• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.3
• /
• pp.533-540
• /
• 2019

This study investigated the effect of extracorporeal shock wave therapy on nerve regeneration in nerve injured rats. In this study, we used 30 male Sprague-Dawley rats weighing 230-280g and 6 weeks old. Study groups were divided into two groups using a random sampling method: experimental group (n=15) treated with extracorporeal shock wave after sciatic nerve injury and control group (n=15) treated without extracorporeal shock wave after sciatic nerve injury. In this study, extracorporeal shock wave therapy equipment (OPTIMUS, SALUS TALENT 3, Korea) was used to apply extracorporeal shock wave therapy and applied to the sciatic nerve crush area of the right hind limb using low intensity. We measured the stance time and stride distance of the affected side using dartfish software. There was a statistically significant difference in the change of stance time and stride distance of the affected side between the experimental group using extracorporeal shock wave therapy and the control group without extracorporeal shock wave treatment. In conclusion, extracorporeal shock wave therapy has a positive effect on nerve regeneration.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1089-1094
• /
• 2022

In this paper, a human coexistence-type companion robot that can communicate with people in daily life and alleviate the gap in care personnel was studied. Based on the voice recognition module, servo motor, and Arduino board, a companion robot equipped with a robot arm control function using voice recognition, a position movement function using RC cars, and a voice recognition function was tested and manufactured. As a result of the experiment, the speech recognition experiment according to distance showed the optimal recognition rate at a distance of 5 to 30 cm, and the speech recognition experiment according to gender showed a higher recognition rate in the first tone, monotonous tone. Through the evaluation results of these motion experiments, it was confirmed that a companion robot could be made.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.3
• /
• pp.230-240
• /
• 2022

In general, a high tension on the anchor and chain is placed when a ship at anchor is subjected to heavy weather. Mariners have to pay attention to whether dragging anchor occurs to keep the safety of the ship at anchorage since it is difficult to maintain the stable motion of ship and it causes collisions with other ships nearby. In this paper, the ship motion against the external forces was shown to obtain the fundamental data about characteristic of holding power due to nature of seabed at anchor, so practical trials were carried out in rocky area and muddy area using a trial ship around coastal area of South Korea. In muddy seabed, holding power showed reasonable tension values depending on the distance from anchor position of continuing swing motions of a ship corresponding to wind force. Meanwhile in rocky seabed, tension values on the chain appeared very high occasionally regardless of the distance from the anchor position and seemed to exceed its holding power to be the breaking strain of the chain although weather was not in a severe condition. Therefore, some of the cables laid on the seabed were presumed to be caught in a crack on the rock. It is assumed that even a small amount of external force may cause the chain to break in a moment in rocky seabed. Additionally, wind and current forces had a somewhat contradictory effect on holding power of the ship between them.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.587-588
• /
• 2022

In this paper, we propose a rigid body tracking method in 3D space using 2D passive marker images from multiple motion capture cameras. First, a calibration process using a chess board is performed to obtain the internal variables of individual cameras, and in the second calibration process, the triangular structure with three markers is moved so that all cameras can observe it, and then the accumulated data for each frame is calculated. Correction and update of relative position information between cameras. After that, the three-dimensional coordinates of the three markers were restored through the process of converting the coordinate system of each camera into the 3D world coordinate system, the distance between each marker was calculated, and the difference with the actual distance was compared. As a result, an error within an average of 2mm was measured.

• Clinics in Shoulder and Elbow
• /
• v.26 no.4
• /
• pp.373-379
• /
• 2023

Background: The purpose of this study was to determine the association between smoking and clinical outcomes of hook plate fixation for acute acromioclavicular (AC) joint injuries. Methods: This study retrospectively investigated 82 patients who underwent hook plate fixation for acute AC joint dislocation between March 2014 to June 2022. The patients were grouped by smoking status, with 49 in group N (nonsmokers) and 33 in group S (smokers). Functional scores and active range of motion were compared among the groups at the 1-year follow-up. Coracoclavicular distance (CCD) was measured, and difference with the uninjured side was compared at initial injury and 6 months after implant removal. Results: No significant differences were observed between the two groups in demographic factors such as age and sex, as well as parameters related to initial injury status, which included time from injury to surgery, the preoperative CCD difference value, and the Rockwood classification. However, the postoperative CCD difference was significantly higher in group S (3.1±2.6 mm) compared to group N (1.7±2.4 mm). Multivariate regression analysis indicated that smoking and the preoperative CCD difference independently contributed to an increase in the postoperative CCD difference. Despite the radiographic differences, the postoperative clinical outcome scores and active range of motion measurements were comparable between the groups. Conclusions: Smoking had a detrimental impact on ligament healing after hook plate fixation for acute AC joint dislocations. This finding emphasizes the importance of smoking cessation to optimize reduction maintenance after AC joint injury. Level of evidence: III.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.165-170
• /
• 2014

