• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1832-1835
• /
• 2005

This paper presents the steering control algorithm of an up and down motion robot using a quaternion. The up and down motion robot is to be moved on an irregular floor that can inevitably result in the errors of both position and orientation. Especially the orientation error should be compensated every work in order to adjust the misaligned values of current orientation to those commanded values. In this paper, we propose a new steering control algorithm between the two values by using a quaternion with spherical cubic interpolation. The proposed algorithm is shown to be effective in terms of vibration when compared to a conventional simple compensation without interpolation, by using $MATLAB^{(R)}$ and $VisualNastran4D^{(R)}$

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1912-1920
• /
• 1999

In this paper, we propose a layered video coding scheme which can generate multi-layered bitstream for heterogeneous environments. A new motion prediction structure with temporal hierarchy of frames is developed to afford temporal resolution scalability and the wavelet decomposition is adopted to offer spatial acalability. The proposed scheme can have a higher compression ratio than replenishment schemes by using motion estimation and compensation which can further reduce the temporal redundancy, and it effectively works with dynamic adaption or errors using dispersive intra-subband update (DISU). Moreover, data rate scalability can be attained by employing embeded zerotree wavelet (EZW) technique which can produce embeded bitstream. Therefore, the proposed scheme is expected to be effectively used in heterogeneous environments such as the Internet, ATM, and mobile networks where interoperability are required.

• Journal of Information Processing Systems
• /
• v.6 no.3
• /
• pp.347-358
• /
• 2010

This paper presents a measurement system for 3D hand-drawn gesture motion. Many pen-type input devices with Inertial Measurement Units (IMU) have been developed to estimate 3D hand-drawn gesture using the measured acceleration and/or the angular velocity of the device. The crucial procedure in developing these devices is to measure and to analyze their motion or trajectory. In order to verify the trajectory estimated by an IMU-based input device, it is necessary to compare the estimated trajectory to the real trajectory. For measuring the real trajectory of the pen-type device, a PHANToMTM haptic device is utilized because it allows us to measure the 3D motion of the object in real-time. Even though the PHANToMTM measures the position of the hand gesture well, poor initialization may produce a large amount of error. Therefore, this paper proposes a calibration method which can minimize measurement errors.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.604-609
• /
• 2005

This paper presents an experimental study for optimizing the acceleration of AC servomotor using finite jerk (the first derivative of acceleration). The acceleration optimization with finite jerk aims at generating the smooth velocity profile of AC servomotor by experimentally minimizing vibration resulted from the initial friction of servomotor. The stick-slip motion of AC servomotor induced by initial friction can result in the positional errors that are not good for high-precision devices such as the assembly robot arms to be used in a 300mm wafer or a LCD (Liquid Crystal Display) stocker system. In this paper, experiments were made by using a PM (Permanent Magnet) type AC servomotor with MMC(R) (Multi Motion Controller) programmed in Visual C++(R). The experiments have been performed for finding the optimal duration time of finite jerk in terms of the minimization of vibration displacements when both the magnitude of velocity and the allowable acceleration are given. We have compared the proposed control with the conventional control with trapezoidal velocity profile by measuring vibration displacements. The effectiveness of the proposed control has been verified in that the experimental results showed the decrease of vibration displacement by about 24%.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.1
• /
• pp.94-100
• /
• 2014

In order to intercept anti-ship missiles, it is important to accurately predict the aiming point. The major factor for degrading the accuracy of the aiming point is the motions of the warships due to waves. Therefore, a stage of correcting the aiming point is required to compensate for such motions of warships. The proposed aiming point correction technique treats the changes in positions and velocity of naval guns by considering changes in the positions and velocities of the anti-ship missiles. In this paper, a ship motion estimation filter was also constructed to predict the motions of warships at the firing time of naval guns. In the simulation part, finally, the distance errors before and after aiming point corrections were compared through 6-DOF simulations.

