• Korean Journal of Applied Biomechanics
• /
• v.19 no.4
• /
• pp.719-728
• /
• 2009

In this study, a training program was conducted to improve the performance of the basic movement of the basket-to-handstand mount. After completion of the training program, the kinematic comparison of the before and after effects were investigated to provide scientific data about this technique. It is recommended that during P1, the center of body mass at the back should push the hip joint to flex quickly, and the shoulder joint should be maintained at a maximum angle. During P2, the body's center of mass must be accelerated so as to create enough momentum to rise efficiently for this, quick extension of both the hip and the shoulder is required. For safety during P3, it is advised that the speed upwards must be increased and that the hands, shoulders, and hip joint must be extended, as in the posture of a handstand. These results stress to coaches the importance of the bodies speed during the ascent in the motion.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1397-1405
• /
• 2013

The optimal rib pattern design of B-pillar trim considering occupant head protection can be determined by two methods. One is the conventional approximate optimization method that uses the statistical design of experiments (DOE) and response surface method (RSM). Generally, approximated optimum results are obtained through the iterative process by trial-and-error. The quality of results strongly depends on the factors and levels assigned by a designer. The other is a methodology derived from previous work by the authors, called the sequential design of experiments (SDOE), to reduce the trial-and-error procedure and to find an appropriate condition for using artificial neural network (ANN) systematically. An appropriate condition is determined from the iterative process based on the analysis of means. With this new technique and ANN, it is possible to find an optimum design accurately and efficiently.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.11-21
• /
• 2005

A three-dimensional parallel Euler flow solver has been developed for the simulation of unsteady rotor-fuselage interaction aerodynamics on unstructured meshes. In order to handle the relative motion between the rotor and the fuselage, the flow field was divided into two zones, a moving zone rotating with the blades and a stationary zone containing the fuselage. A sliding mesh algorithm was developed for the convection of the flow variables across the cutting boundary between the two zones. A quasi-unsteady mesh adaptation technique was adopted to enhance the spatial accuracy of the solution and to better resolve the wake. A low Mach number pre-conditioning method was implemented to relieve the numerical difficulty associated with the low-speed forward flight. Validations were made by simulating the flows around the Georgia Tech configuration and the ROBIN fuselage. It was shown that the present method is efficient and robust for the prediction of complicated unsteady rotor-fuselage aerodynamic interaction phenomena.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.692-698
• /
• 2015

This paper represents a trajectory design and analysis technique which uses invariant manifolds of the circular restricted three body problem. Instead of the classical patched conic method based on 2-body problem, the equation of motion and dynamical behavior of spacecraft in the circular restricted 3-body problem are introduced, and the characteristics of Lyapunov orbits near libration points and their invariant manifolds are covered in this paper. The trajectories from/to Lyapunov orbits are numerically generated with invariant manifolds in the Earth-moon system. The trajectories in the Sun-Jupiter system are also analyzed with various initial conditions in the boundary surface. These methods can be effectively applied to interplanetary trajectory designs.

• Archives of Reconstructive Microsurgery
• /
• v.16 no.2
• /
• pp.100-107
• /
• 2007

Treatment of giant cell tumor of distal radius can be treated in several ways according to the aggressiveness of the tumor. But the management of giant cell tumor involving juxta-articular portion has always been a difficult problem. In some giant cell tumors with bony destruction, a wide segmental resection may be needed for preventing to recur. But a main problem is preserving of bony continuity in bony defect as well as preservation of joint function. We have attempted to overcome these problems by using a microvascular technique to transfer the fibula with peroneal vascular pedicle or anterior tibial vessel as living bone graft. From April 1984 to July 2005, we performed the reconstruction of wide bone defect after segmental resection of giant cell tumor in 14 cases, using Vascularized Fibular Graft, which occur at the distal radius. VFG with peroneal vascular pedicle was in 8 cases and anterior tibial vessel was 6 cases. Recipient artery was radial artery in all cases. Method of connection was end to end anastomosis in 11 cases, and end to side in 3 cases. An average follow-up was 6 years 6 months, average bone defect after wide segmental resection of lesion was 6.8 cm. All cases revealed good bony union in average 6.5 months, and we got the wide range of motion of wrist joint without recurrence and serious complications. Grafted bone was all alive. In functional analysis, there was good in 7 cases, fair in 4 cases and bad in 1 case. Pain was decreased in all cases but there was nearly normal joint in only 4 cases. Vascularized fibular graft around wrist joint provided good functional restoration without local recurrence.

