• Korean Journal of Construction Engineering and Management
• /
• v.16 no.5
• /
• pp.12-20
• /
• 2015

Construction industry pays attention to modular construction recently which based on factory production not on labor intensive site production. Since modular construction has high time shortening effect and easiness of demolition and recycling, it has been applied to the temporary residential building. Domestic modular construction market are not activated yet, however, due to the high initial cost to realize modular construction. This study proposes demand-sensitized movable modular building in order to reduce the financial burden. The study compares between RC method building and Modular building which moves building when the demand falls off from Life-Cycle Cost's viewpoint. As a result of the economical evaluation, RC method achieved profits faster than Modular model, but Modular model's gross earnings during the life-cycle are much bigger than RC method. In other words, the result means that the market-sensitized movement of the modular building would be an economci choice in Life-Cycle Costing aspect.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.167-170
• /
• 2005

This study aims to develop a detachable 'Infill Components' applicable to open housing. Recently, the need for innovative housing methods is increasing because of the environmental preservation issues and the need for favorable housing stock resulting from the increased housing supply ratio. In order to maintain favorable housing stock, there has to has a to be a shift from typical plans and construction methods for mass production to those with some identity, which may satisfy various needs of dwellers. In this light, the Ramen structure has become popular owing to the growth of remodelling market, and construction companies tend to adopt flexible type multi-family housings to increase sales by appealing to their customers. However, there are few domestic studies on the Infill components for the change of structure. As a result, further studies may have to be based on the case study. The purpose of this research is to provide fundamentals for the development of infill components corresponding to the structural change, especially for the development of partition walls that can be easily moved by dwellers. By reviewing problem of construction, arrangement of the movable partition wall system and door system which has within wring in the first Experimental Open Housing in Korea at KICT(KOHP21), this research provides the fundamentals for developing a movable partition wall acceptable to the dwellers who may want to remodel the interior to meet the needs of themselves.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.4
• /
• pp.375-388
• /
• 1994

When conducting movable bed tests in a narrow wave tank, the hydrodynamics and morphology are assumed to be two-dimensional; hence, any three-dimensional patterns such as cross-tank variations of the profiles are neglected or averaged to represent the mean profiles at the measuring time. In this paper, six movable bed tests were carried out with a fairly fine sand to investigate (1) whether or not three-dimensional features can occur in relatively narrow wave tanks, and (2) various possible interrelationships and causes of the three-dimensionality. These movable bed studies suggested that there was a relatively slow feedback between the hydrodynamics and the morphology that led to initiation and growth of 3-D morphological features, resulting in cross-tank profile variations under certain stages of profile development, especially when the profile approached an equilibrium with overall stability.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.356-364
• /
• 2017

The process of inspecting electric railway vehicles is complicated and these vehicles accompany a risk of safety accidents. This developed system will be a great help in simplifying the shunting process and be very useful in terms of ensuring safety and providing user convenience. In this paper, the results of performance evaluation tests are studied on a movable catenary system for railway vehicles that secured mechanical durability, convenience, and operator safety by applying a specific rigid bar catenary of an existing mobile train line. We presented an analysis of the basic characteristics for site installation including sorting. In conclusion, this developed system was obtained in good results through durability test, durable mechanical load test and safety test in require specifications.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2021

In this study, a real-sized experimental equipment (pilot plant) was built at the site based on the preliminary research data to develop a movable separator for the mixed construction waste that can be implemented in agricultural areas to review its feasibility through the evaluation of its separation efficiency by waste types. The final construction of the movable separator and experimental results of the separation efficiency are summarized as follows. 1) The separation performance according to the blade type was the best for the combustible wastes either with 26 numbers of L-type blades and 32 numbers of pin type blades. As far as combination of blade types, when the L-type and pin-type were combined, the best separation efficiency was achieved. 2) The separation efficiency for waste wood by the conveyor type and angle of inclination (slope) of the trommel was the best when the conveyor had ribs of seagull shape with the angle of inclination 45°. 3) The separation efficiencies by process showed that 65.9% was separated as inorganic demolition wastes, 18.2% as waste woods, and 16.0% as combustible wastes at conveyor speed of 2-3 rpm, and the error rate was the least from the waste types generated in the dismantle site.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.605-611
• /
• 2023

In this study, in order to reduce energy that affects the natural environment, a moving iron core type welding machine and a digital welding machine (inverter type) with low power consumption are compared in shielded arc welding, and the parts that use less power and have the same weldability conditions are identified. want to check. The movable iron core welder uses alternating current that outputs a sine wave, and the digital welder also generates a sine wave alternating current, so it must have the same conditions, low power consumption, and the same weldability. However, weldability can be verified in various ways, but the analysis is limited to the qualification test in the field of national technical qualification welding.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.328-333
• /
• 2007