The resistance to motion of the Korean next-generation high-speed train (HEUM-430X) was assessed on the basis of 12 coasting test runs at coasting speeds up to approximately 380km/h. Two different methods, a linear regression method and a time-integral method, were employed to calculate decelerations from the time-velocity data and the time-distance data, respectively, and an equation of resistance to motion was devised from the deceleration data calculated at each time section. The effect of an improvement of the aerodynamic shape on the resistance to motion was investigated, with the results showing that the running resistance was reduced by about 15% due to these improvements. An increase of approximately 28% of the running resistance was also noted when running in a tunnel relative to running through an open field.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.4
• /
• pp.868-878
• /
• 1998

There are recently increasing needs for precision XYZ-stage in the fields of nanotechnology, specially in AFMs(Atomic Force Microscope) and STMs(Scanning Tunneling Microscope). Force measurements are made in the AFM by monitoring the deflection of a flexible element (usually a cantilever) in response to the interaction force between the probe tip and the sample and controlling the force neasyred constant topography can be obtained. The power of the STM is based on the strong distance dependence of the tunneling current in the vacuum chamber and the current is a feedback for the tip to trace the surface topography. Therefore, it is required for XYZ-stage to position samples with nanometer resolution, without any crosscouples and any parasitic motion and with fast response. Nanometer resolution is essential to investigate topography with reasonable shape. No crosscouples and parasitic motion is essential to investigate topography without any shape distortion. Fast response is essential to investigate topography without any undesirable interaction between the probe tip and sample surface ; sample scratch. To satisfy these requirements, this paper presents a novel XYZ-stage concept, it is actuated by PZT and has a monolithic flexible body that is made symmetric as possible to guide the motion of the moving body linearly. PZT actuators have a very fast response and infinite resolution. Due to the monolithic structure, this XYZ-stage has no crosscouples and by symmetry it has no parasitic motion. Analytical modeling of this XYZ-stage and its verification by FEM modeling are performed and optimal design that is to maximize 1st natural frequencies of the stage is also presented and with that design values stage is manufactured.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.92-101
• /
• 2005

It is difficult to detect the accurate detection which leads the camera it moves follows in change of the noise or illumination and Also, it could be recognized with backgound if the object doesn't move during hours. In this paper, the proposed method is updating changed background image as much as N＊M pixel mask as time goes on after get a difference between imput image and first background image. And checking image pixel can efficiently detect moving by computing fixed distance pixel instead of operate all pixel. Also, set up minimum area of object to use boundary point of object abstracted through checking image pixel and motion detect of object. Therefore motion detection is available as is fast and correct without doing checking image pixel every Dame. From experiment, the designed and implemented system showed high precision ratio in performance assessment more than 90 percents.

• Korean Journal of Rural Living Science
• /
• v.5 no.2
• /
• pp.93-106
• /
• 1994

The purpose of this study was to develop the pattern of bodysuit and to identify the wear fitness of it The methods of statistical analysis applied to the study were ANOVA and cluster analysis. The materials used in making bodysuit were Nylon/Polyurethane, lace, power net, binding tape, and hook eye. The try-on test was administered in two aspects ; (1) the comparison of anthropometric data before and after trying on the experimentally constructed bodysuit with those of marketing bodysuit, (2) the sensory evaluation to estimate the wear fitness in terms of appearance and motion function. The conclusions obtained are as follows ; 1. In the survey of wearing state, 52.2% of respondents had experience of wearing bodysuit. 60.6% of them responded to the item, “well-balanced body” in the question about the purpose of wearing it. 55.7% considered the item, “feel choky in the chest” as uncomfortable point in putting on bodysuit. 48.3% felt the portion of crotch drawn above in taking exercise or behaving routinely in everyday life. 2. As for the characteristics of the bodysuit design, the scooped neckline and horizontal outline without wire in lower bust was used, the adjust point being located right above the perineum point, and the length of bodysuit is as far as trochanteric point. 3. In comparing anthropometric data of the subjects, there was significant difference in the height of lower bust the distance around abdomen, and the length of bust point(right, left) between the experimentally constructed bodysuit and the marketing bodysuit. 4. Concerning the results of the try-on test in appearance, the estimates of expert panel, which were in agreement with those of subjects in mean value and composite reliability coefficient, showed that the pattern fitness of experimentally designed bodysuit was higher than that of marketing bodysuit. 5. To take try-on test in motion function, motion was classified the five steps. The results of the test showed that experimentally designed bodysuit was fitter in each steps of motion than marketing bodysuit.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.21-30
• /
• 1990

This paper describes a hardware implementation of the interframe monochrome video CODEC using a MC-CVQ(Motion Compensated and Classified Vector Quantization) algorithm. The specifications of this CODEC are (1) the resolution of image is $128{\times}128$ pixels, and (2) the transmission rates are about 10frames/sec at the 64Kbps channel. In order to design the CODEC under these conditions, it is implemented by a multiprocessor system composed of MC unit, CVQ nuit and decoder unit, which are controlled by microprogramming technique. And the 3~stage pipelined ALU(Arithmetic and Logic Unit) is adopted to calculate the minimum error distance in the MC unit and CVQ nuit. The realized system shows that the transmission rates are 6-15 frames/sec according to the relative motion of the video signal.