• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.41-43
• /
• 2008

This paper deals with a study on characteristic of inductance on spoke type motor. The rotor and stator is redesigned as rounding teeth of stator and pole surface of rotor. Result, a shape of air-gap is changed and the cogging torque is reduced greatly. In consequence, the inductance of spoke type motor is changed. The Finite Element Analysis(FEM) is used to characteristics.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1519-1525
• /
• 2014

This paper presents the shape design for reducing cogging torque and characteristic analysis in Brushless DC (BLDC) motor. In this BLDC motor, ${\Delta}$(delta)-winding is applied, and in order to obtain the $60^{\circ}$ trapezoidal phase back-EMF waveform, permanent magnet shape design is carried out. And then, a method on specifying design parameters to effectively reduce cogging torque is developed. back-EMF, input voltage and input current which are analyzed by the Finite Element Method (FEM) are validated by experimental results. Also, efficiency calculations based on analysis and experimental results are performed and analyzed.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.138-140
• /
• 2001

In hybrid stepping motors, the shape of teeth is most important design variable which have critical influence on output characteristics. This paper deals with the characteristic analysis by change of teeth shape and present a improved model. FEM(Finite Elecment Method) and EMCM(Equivalent Magnetic Circuit Method) are used for analysis.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1143-1145
• /
• 2000

In this paper, it presents the design and implementation of a Microstep control IC using Programmable Logic Device(PLD). A Microstep driver is implemented with a 5-phase hybrid stepping motor, which has a Pentagon winding, power MOSFETs, and some devices to improve the system characteristics. The Microstep driving method is used for high performance motion control, low vibration and low noise in motor control system. The improvement of the electrical and mechanical driving characteristic of a step motor is achieved by applying microstep driver.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1162-1164
• /
• 2000

Stratum Axial Type BLDC Motor has remarkable efficiency owing to outstanding characteristics of speed and torque as well as its small size. In this paper 2-Degree of Freedom PI (TDOF PI) control method is presented in order to improve the efficiency of Stratum Axial Type BLDC Motor and the simulation proves that the separate control for speed characteristic from answering characteristic of load torque particularly allows the construction of superior control system to PI control system. These results are significant in that the improved Stratum Axial Type BLDC Motor enables the production of much smaller, lighter, and noiseless electric home appliances such as air-conditioner and refrigerator.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1996-2003
• /
• 2018

In this paper, the design and characteristic analysis of a novel single-phase hybrid switched reluctance motor (HSRM) for the purpose of replacing the universal motor in commercial blenders are presented. The proposed motor is easy to manufacture due to its simple yet robust structure with minimized power switches and no torque dead-zone. Moreover, the proposed HSRM is able to deliver a high starting torque as a requirement for blending hard food or even ice. The stator has permanent magnets (PMs) mounted on its inner surface and the rotor has a wide pole arc and salient poles that contribute to its high starting torque profile and the elimination of the torque dead-zone. Finite element method (FEM) is used to analyze the characteristic of the proposed motor. Finally, the prototype is manufactured and its performance is verified through experiments.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.325-327
• /
• 2007

This paper proposes a novel sensorless fault detection algorithm for a brushless DC(BLDC) motor drive system. This proposed method is configured without the additional sensor for fault detection and identification. The fault detection and identification are achieved by a simple algorithm using the operating characteristic of the BLDC motor. This proposed method can also be embedded into existing BLDC motor drive systems as a subroutine without excessive computational effort. The feasibility of a novel sensorless fault detection algorithm is validated in simulation.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1177-1179
• /
• 2005

This paper presents the characteristic analysis of slotless tubular type Linear DC Motor with Permanent Magnet excitation as variation of magnetic pole-pitch ratio. The stator armature winding of this motor is designed to wind at inner stator around the mover mounted with permanent magnet. First the practical model of this motor is made and its parameter is measured, after this simulation is carried out. Comparing the simulation results as variation of pole-pitch ratio, it can be seen that the reaching ability makes it useful in applications requiring a small, direct-drive actuator, which is required to extend into a specially constrained environment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.431-436
• /
• 2014

In this paper, temperature change properties on the 210kW-class Interior Permanent Magnet Synchronous Motor (IPMSM) are performed with the cooling performance of a water cooling device through the thermal characteristic analysis of the IPMSM considering a real driving pattern of urban railway vehicles. First, the thermal analysis modeling of 210kW-class IPMSM, which is an alternative to the conventional induction motor, and its water cooling device is conducted. Next, the thermal characteristic analysis of the IPMSM considering a real driving pattern of urban railway vehicles is performed using 2-Dimensional FEM tool. Finally, the calculated characteristic results are analyzed. Consequently, it is confirmed that the internal temperature of the 210kW-class IPMSM may be lowered to about 42~52% by maintaining the coolant flow rate of the water cooling device (Cross sectional shape of the pipe has 220mm width and 10mm height) for 0.2kg/s level.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.781-786
• /
• 2017

This study aims to acquire a basic clustering technology of hybrid rocket motor for lunar lander, including the oxidizer flow distribution characteristic and the simultaneous ignition characteristic. The experimental setups were established to conduct a series of ground firing test of a clustered motor. The gaseous oxygen (GOX) and the HDPE (High Density PolyEthylene) were used as the oxidizer and the solid fuel, respectively. Experimental results which are the simultaneous pyrotechnic ignition characteristic, the oxidizer distribution characteristic and the pressure traces of each combustion chamber imply that the hybrid rocket clustered motor works successfully.