• Clinics in Shoulder and Elbow
• /
• v.12 no.1
• /
• pp.7-13
• /
• 2009

Purpose: To evaluate the clinical and radiological results of arthroscopic tuberoplasty for irreparable massive rotator cuff tears. Materials and Methods: Eleven patients underwent arthroscopic tuberoplasty for irreparable massive rotator cuff tears between December 2004 and April 2007. The mean follow-up period was 17.3 months, and the average age at the time of surgery was 61.7-year-old. Five cases underwent arthroscopic tuberoplasty and 6 cases had arthroscopic subacromial decompression and tuberoplasty, simultaneously. Results: The average Constant score improved from 61.8 to 86.9 and the average UCLA score changed from 14.8 to 31.8 with 6 excellent, 3 good and 2 poor results (p=0.003). The active forward flexion improved from $111.8^{\circ}$ to $154.1^{\circ}$(p=0.011). The acromiohumeral interval increased from 3.94 mm preoperatively to 4.22 mm postoperatively (p=0.12). In the poor UCLA score group, the acromiohumeral interval changed from 1.67 mm preoperatively to 0.94 mm postoperatively. Conclusion: Arthroscopic tuberoplasty may be a second option to relieve the pain of irreparable massive rotator cuff tears and improve the range of motion. However, good results could not be expected if the acromiohumeral interval is < 2 mm preoperatively and decreased postoperatively.

• Clinics in Shoulder and Elbow
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2009

Purpose: To evaluate and report the clinical and radiological outcomes of open reduction and internal fixation with a mini-T plate for unstable distal clavicle fractures. Materials and Methods: From December 2004 to July 2007, fifteen patients who had a fracture of the distal clavicle (Neer type II fracture) were treated with an open reduction and internal fixation using a mini-T plate. They were followed up for a minimum of one year and the clinical and radiological results were analyzed. Results: The average time to fracture union was 3.1(3~4) months. There were no complications, such as deep infection or fixation loss. The mean ASES score was 97 points (85~100points) at the last follow up period, and 14 patients had a full range of motion of the shoulder. Conclusion: Open reduction and internal fixation with a mini-T plate for unstable distal clavicle fracture is a good surgical method with good clinical and radiological results.

• Clinics in Shoulder and Elbow
• /
• v.17 no.2
• /
• pp.68-76
• /
• 2014

Background: Recently, reverse total shoulder arthroplasty (RTSA) has been accepted as a main treatment option in irreparable massive rotator cuff tear with cuff arthropathy. The purpose of this study was to evaluate the early complication incidence and the preliminary clinical results of RTSAs performed in single institute. Methods: Fifty-seven RTSAs (56 patients) were performed between April 2011 and March 2013. The indications for RTSA were cuff tear arthropathy and irreparable massive rotator cuff tear with or without pseudoparalysis. Exclusion criteria were revision, preoperative infections and fractures. At final follow-up, 45 shoulders were enrolled. Mean follow-up duration was 12.5 months (range, 6-27 months). The mean age at the time of surgery was 73.6 years (range, 58-87 years). All the patients were functionally accessed via Constant score, American Shoulder and Elbow Surgeons (ASES) score, pain and functional visual analogue scale (VAS) scores and active range of motion. Complications were documented as major and minor. Major complications include fractures, infections, dislocations, nerve palsies, aseptic loosening of humeral or glenoid components, or glenoid screw problems. Minor complications include radiographic scapular notching, hematomas, heterotopic ossification, algodystrophy, intraoperative dislocations, intraoperative cement extravasation, or radiographic lucent lines of the glenoid. Results: The mean Constant score increased from 31.4 to 53.8 (p < 0.001). The pain and functional VAS scores improved (5.2 to 2.7, p < 0.001, 4.0 to 6.7, p < 0.001) and active forward flexion improved from $96.9^{\circ}$ to $125.6^{\circ}$ (p = 0.011). One or more complications occurred in 16 (35.6%) of 45 shoulders, with one failure (2.2%) resulting in the removal of implants by late infection. The single most common complication was scapular notching (9 [20%]). There were 4 (8.9%) axillary nerve palsies postoperatively (n=3: transient n. palsy, n=1: Symptom existed at 11 months postoperatively but improving). Conclusions: In a sort term follow-up, RTSA provided substantial gain in overall function. Most common early complications were scapular notching and postoperative neuropathy. Although overall early complication rate was as high as reported by several authors, most of the complications can be observable without compromise to patients' clinical outcome. Long term follow-up is required to clarify the clinical result and overall complication rate.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.209-218
• /
• 2005

