for assembling the body of the Tubular Steel Poles. It will be installed inside the support and the modules can be lifted by using the support itself.

• Journal of Korean Library and Information Science Society
• /
• v.37 no.1
• /
• pp.305-328
• /
• 2006

This paper is a bibliographic analysis on printed books of $M\grave{e}ngz\check{i}$(孟子) in Choseon Dynasty. Through examination of the physical characteristics of books in many institutes and private collections, $M\grave{e}ngz\check{i}j\acute{i}zh\grave{u}d\grave{a}q\acute{a}n$(孟子集註大全)was systematically explored, which was the most frequently published $M\grave{e}ngz\check{i}$(孟子) in Choseon Dynasty. $M\grave{e}ngz\check{i}$(孟子) was published mainly in Kyungki and Kyungsang provinces, and in the period of 17C to 19C. There are two streams of $M\grave{e}ngz\check{i}j\acute{i}zh\grave{u}d\grave{a}q\acute{a}n$. One is the series of the reprinted edition of $M\acute{i}ngbon$(明本覆刻), originated from Saseookyungdaejun(四書五經大全), compiled by Hokwang(湖廣) and colleagues in $M\acute{i}ng$(明). The second is the series of Chungyuja books(丁酉字本) among movable type books of Choseon(朝鮮活字本), the contents of which being the same as the other stream. Also, $M\grave{e}ngz\check{i}d\grave{a}iw\acute{e}n$(孟予大文) and $M\grave{e}ngz\check{i}zh\grave{e}ngw\acute{e}n$(孟子正文) are frequently published.

• Archives of design research
• /
• v.15 no.4
• /
• pp.129-138
• /
• 2002

Against the projection that the volume of filing would be drastically cut in the Information Age, the needs for filing in this age increases gradually. In this respect, it is critical to study the design of office filing system furniture. Through this study, we could find out what shall be the major requirements for office lijillg system furniture. This study would also provide important raw data for developing more efficient and more satisfactory office filing system furniture. Subject for this study includes 6 representative filing system furniture including a lateral file cabinet. For the design analysis, we used catalogues of foreign and domestic office furniture, particularly filing system furniture. The analysis is classified into the following six categories such as size, shape, color, material, handle, and filing method, mobility, flexibility, and so on. According to the analysis of office furniture in the market, requirements of furniture fit for office environment are found to be as follows. -Instead of the fixed-type furniture, movable furniture is more adaptable to the ever-evolving office environment. -Design the office furniture in accordance with a standardized module would provide a more unity and diversity of arrangement in space particularly when it is arranged with other furniture. -Development of more diverse color, which ranges from achromatic color to wooden color to other various colors, is more favored in the ever-changing office environment. -As the grip provides a variety of image to the furniture let alone its function, its development is required to be more diverse and more conforming 10 the design of Ihe furniture. -The filing methods in general are with drawer and shelf, among which the drawers design is usually fixed. However, under the evolving office furniture environment, the design of Ihe drawer, bolh inlerior and exterior, shall be more diverse and flexible.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.101-101
• /
• 2011

현재 국내에서 시행되고 있는 '4대강 살리기 사업'은 하천에서 발생하는 홍수 및 가뭄재해방지를 위한 다양한 공학적 노력을 시도하고 있다. 특히 안정적인 수위 및 유량확보와 홍수방지를 위한 보(weir)가 4대강 유역에 16개 설치되고 있다. 이러한 보 구간에는 고정보와 가동보가 복합적으로 설치되고 있으며 가동보는 그 형상과 운영방식에 따라 다양한 설계방안이 적용되었다. '4대강 살리기 사업' 중 낙동강 23공구의 강정보 공사 구간에는 원호형태의 측면 형상을 갖는 라이징 섹터게이트(Rising sector gate)가 적용되었다. 라이징 섹터게이트는 구조물의 높이가 낮고 수문의 개폐장치가 수문피어 구조물 내에 설치되어 경관이 우수하며, 구조가 간단하여 비체와 수류의 안정성이 뛰어나기 때문에 4개의 공사구간에 적용되었다. 따라서 본 연구에서는 강정보의 가동보 구간 2문 중 1문을 1/100 축척으로 제작하여 가변경사 개수로에 설치하고, 홍수 빈도별 상류 유량 조건과 하류단 수위조건으로 케이스를 정하여 실험을 수행하였다. 본 실험에서 사용한 개수로 장치는 너비 0.6 m, 높이 0.8 m, 그리고 길이 15.0 m(측정가능 구간, 헤드탱크와 테일게이트 부제외)의 개수로 실험장치이다. 측부는 모두 강화유리로 되어 육안관찰 및 계측 시 용이하게 제작되었으며, 순환식 유량 공급장치를 구축하여 수로의 하부에 설치된 유량탱크로부터 계속적으로 순환하도록 설계되었다. 또한 수로 하단으로부터 상단방향으로 약 33 m 지점에 전동 유압식 Jack screw 2기가 설치되어 경사도를 조절할 수 있도록 제작되었다. 유량조절용 판넬의 제어기판에는 디지털 경사계가 설치되어 있기 때문에 보다 정확한 경사도의 조절이 가능하다. 보 모형의 총연장은 53 cm이며 폭은 45 cm이다. 섹터게이트의 게이트부분은 직경 15 cm로 설계하였다. 문주부분을 포함한 모든 모형은 아크릴로 제작하며 레이저의 주사를 방해하지 않으며 투과율을 최대로 할 수 있도록 고강도의 아크릴을 가장 얇게 하여 중공형태를 채택하였다. 실험조건은 우선 보의 운영방안에 따라 게이트의 4가지 개방도를 설정하였고, 특히 평수위조건에서는 보의 상류부에 퇴적된 퇴적물의 세척을 위한 flushing 운영개방도 포함되어 있다. 홍수시에 대한 유량조건은 2년 빈도에 해당하는 유량을 수문의 비율과 상사법칙에 따라 설정하였으며 하류단 수위조건도 동일한 조건에 대한 값을 채택하여 적용하였다. 유동장의 해석을 위해서는 비접촉식 계측방법인 PIV(Particle Image Velocimetry) 시스템을 채택하여 2차원(x-z 방향) laser sheet를 생성하고 주입된 particle에서 반사된 변위(displacement) 정보를 상호상관(cross-correlation)기법으로 유동장을 계산하였다. 또한 수리모형과 동일한 지형격자를 구축하여 3차원 CFD 프로그램인 FLOW-3D로 계산하여 결과를 비교하였다. 특히 flushing 운영방안에 대한 게이트부의 개방도를 세가지(30, 45, $60^{\circ}$)로 구분하여 모의하였고, 적절한 개방도를 제안하고자 하였다. 실험결과는 우선 4가지 운영방안에 대한 가동보 주변에서의 유속장을 파악하였고, 최대유속의 발생위치의 변화를 확인할 수 있었다. 그리고 이에 따른 보의 바닥에서 최대유속이 발생할 경우, 하상보호공 위치와 거리 등에 대해서 분석하였다. 이를 통해 가동보 운영에 따른 다양한 유속구조를 파악할 수 있게 되며 구조적 안정성 확보를 위한 검증자료로 활용될 수 있을 것으로 예상된다. 향후, 가동보 운영방안 중 수세효과(flushing effect)에 대한 효과분석을 위해 게이트부 상류구간에 적절한 입경과 비중의 퇴적물질을 설치하는 연구와 상류부에서의 유입유사농도 및 시간변화에 따른 퇴적에 관한 연구를 수행할 계획이다.