• 소음진동
• /
• 제7권5호
• /
• pp.773-780
• /
• 1997

Using Generalized Inverse Method presented by Udwadia and Kalaba in 1992, we can obtain equations to exactly describe the motion of constrained systems. When the differential equations are numerically integrated by any numerical integration scheme, the numerical results are generally found to veer away from satisfying constraint equations. Thus, this paper deals with the numerical integration of the differential equations describing constrained systems. Based on Baumgarte method, we propose numerical methods for reducing the errors in the satisfaction of the constraints.

• 대한방사선치료학회지
• /
• 제26권2호
• /
• pp.247-256
• /
• 2014

목 적 : 췌장 환자 방사선 치료 중 기점(Fiducial) 대상 내부 및 외부 종양 움직임의 오차를 정량화 하고자 한다. 또한 cone beam computed tomography (CBCT) 를 기반으로 호흡 시 췌장의 움직임 분석하고자 한다. 대상 및 방법 : 용적 세기변조 회전조사 (V-MAT)를 적용, 정위적 방사선 치료를 국소 진행성 췌장암 환자 11명을 대상으로 하였다. CBCT 및 직교 투시이미지를 적용하여 기점(Fiducial Marker)의 Inter, intra-fraction 움직임 변화를 치료 전, 치료 진행 시 분석하였다. 결 과 : 치료 후 프로토콜을 오프라인 교정 프로토콜을 사용하여, CBCT 와 직교투시 간의 평균 오차(범위)는 0.0(-1.7~4.0), 0.3(-0.5~3.0) and 0.0(-4.1~6.6)mm 측방 (LR), 세로 (AP) 및 종 방향 (SI) 이였다. 무작위 Inter-fraction Setup 오차 결과는 -0.1, -2.3 and -1.1 mm: 95% Fiducial포함 마진은 각 9.9, 7.8, 12.5mm로 수식되었다. 결 론 : 위 분석으로 뼈 일치 정렬 후 잔류 불확실성이 있으며, SI 방향에 큰 임의의 움직임은 적합한 여백이 필요하다. 주변 내부 장기를 보호, 내부 장기 문제점을 최소화, 호흡편차를 고려, 치료 시 정기적으로 측정하여야 한다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.141-148
• /
• 2003

This paper presents a rotating ann test for assessment of an underwater hybrid navigation system for a semi-autonomous underwater vehicle. The navigation system consists of an inertial measurement unit (IMU), an ultra-short baseline (USBL) acoustic navigation sensor and a doppler velocity log (DVL) accompanying a magnetic compass. The errors of inertial measurement units increase with time due to the bias errors of gyros and accelerometers. A navigational system model is derived to include the error model of the USBL acoustic navigation sensor and the scale effect and bias errors of the DVL, of which the state equation composed of the navigation states and sensor parameters is 25 in the order. The conventional extended Kalman filter was used to propagate the error covariance, update the measurement errors and correct the state equation when the measurements are available. The rotating ann tests are conducted in the Ocean Engineering Basin of KRISO, KORDI to generate circular motion in laboratory, where the USBL system was absent in the basin. The hybrid underwater navigation system shows good tracking performance against the circular planar motion. Additionally this paper checked the effects of the sampling ratio of the navigation system and the possibility of the dead reckoning with the DVL and the magnetic compass to estimate the position of the vehicle.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권1호
• /
• pp.16-21
• /
• 2015

Most video services are transmitted in wireless networks. In a network environment, a packet of video is likely to be lost during transmission. For this reason, numerous error concealment (EC) algorithms have been proposed to combat channel errors. On the other hand, most existing algorithms cannot conceal the whole missing frame effectively. To resolve this problem, this paper proposes a new Adaptive Prediction Unit-based Motion Vector Extrapolation (APMVE) algorithm to restore the entire missing frame encoded by High Efficiency Video Coding (HEVC). In each missing HEVC frame, it uses the prediction unit (PU) information of the previous frame to adaptively decide the size of a basic unit for error concealment and to provide a more accurate estimation for the motion vector in that basic unit than can be achieved by any other conventional method. The simulation results showed that it is highly effective and significantly outperforms other existing frame recovery methods in terms of both objective and subjective quality.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.488-491
• /
• 2003