• Journal of Mechanical Science and Technology
• /
• v.15 no.3
• /
• pp.300-308
• /
• 2001

Tracking of moving objects within video streams is a complex and time-consuming process. Large number of moving objects increases the time for computation of tracking the moving objects. Because of large computations, there are real-time processing problems in tracking of moving objects. Also, the change of environment causes errors in estimation of tracking information. In this paper, we present a new method for tracking of moving objects using optical flow motion analysis. Optical flow represents an important family of visual information processing techniques in computer vision. Segmenting an optical flow field into coherent motion groups and estimating each underlying motion are very challenging tasks when the optical flow field is projected from a scene of several moving objects independently. The problem is further complicated if the optical flow data are noisy and partially incorrect. Optical flow estimation based on regulation method is an iterative method, which is very sensitive to the noisy data. So we used the Combinatorial Hough Transform (CHT) and Voting Accumulation for finding the optimal constraint lines. To decrease the operation time, we used logical operations. Optical flow vectors of moving objects are extracted, and the moving information of objects is computed from the extracted optical flow vectors. The simulation results on the noisy test images show that the proposed method finds better flow vectors and more correctly estimates the moving information of objects in the real time video streams.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2006

To reduce the complexity of video transcoder, transcoding techniques generally use intermediate data such as macroblock types, motion vectors, DCT coefficients, which are extracted from incoming video bitstream. In this Paper, we Propose a new adaptive INTRA update scheme utilizing the importance of each macroblock in a given frame. The importance measure is calculated from the motion vectors which are extracted from the decoding procedure of a incomming video data.'rho ratio of the macroblock to be referred by the next frame is calculated by the motion vectors of the next frame and the macroblocks to be refered higher ratio has more effect on the next frame and the followed frames. The proposed scheme can obtain transcoded bitstreams which has better image quality and more improved resilience against transmission errors.

• The KSFM Journal of Fluid Machinery
• /
• v.20 no.1
• /
• pp.59-64
• /
• 2017

Diverter is an essential element in gravimetric calibration method of flowmeter. Error of diverter are influenced by flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location. That's why, time detection position of diverter is tuned through repetitive test for minimizing error of diverter. Further the diverter must be compared with the other institutions test since the influence on the accuracy of the flow meter used in the test. In this paper, errors (flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location) of diverter are decreased by produced uni-direction diverter and error of gravimetric calibration system is decreased. Uni-direction diverter is calibrated by gravimetric calibration system with precision flowmeter, the flowmeter is calibrated by pipe prover and other institutions and uni-direction diverter is evaluated. Uni-direction diverter is not influenced by flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location. As a result, Uni-direction diverter can calibrate in wider scope since increasing ratio of maximum and minimum flow rate of uni-direction diverter.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.190-198
• /
• 2012

An adaptive correlation noise model (CNM) construction algorithm is proposed in this paper to increase the efficiency of parity bits for correcting errors of the side information in transform domain Wyner-Ziv (WZ) video coding. The proposed algorithm introduces two techniques to improve the accuracy of the CNM. First, it calculates the mean of direct current (DC) coefficients of the original WZ frame at the encoder and uses it to assist the decoder to calculate the CNM parameters. Second, by considering the statistical property of the transform domain correlation noise and the motion characteristic of the frame, the algorithm adaptively models the DC coefficients of the correlation noise with the Gaussian distribution for the low motion frames and the Laplacian distribution for the high motion frames, respectively. With these techniques, the proposed algorithm is able to make a more accurate approximation to the real distribution of the correlation noise at the expense of a very slight increment to the coding complexity. The simulation results show that the proposed algorithm can improve the average peak signal-to-noise ratio of the decoded WZ frames by 0.5 dB to 1.5 dB.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.4
• /
• pp.102-111
• /
• 1994

This article deals with the problem of designing a robust algorithm for the motion control of robot manipulator whose nonlinear dynamics contain various uncertainties. To ensure high performance of control system, a model-based feedforward compensation with continuous robust control has been developed. The control structure based on the deterministic approach consists of two parts : the nominal control law is first introduced to stabilize the system without uncertainties, then a robust nonlinear control law is adopted to compensate for both the resulting errors(or structured uncertainties) and unstructured uncertainties. The uncertainties assumed in this study are bounded by polynomials in the Euclidean norms of system states with known bounding coefficients. The presented control scheme is relatively simple as well as computationally efficient. With a feasible class of desired trajectories, the proposed control law provides sufficient criteria which guarantee that all possible responses of the closed-loop system are uniformly ultimately bounded in the presence of uncertainties. Therefore, the control algorithm proposed is shown to be robust with respect to the involved uncertainties.