Consciously or not, producers have to make many aesthetic choices in creative process of video production. If there are general acceptable aesthetic principles to make right choice it would be guideline of aesthetic decision to somewhat reduce mistakes and errors in the process. This paper proposes a theoretical approach on establishing the media aesthetic principle of 3D animation camera working, which is the most suitable for animation production context. We describe the Herbert Zettl's applied media aesthetics related directly to the camera, which is about the two-Dimensional field focusing on aspect radio and forces within the screen, three-dimensional field focusing on depth, volume, and four-dimensional field focusing on time and motion. In order to have theoretical approach we made an analysis on comparing a camera working of movie with 3D computer animation's one, and reconstructed these basic principles to be suited for the 3D animation production. When applied media aesthetics of the traditional camera working are applied to the 3D animation production, it could be an efficient guideline for it. Futhermore, if we develop the research for the relationship with various visual languages with the basis of these principles, the theory of creative picture composition method for the 3D animation production will be logically and systematically established.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.84-87
• /
• 1996

We have been developed electrohydraulic left ventricular assist device and done various in vivo evaluation on the device. Through the in vivo experiment conducted from Jan. 23, 1996 to Feb. 8, we could have experience of long-term evaluation fur the first time. The sheep used in this experiment had survived for 16 days. We used new actuator with reduced size and linear motion guide replacing oil box and ball bearings. Also, we used improved blood chamber with reduced size, reduced weight facilitating fixing the chamber to animal's body, and polymer sac having improved folding pattern. Against suction problem, we used absolute pressure limiter only. Motor current for driving this new actuator was not much higher than older one. Effective stroke volume was about 48 cc. Thrombosis was found around top area and peripheral boundary of the sac and valves. There was no sign of damage from suction problem in the atrium observed at autopsy. Main cause of death was presumed to be progressive formation of thrombosis in the cannulae. In this paper, the results of this experiment are documented.

• Journal of Biomedical Engineering Research
• /
• v.35 no.5
• /
• pp.125-131
• /
• 2014

The purpose of this study is to verify the utility of reflected photoplethysmography sensor using two green light emitting diodes that influenced by ambient light. Recently it has been studied that green light emitting diode is suitable for light source of reflected photoplethysmography sensor at low temperature and high temperature. Another study showed that, green light is better for monitoring heart rate during motion than led light. However, it has a bad characteristic about ambient light noise. To verify the utility of reflected photoplethysmography sensor using green light emitting diode, this study measures the photoplethysmography signal that is distorted by ambient light and will propose a solution. This study has two parts of research method. One is measurement system that composed sensor and board. The sensor is made up PE-foam and Non-woven fabric for flexible sensor. The photoplethysmography signal is measured by measurement board that composed high-pass filter, low-pass filter and amplifier. Ambient light source is light bulb and white light emitting diode that has three steps brightness. Photoplethysmography signal is measured with lead II electrocardiography signal at the same time and it is measured at the finger and radial artery for 1 minute, 1000 Hz sampling rate. The lead II electrocardiography signal is a standard signal for heart rate and photoplethysmography signal that measured at the finger is a standard signal for waveform. The test is repeated 3 times using three sensor. The data is processed by MATLAB to verify the utility by comparing the correlation coefficient score and heart rate. The photoplethysmography sensor using two green light emitting diodes is shown better utility than using one green light emitting diode and red light emitting diode at the ambient light. The waveform and heart rate that measured by two green light emitting diodes are more identical than others. The amount of electricity used is less than red light emitting diode and error peak detectability factor is the lowest.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.2
• /
• pp.171-186
• /
• 2009