In this paper, we describe characteristics of a movable bridge called the Anjok and propose an improved string model which has delay line controller in physical modeling of the Gayageum. Movable bridge, the Anjok determines the length of vibrating string and transmits the vibration of each string to the body of the Gayageum. We analyze the variations in frequency domain and implement the Anjok model as parametric form using the first-order polynomial fitting in logarithmic scale graph, because the length of string changes fundamental frequency. In order to implement the Anjok model, frequency fitting, tension fitting and frequency fitting using leaky integrator are used. The frequency fitting using leaky integrator has the best results among those. Proposed string model with the Anjok model can represent real tuning system of the real Gayageum and the proposed model could synthesize sounds which is similar to original sounds.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.146-169
• /
• 2018

Artificial or natural artifacts, which have historical, artistic, academic or scenic value as national, ethnic or global assets, are designated as "cultural heritages" under the Act on the Protection of Cultural Heritage. Cultural heritages can be divided into tangible cultural heritages, intangible cultural heritages, and monument and folklore heritages. In addition, depending on the object of designation, a cultural heritage can be designated either as a city or a provincial cultural heritage or a cultural heritage material, by a city mayor or provincial governor, and as a state-designated heritage by the administrator of the Cultural heritage Administration. The regular survey is a part of the policy for the preservation and management of state-designated heritages, which requires that surveys be undertaken every three to five years for the preservation, repair and maintenance of cultural heritages. It was stipulated in the Act on the Protection of Cultural Heritage in 2006, and since then has substantially contributed to the preservation and management of state-designated heritages based on the identification of damage to cultural heritages and the application of appropriate treatment measures. However, some parts of the guidelines on the regular survey, legislated in 2006, occasionally give rise to confusion in managing the regular survey system of state-designated movable cultural heritages, and need to be modified to facilitate the systematic management and improvement of the regular survey system. This study attempts to analyze the structure and operation of the regular survey system of state-designated movable cultural heritages, and proposes plans for improving the way of specifying each department which leads, manages and executes the regular survey, the process of entrusting the survey, and its guidelines and forms. I hope that these plans concerning the regular survey of state-designated movable cultural heritages will contribute to improving the quality and management of the system.

• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.729-737
• /
• 2018

This study investigates the sediment processes the Improved-pneumatic-movable weir through laboratory experiments considering changing channel slopes. Experimental results show that the delta migrates towards the weir and the delta height increases as time passes. Moreover, as the delta approaches the weir, the delta migration speed decreases. As the dimensionless delta location increases, the effective height of dimensionless delta and the dimensionless reservoir capacity increases. Therefore, under the same slope conditions, the sediment deposition volume of the delta is small as the channel slope is mild. This means that the channel slope affects the development of the delta in the upstream of the Improved-pneumatic-movable weir. At the beginning of the experiment, the foreset slope is mild. However, the foreset slope of the delta increases with water depth as the delta migrates downstream. Moreover, as the slope is mild, the ratio of delta front length to delta height is close to 1, and the dimensionless delta height and the dimensionless delta migration speed decrease. As the delta height increases, the water depth, the velocity approaching to the weir and the delta migration speed decrease.

• Journal of Radiation Protection and Research
• /
• v.45 no.2
• /
• pp.76-80
• /
• 2020

Background: To improve the measurement accuracy of liquid-scintillation counting for activity standardization, it is necessary to significantly reduce the background caused by thermal noise or after-pulses. We have therefore improved a movable 3 photomultiplier (3PM)-γ coincidence-counting method using the logical sum of three double coincidences for β events. Materials and Methods: We designed a new data-acquisition system in which β events are obtained by counting the logical sum of three double coincidences. The change in β-detection efficiency can be derived by moving three photomultiplier tubes sequentially from the liquid-scintillation vial. The validity of the method was investigated by activity measurement of ¹³⁴Cs calibrated at the Korea Research Institute of Standards and Science (KRISS) with 4π(PC)β-γ(NaI(Tl)) coincidence counting using a proportional counter (PC) for the β detector. Results and Discussion: Measurements were taken over 14 counting intervals for each liquidscintillation sample by displacing three photomultiplier tubes up to 45 mm from the sample. The dead time in each β- and γ-counting channel was adjusted to be a non-extending type of 20 ㎲. The background ranged about 1.2-3.3 s^-1, such that the contributions of thermal noise or after-pulses were negligible. As the β-detection unit was moved away from the sample, the β-detection efficiencies varied between 0.54 and 0.81. The result obtained by the method at the reference date was 396.3 ± 1.7 kBq/g. This is consistent with the KRISS-certified value of 396.0 ± 2.0 kBq/g within the uncertainty range. Conclusion: The movable 3PM-γ method developed in the present work not only succeeded in reducing background counts to negligible levels but enabled β-detection efficiency to be varied by a geometrical method to apply the efficiency extrapolation method. Compared with our earlier work shown in the study of Hwang et al. [2], the measurement accuracy has much improved. Consequently, the method developed in this study is an improved method suitable for activity standardization of β-γ emitters.