• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.4719-4725
• /
• 2013

본 논문에서는 ASM을 이용하여 전기 이륜차 장치에 대한 모델기반 설계 기법을 제시하였다. 실제, 전기 이륜차의 시제품 제작 이전에 전기 이륜차의 최적화와 동력을 예측하기 위해서는 신뢰성을 갖는 해석이 필요하다. 과거의 전기 이륜차 연구는 미시적 관점보다는 거시적 관점에서 실시되었다. 그러나, 본 연구에서는 전기 이륜차 핵심 부품에 대한 상세 해석을 실시하였다. 본 논문에서는 이론과 실험해석의 에러 비율이 2.3%에 달하는 양호한 결과를 얻을 수 있었다. 이 같은 상세 해석을 통하여, 전기 이륜차의 해석 정확도를 향상시키고 설계인자 해석이 가능하게 되었다. 또한, 본 연구에서는 전기 이륜차가 직면하고 있는 Fail safety에 대한 효과적 방법을 제시하였다.

• 한국유체기계학회 논문집
• /
• 제12권6호
• /
• pp.26-32
• /
• 2009

We have constructed loading apparatuses to electrical motor with a powder brake and a oil pump for load test of a several ten kilowatt-motor and performed load test with two motors. On operating the loading apparatus with a oil pump, temperature of the oil may excessively increase and fail to operate due to dynamic energy loss of equipment in oil loop. In order to control the oil temperature, factors of the energy loss were analyzed and the quantitative loss was calculated. Load tests of motors with two loading apparatuses constructed were successfully performed and strengths of each apparatus come out on operating.

• 전력전자학회논문지
• /
• 제22권1호
• /
• pp.53-59
• /
• 2017

The information on the actual voltages and actual currents of the motor is required for the sensorless control of a permanent magnet synchronous motor without rotor position sensors. In the model-based rotor position estimator of a PM synchronous motor, the reference voltages, which are the outputs of the current controller, are commonly used. The reference voltages in over-modulation regions for high-speed operation differ from the actual voltages applied to the motor. Consequently, the estimated rotor position and rotor speed may fail to track the real rotor position and real rotor speed. In this paper, the sensorless control for a PM synchronous motor in over-modulation regions for high-speed operation is proposed. The three-phase voltages applied to the motor are measured by using additional voltage detection circuits, and the performance of the rotor position estimator based on the measured three-phase voltages is validated through the experimental results.

• 한국자동차공학회논문집
• /
• 제25권1호
• /
• pp.19-27
• /
• 2017

In this paper, a simulator hardware and control design for an electronic parking brake (EPB) are proposed for emergency vehicle braking when the hydraulic break and anti-lock brake systems (ABS) fail to function. EPB systems are designed specifically for park braking and are usually installed on the rear wheels. However, in an emergency situation when all vehicle brake systems fail, the EPB can be utilized to stop the vehicle and track the target slip ratio as the ABS. This paper analyzed the non-linear EBP of the type of motor on caliper (MoC) based on experiments. A simulator hardware is also designed to validate the performance of the designed EPB controller in terms of braking distance and performance in tracking the target slip ratio. Through the experimental analysis, it is confirmed that a sliding mode controller can be applied on a non-linear EPB to track the target slip ratio.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.852-856
• /
• 2004

An induction motor is one of the most popular electrical apparatuses owing to its simple structure and robust construction. Parameter identification of the induction motor has long been researched either for a vector control technique or fault detection. Since vector control is a well-established technique for induction motor control, this paper concentrates on successive identification of physical parameters with on-load data for the purpose of condition monitoring and/or fault detection. For extracting six physical parameters from the on-load data in the framework of the induction motor state equation, unmeasured initial state values and profiles of load torque have to be estimated as well. However, the analytic optimization methods in general fail to estimate these auxiliary but significant parameters owing to the difficulty of obtaining their gradient information. In this paper, the univariate dynamic encoding algorithm for searches (uDEAS) newly developed is applied to the identification of whole unknown parameters in the mathematical equations of an induction motor with normal operating data. Profiles of identified parameters appear to be reasonable and therefore the proposed approach is available for fault diagnosis of induction motors by monitoring physical parameters.

