• 제목/요약/키워드: Mounting Location Selection

검색결과 4건 처리시간 0.015초

다목적 헬기용 DIRCM의 시뮬레이션 기반 장착위치 선정 연구 (A Study on Simulation-based Mounting Location Selection of DIRCM for Multi-purpose Helicopter)

  • 이명석;신백천;허장욱;김미정
    • 시스템엔지니어링학술지
    • /
    • 제15권1호
    • /
    • pp.9-15
    • /
    • 2019
  • DIRCM is a device that deception missiles by directing the light source to missile seeker with infra-red laser based turret. The effectiveness of the device is affected by changes of the turret's Field of View (FoV), and also influence of the interference devices determines the effect of the DIRCM's effectiveness. Therefore finding mounting location for DIRCM is critical parameter for the DIRCM's effectiveness. so we applied stiffness review, interference analysis, FoV analysis and simulation analysis method to Multi-purpose helicopter for the find DIRCM location. As a result, in case of 1 DIRCM mounted at helicopters bottom shows 30~40% survivability. case of 2 DIRCM mounted at both side shows 70~80% survivability.

Optimized Location Selection of Active Mounting System Applied to 1D Beam Structure

  • Kim, Byeongil
    • 한국산업융합학회 논문집
    • /
    • 제25권4_1호
    • /
    • pp.505-511
    • /
    • 2022
  • The objective of this article is finding optimized locations of active mounts applied to 6-DOF beam structure with two active paths. When sinusoidal excitation forces are applied to the beam structure, secondary forces from two active mounts which can minimize (ideally becoming zero) transmitted forces are calculated mathematically and the vibration attenuation performance is validated through computer simulations. When the force applied to two active mounts are relatively low, those specific locations are considered as optimized location of active mounting system. As the location of mount changes, amplitude and phase of secondary forces in each path are analyzed with 3D plots. Based on the simulation results, a criterion for selecting mounting location is suggested and it would be very useful for selecting actuators for active mounts appropriately.

스포일러 동적 작동에 따른 에어포일 공력특성 역전현상 연구 (Computational Investigations of Adverse Effects of Deploying Spoilers on Airfoil Aerodynamic Characteristics)

  • 정형석
    • 한국항공우주학회지
    • /
    • 제48권5호
    • /
    • pp.335-342
    • /
    • 2020
  • 스텔스 성능을 향상시키기 위해 꼬리날개를 제거한 무미익 항공기는 러더(rudder)를 대체하여 스포일러(spoiler)를 활용하여 방향조종을 수행한다. 짧은 시간에 스포일러 작동을 반복하는 경우 비정상적(unsteady)이고 비선형적인 공력특성이 발생하여 항공기 비행성능에 역효과(adverse effect)를 초래할 수 있다. 본 연구에서는 dynamic mesh 기법을 적용한 전산해석을 통하여 스포일러 전개에 따른 에어포일의 비정상 공력 특성을 해석하였다. 스포일러 전개 속도, 장착 위치, 전개 스케줄(deployment scheduling) 변화에 따른 공력특성을 분석하여 스포일러의 동적 작동에 따른 역효과를 감소시킬 수 있는 방안을 검토하였다. 스포일러 장착위치 및 전개 방식의 적절한 선정을 통해 스포일러 동적 역효과를 감소시킬 수 있음을 확인하였으며, 에어포일 형상최적화를 통한 역효과 감소방안에 대한 추가적인 연구가 필요한 것으로 판단된다. 이러한 동적 공력 데이터는 향후 무미익 형태의 항공기 개발에 기초자료로 활용될 수 있을 것이다.

수송드론 가시선 데이터링크 안테나 배치 방안 연구 (Research on Antennas Placement of Line-of-sight Datalink for Transport Drone)

  • 임성호;성길영;김재경
    • 항공우주시스템공학회지
    • /
    • 제17권5호
    • /
    • pp.63-75
    • /
    • 2023
  • 수송드론의 탑재안테나를 전파간섭성이 적게 예상되고 장착 가능한 5곳에 배치하여 안테나 방사 패턴을 시뮬레이션 하였다. 장착 위치에 따라 링크 마진이 0 dB 이하인 확률은 5.41%- 26.92%로 나타났다. 안테나 2개를 배치하고 1개를 선택하는 경우에는 링크 마진이 0 dB 이하인 확률은 0.11%-3.3%로 나타났다. 그 중에서 안테나를 전방과 후방에 장착하고, 1개는 상부에 나머지 1개는 하부에 배치하는 경우가 유리하였으며, 그 중에서도 안테나 1개는 전방 상부에 1개는 후방 하부에 배치하면 링크 두절 확률이 가장 낮은 것으로 나타났다. 이 경우에 비행체의 자세 roll, pitch를 제한하면 운용 거리 12 km 이하에서는 링크 두절이 발생하지 않을 것으로 분석되었다. 이 경우에 대해서 안테나 선택 수식을 도출하였으며, 또한 안테나의 빈번한 교번을 방지하기 위해서 히스테리시스 개념을 적용하여 수송드론의 가시선 데이터링크를 안정적으로 유지할 수 있도록 하고자 하였다.