A motion compression method by min s-norm composite fuzzy relational equations (dual-MCF) is proposed, where a motion sequence is divided into intra-pictures (I-pictures) and predictive-pictures (P-pictures). The I-pictures and the P-pictures are compressed by using uniform coders and non-uniform coders, respectively. A design method of non-uniform coders is proposed to perform an efficient compression and reconstruction of the P-pictures, based on the dual overlap level of fuzzy sets and a fuzzy equalization. An experiment using 10 P-pictures confirms that the root means square errors of the proposed method is decreased to 82.9％ of that of the uniform coders, under the condition that the compression rate is 0.0055. An experiment of motion compression and reconstruction is also presented to confirm the effectiveness of the dual-MCF based on the non-uniform coders.

• 한국소음진동공학회논문집
• /
• 제14권1호
• /
• pp.10-16
• /
• 2004

There are a lot of roots of errors in a motion of the optical pick-up actuator being one of the most significantcomponents in a CD-ROM drive. Most of the studios recently performed have a tendency to seek for the causes from an actuator itself. This paper presents dynamic characteristics of an actuator affected by the motion of a feeding deck. The feeding system is modeled as a rigid body with eight degree-of-freedom. Using Largrange's equation, we derive linear equations of motion with respect to the rectangular coordinate. We found that the ranges of the natural frequencies of a feeding deck and the actuator are close to each other. The time responses are also computed by the Newmark method and Runge-Kutta method. The result show that it is important effect to consider feeding deck in modeling and designing an optical pick-up.

• 소음진동
• /
• 제6권5호
• /
• pp.567-574
• /
• 1996

This paper concerns an articulated space robot with flexible links. The equations of its motion are derived by means of the Lagrangian mechanics. Assuming that magnitude of elastic motions are relatively small, the perturbation approach is taken to separate the original equations of motion into linear and nonlinear equations. Th effect the desired payload motion, open loop control inputs are first determined based on the nonlinear equations. One the other hand, in order to reduce the positional errors during the maneuver, vibration suppression is actively done with a feedforward control for disturbance cancellation to some extent. Additionally, for performance robustness against residual disturbance, an LQ control modified to have a prescribed degree of stability is applied based on the linear equations. Measurement equations are formulated to be used for the maximum likelihood estimator to reconstruct states from the original robot equations of motion. Finally, numerical simulations show effectiveness of the proposed control design scheme.

• 로봇학회논문지
• /
• 제9권4호
• /
• pp.197-205
• /
• 2014

As computer vision algorithms are developed on a continuous basis, the visual information from vision sensors has been widely used in the context of simultaneous localization and mapping (SLAM), called visual SLAM, which utilizes relative motion information between images. This research addresses a visual SLAM framework for online localization and mapping in an unstructured seabed environment that can be applied to a low-cost unmanned underwater vehicle equipped with a single monocular camera as a major measurement sensor. Typically, an image motion model with a predefined dimensionality can be corrupted by errors due to the violation of the model assumptions, which may lead to performance degradation of the visual SLAM estimation. To deal with the erroneous image motion model, this study employs a local bundle optimization (LBO) scheme when a closed loop is detected. The results of comparison between visual SLAM estimation with LBO and the other case are presented to validate the effectiveness of the proposed methodology.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.177.3-177
• /
• 2001

In this paper, the design of the in-motion alignment system of Strapdown Inertial Navigation System(SDINS) using Robust Extended Kalman Filter(REKF) is presented. The compensation of errors in the aided navigation system is accomplished by the indirect feedback filtering. The performance of the aided navigation algorithm is very sensitive to the accuracy of the initial estimate, which is the characteristic of the EKF. Unfortunately, the initial attitude error can be very large during the in-motion alignment. To overcome the in-motion alignment under large initial attitude error problem, the REKF using linear robust filtering technique is proposed. The linear robust H$_2$ filter can be adopted for nonlinear ...

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.112-118
• /
• 2007

Recently, the machine tools called multi-task machines, which mounted rotary axes on the table or spindle are used increasingly. Accordingly, multi-task machine tool takes a growing interest on the motion accuracy of feed drive system. In this study, measurement and diagnosis of motion errors ware attempted from circular pattern obtained by using DBB (Double ball bar) device. Those were obtained at both clockwise and counter clockwise motions in mutually perpendicularly intersecting three planes. The reliability of error measurement system for multi-task machine tool was verified by the direct test cutting.