• 설비공학논문집
• /
• 제22권3호
• /
• pp.130-138
• /
• 2010

The thermal reliability of the closed-type BLDC motor for the high speed axial fans is analyzed by a numerical method in this paper. Since the module and the motor part are combined in a closed case, the heat generated from a rotor in the motor and the electronic components in the PCB module can not be effectively removed to the outside. Therefore the module will easily fail by high temperature. The accelerated-life testing was accomplished to formulate the life equation and numerical method is used to predict the inside temperature of the PCB module, which is one of the life equation parameter according to the environment. When the environment temperature of BLDC motor is 21, 35 and 50 $^{\circ}C$, the temperature in the PCB space is predicted as 73.4, 87.5 and 102.4 $^{\circ}C$. Then the life time with the temperature are calculated as 2,239, 863 and 328 hours.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.494-499
• /
• 2007

The thermal reliability of the closed-type BLDC motor for the high speed axial fans is analyzed by a numerical method in this dissertation. Since the module and the motor part are combined in a closed case, the heat generated from a rotor in the motor and the electronic components in the PCB module can not be effectively removed to the outside. Therefore the module will easily fail by high temperature. The accelerated-life testing was accomplished to formulate the life equation and numerical method is used to predict the inside temperature of the PCB module, which is one of the life equation parameter according to the environment. The experiment for measuring the surface heat flux of the electronic components is carried out to apply the boundary condition of numerical study. When the environment temperature of BLDC motor is 21, 35 and $50^{\circ}C$, the temperature in the PCB space is predicted as 73.4, 87.5 and $102.4^{\circ}C$. Then the life time with the temperature are calculated as 2,239, 863 and 328.

• 센서학회지
• /
• 제27권2호
• /
• pp.126-131
• /
• 2018

Unlike the hydraulic power steering (HPS) system, which operates by the high pressure of a fluid obtained from the engine power, the motor-driven power steering (MDPS) system uses an electric motor to steer the wheel without consuming engine power. To steer the wheel with an electric motor, a worm wheel and a worm gear rotating between the steering shaft and motor are required. Any imperfection during the construction of an MDPS system or in a composing part creates noise and vibration, which can be sensed by a driver. To solve the noise and vibration problems, each part must be designed to not resonate with other parts. In this work, we developed the measurement and analysis systems to obtain the noise and the vibration of an automobile MDPS system. A signal analyzer was equipped with a 96 kHz, 24-bit ADC and a 150 MHz digital signal processor. The predetermined threshold value of the vibration in the MDPS system was used to determine the pass/fail, and the results were displayed on the screen. Our system can be used in the fabrication line to swiftly determine any imperfections in the MDPS system construction.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.196-199
• /
• 2009

급속 가열 상황에 있는 추진기관에 있어 가장 중요한 문제는 열해석으로 추진기관의 거동을 파악하는 것이다. 열은 추진제의 물성저하를 야기 시켜 자연발화 시킨다. 급속가열을 받는 추진지관에서 가장 바람직한 반응을 얻기 위해서는 추진기관의 케이스가 추진제에서 점화가 일어나기 전에 구조적으로 완전히 파손되어야 한다는 것이다. 본 논문에서 열해석을 위해 유한요소법을 이용하여 급속가열 상황에 놓인 고체 추진기관의 반응을 조사하였다.

• 한국항공우주학회지
• /
• 제39권7호
• /
• pp.682-687
• /
• 2011

일반적으로 탑재 교정을 위한 교정 반사경 구동장치는 교정임무 수행 시에는 주광경로 상의 전개위치로 반사경을 구동하며, 교정 후에는 주광경로와 이격된 수납위치로 반사경을 구동한다. 교정 반사경 구동장치의 결함 발생 시에는 반사경이 전개된 상태로 남아 주광경로를 차단하지 않도록 반사경을 강제 수납한다. 본 논문에서 제안한 결함 안전장치를 가지는 교정용 반사경 구동장치는 구동을 위한 스텝모터, 전개 및 수납 상태확인을 위한 마이크로 스위치, 베어링과 스프링의 기능을 동시에 갖는 피봇베어링 등으로 구성된다. 본 논문에서는 상기의 기능을 갖는 교정 반사경 구동장치 구현을 위한 구동장치 구성을 제안하였으며, 구성요소의 최적화 설계치를 도출하고 기능시험을 통해 결함안전 기능을 갖는 교정 반사경 구동장치의 유효성을 검증하였다.