Various Earth-Moon transfer trajectories are designed and analyzed to prepare the future Korea's Lunar missions. Minimum fuel trajectory solutions are obtained for the departure year of 2017, 2020, 2022, and every required mission phases are analyzed from Earth departure to the final lunar mission orbit. N-body equations of motion are formulated which include the gravitational effect of the Sun, Earth and Moon. In addition, accelerations due to geopotential harmonics, Lunar J2 and solar radiation pressures are considered. Impulsive high thrust is assumed as the main thrusting method of spacecraft with launcher capability of KSLV-2 which is planned to be developed. For the method of injecting a spacecraft into a trans Lunar trajectory, both direct shooting from circular parking orbit and shooting from the multiple elliptical intermediate orbits are adapted, and their design results are compared and analyzed. In addition, spacecraft's visibility from Deajeon ground station are constrained to see how they affect the magnitude of TLI(Trans Lunar Injection) maneuver. The results presented in this paper includes launch opportunities, required optimal maneuver characteristics for each mission phase as well as the trajectory characteristics and numerous related parameters. It is confirmed that the final mass of Korean lunar explorer strongly depends onto the initial parking orbit's altitude and launcher's capability, rather than mission start time.

• Journal of Navigation and Port Research
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2018

This study covers the selection of systems measuring the behaviour of the slender structure in the underwater environment and its performance assessment. From a comparison of an instrumentation system that can measure the continuous behaviour along the entire length of the slender structure, the underwater camera system is finally selected as the most appropriate semi-permanent measurement system for Deep-sea Ocean Engineering Basin of KRISO. An experiment on the rigid pipes for a basic performance evaluation of the underwater camera is conducted in this study. The motion of a top excited rigid pipe is measured with the utilization of the underwater camera system. The performance of the underwater camera is evaluated by comparing the movement of a pipe measured by the underwater camera with the measured input signals. Through the top excitation experiment for the slender structure, the real-time three-dimensional measurement of the underwater camera system is qualitatively evaluated in this case. The developed underwater camera system can apply to the system to measure dynamic behaviour of a slender structure and mooring line in Deep Ocean Engineering Basin.

• The KIPS Transactions:PartB
• /
• v.10B no.1
• /
• pp.95-102
• /
• 2003

In surveillance video system, there are many classes of images and some spatial regions are more important than other regions. The conventional compression method in this system have been compressed there full frames without classfying them depend on their important parts. To improve the accuracy of the image coding and deliver effective compression for the surveillance video system, it was necessary to separate the regions according to their importance. In this paper, we propose a new effective surveillance video image compression method. The proposed scheme defines importance based three-level region of interest block in a frame, such as background, motion object block, and the feature object block. A captured video image frame can be separated to these three different levels of block regions. And depends on the priority, each block can be modified and compressed in different resolution, compression ratio and qualify factor. Therefore, in surveillance video system, this algorithm not only reduces the image processing time and space, but also guarantees the Important image data in high quality to acquire the system's goal.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.396-399
• /
• 2010

Purpose: In hand injury, pedicle is usually damaged by avulsion injury or crushing injury. Because of postoperative pedicle obliteration, it is often hard to save the injured hand and fingers, even after successful replantation. The author introduces three cases of extensive hand injury, and successful results after applicatoin of multiple venous grafts to these patients. Methods: In all cases there was no circulation in any finger. In the first case, some vessels were extracted, so venous graft was applied to two sites of severely damaged venous sites. In the second case, venous grafts were applied to all four digital arteries of all fingers except thumb which got severely crushed, and two sites of dorsal veins. In the third case, venous graft was applied to all four digital arteries of all five fingers, and two sites of dorsal veins and palmar veins each. Results: In all cases, survival of hands and fingers was successful. In the second case, however, amputation in thumb and little finger at DIP joint level was inevitable, because of its severe damage, and the large dorsal defect on index finger was filled with DIEP free flap. Thumb was reconstructed with toe-to-thumb free flap, and additional debulking procedures and contracture release is furtherly needed. In the first case, additional surgery was done, as FDP tendon got re-ruptured, but in long term follow-up, satisfactory range of motion was attained. In the third case, FTSG on dorsal skin region was planned. as flap on dorsal area got partial necrosis. Conclusion: In hand injury, there are many structures to be repaired, but sometimes venous graft is avoided for its long operating time. Even though the length of damaged vessel is enough for anastomosis, the endothelium is often damaged (zone of injury). In extensive hand injury, successful reconstruction would be possible with active venous graft to all vessels suspicious for damage.