• Clinics in Shoulder and Elbow
• /
• v.19 no.3
• /
• pp.130-136
• /
• 2016

Background: A novel technique for the repair of tears of the upper subscapularis tendon-intraarticular knotless fixation-has been introduced recently. The purpose of this study was to evaluate the clinical and structural outcomes of arthroscopic intraarticular knotless fixation for the treatment of upper subscapularis tendon tears. Methods: We retrospectively analyzed the clinical and radiological outcomes of 27 patients who underwent arthroscopic intraarticular knotless fixation for upper subscapularis tendon tears. Finally, a total of 10 patients who could participate in at least a 6 month follow-up of magnetic resonance imaging evaluation and in a least 1-year follow-up on an outpatient basis were enrolled in our study. The mean age at the time of operation was 60.7 years, and the mean duration of follow-up was 14.7 months. Two patients had concomitant tears of the supraspinatus tendon and 8 patients had concomitant tears of the supraspinatus and the infraspinatus tendons. Results: The clinical and radiological outcomes improved after the patients had undertaken arthroscopic intraarticular knotless fixation. The mean visual analogue scale score for pain during motion improved from 6.7 preoperatively to 1.4 at the final follow-up (p<0.001). The mean Constant score improved from 59.3 preoperatively to 79.6 at the final follow-up, and the mean the University of California at Los Angeles score, from 21.7 to 30.2, respectively (p<0.001 and p<0.001). The upper subscapularis tendon tear was healed in every patient except one (90%), for the patient had suffered from a postoperative trauma that resulted in a retear. Conclusions: We found that arthroscopic intraarticular knotless fixation gives good clinical and structural outcomes for the repair of upper subscapularis tendon tears. Arthroscopic intraarticular knotless fixation provided such a reliable and efficient restoration of the subscapularis tendon footprint that we anticipate it will become a widely-used procedure for upper subscapularis tendon tears.

• Archives of Reconstructive Microsurgery
• /
• v.17 no.2
• /
• pp.101-107
• /
• 2008

Purpose: Free flaps from the great toe are an established method for reconstruction of absent or partially amputated thumbs. However, options differ as to which technique represents the ideal solution for each level of amputation. Various methods of distal thumb reconstruction have been proposed. We prefer to transplant the entire great toe nail complex with the almost all of the pulp rather than a portion of the nail. This paper reflects our experience in using the great toe mini wrap-around flap for distal thumb reconstruction. Materials and Methods: In the period from October of 2005 to July of 2007, 9 patients were treated for traumatic thumb defects localized at the distal phalanx of the thumb. The patients included seven men and two women. The mean age was 44 years (range, 21~60) and the dominant right hand was involved in seven of nine patients. Results: The transferred flaps have survived completely in all cases. The mean range of motion in the interphalangeal joints was 51o, with 73% of the normal uninjured opposite hands. The two-point discrimination was 10.5 mm (range, 5~13 mm). In Semmes-Weinstein monofilament test, the sensibility was 4.31 in 4 cases, 3.61 in 3 cases and 2.83 in 2 cases. The pinch power was 64% (range, 55~95%) of the opposite hand. All patients were satisfied with the appearance of the reconstructed thumb and felt comfortable at final follow-up. Conclusion: We have successfully reconstructed 9 cases of traumatic distal thumb defects using the mini wrap-around free flap. The mini wrap-around free flap in great toe is an excellent alternative method for distal thumb reconstruction in selected patients.

• Journal of ILASS-Korea
• /
• v.22 no.4
• /
• pp.210-217
• /
• 2017

A gasoline direct injection engine has an intake air temperature can be lowered by the fuel vaporization in the combustion chamber increase the volume efficiency is high compression ratio. Therefore, study for injection rate and characteristics which influence mixture formation in combustion chamber is important. Movement of the injector needle has a direct effect on the injection of the fuel, such as formation of cavitation, the fuel injection rate, etc. Therefore, recent studies on the dynamic characteristics of the injector considering the movement of the needle have been reported, but it takes a lot of time and cost to experimentally confirm the movement of the needle inside the injector. In this study, AMESim, a commercial 1-D code, and Star-CCM+, a 3-D CFD code, were used to predict the dynamic performance of the injector with needle motion. In order to predict the movement of the needle under the high pressure, the result of the surface pressure distribution according to the movement of the needle was derived by using the morphing technique of flow analysis. In addition, we predicted the injection rate of the injector considering the movement of the needle in conjunction with the 1-D code. The injection rate of the injector was measured by the BOSCH's method and the results were similar to those of the simulation results. This method can predict the injection rate and injection characteristics and this result is expected to be used to predict the performance of gasoline direct injection engines with low cost and time in the future.

• Journal of the Korean Ceramic Society
• /
• v.32 no.12
• /
• pp.1357-1368
• /
• 1995

Nasigels of composition Na0.75Zr2PSi2O12 and Na3Zr2PSi2O12 have been synthesized by the sol-gel technique using metal alkoxide precursors. The monolithic dry gels of Na0.75Zr2PSi2O12 with no crack have been prepared by the control of the shrinkage rte, but gels of Na3Zr2PSi2O12 were impossible to prepare without cracking. The gels treated up to 80$0^{\circ}C$ led to the formtion of glass but the glasses were converted to the crystalline phases at above this temperature. Crystaline phases precipitated from the Na0.75Zr2PSi2O12 glass were NASICON-like phase, Na2Si2O5, and free Zirconia. Phase that precipitated from the Na3Zr2PSi2O12 was only rhombohedral NASICON. For Na0.75Zr2PSi2O12 gels, framework of PO4 tetrahedra and SiO4(PO4) tetrahedra formed at low temperature but changed to that of SiO4 and SiO4(PO4) tetrahedras as it were crystallized. In the case of Na3Zr2PSi2O12 gel, framework of isolated PO4 and SiO4 tetrahedras formed at low temperature but changed to SiO4(PO4) tetrahedra framework which usually formed in the NASICON crystal after crystallization at high temperature. The gels treated up to 80$0^{\circ}C$ contained the residual water. The ionic conduction was attributed to the motion of proton and Na+ ion at low (up to 150~20$0^{\circ}C$) and high temperatures, respectively. As the temperature of heat treatment increased, ionic conductivity gradaully increased with the extent of precipitation of crystalline phase.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.04a
• /
• pp.89-97
• /
• 1998

This study is intended to investigate the seismic responses of bridge structures considering site effects. The site effects in the seismic analysis of bridge structures were classified into two parts. At first, the seismic responses of the structures on each "soil profile types" of the code were evaluated in accordance with code-specified method and compared with results of time-history analysis method. And next, as a second stage of the study, the responses of the two different soil with considerably different soil properties, even though they are classified to the same "soil profile types" of the code, were evaluated and compared each other. The first part of study is purposed to evaluate the applicability of code-specified method, while the other part is purposed to find the variance of the seismic responses from the different soil sites in the same soil profile types of the code. For the analysis, two major methods of the code, single-mode spectral anaysis and multi-mode spectral analysis, were used and the time-history analysis method which is expected to give more accurate responses was also used for the comparison purposes. For the time-history analysis, time-domain analysis technique of the lumped-mass model with frequency-independent soil springs and dampers was adopted and artificially generated spectra of the code was used as input motion. As the results of the study, the code specified methods for the seismic responses considering the site effects were verified to give the results in conservative side for the most of the cases. However, for the structures on the site with considerable flexibility, the responses of the bridge girders or deckplates by the code methods both in section forces and horizontal movement responses, may have much smaller values than the actual responses. Therefore, more detailed analysis considering the flexibility of the base soil may be required to have more reasonable results in girder responses.in girder responses.