• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.757-758
• /
• 2008

This paper aims to propose an emergency recognition system using multimodal information extracted by an image processing module, a voice processing module, and a gravity sensor processing module. Each processing module detects predefined events such as moving, stopping, fainting, and transfer them to the multimodal integration module. Multimodal integration module recognizes emergency situation by using the transferred events and rechecks it by asking the user some question and recognizing the answer. The experiment was conducted for a faint motion in the living room and bathroom. The results of the experiment show that the proposed system is robust than previous methods and effectively recognizes emergency situations at various situations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.2
• /
• pp.49-59
• /
• 1993

A new signal processing technique is applied to four-cylinder spark and compression ignition engines for the diagnosis of power faults inside the cylinders. This technique utilizes two-sided directional power spectra(예S) of complex vibration signals measured from engine blocks as the patterns for engine cylinder power faults. The dPSs feature that they give not only the frequency contents but also the directivity of the engine block motion. For the automatic detection/diagnosis of cylinder power faults, pattern recognition method using multi-layer neural networks is employed. Experimental results show that the sucess rate for diagnosis of cylinder power faults using dPSs is higher than that using the conventional one-sided power spectra. The proposed technique is also tested to check the robustness to the sensor position and the engine rotational speed.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.754-759
• /
• 2008

본 연구에서는 관성 센서가 내장된 컨트롤러를 이용하여 정의된 5가기의 동작과 비교하여 가상의 댄스 캐릭터와 함께 즐기는 체험형 댄스 콘텐츠 시스템을 제안한다. 체험자는 화면에 순서대로 출력되는 동작 리스트와 같은 움직임을 취하게 되며 동작의 정확도 및 타이밍에 따라 차등 점수를 부여토록 하였다. 이러한 댄스 콘텐츠 시스템을 위해서는 각 동작 대해 학습과 실시간으로 사용자의 동작을 구분하는 것이 필요하다. 다수개의 소형 무선 컨트롤러를 손과 발 등 주요부위에 착용하고 논문에 제안된 방법을 활용하게 되면 사용자의 흥미와 몰입감을 더해줄 것으로 기대된다.

• Communications for Statistical Applications and Methods
• /
• v.30 no.6
• /
• pp.551-560
• /
• 2023

Recently, there has been significant research into the recognition of human activities using three-dimensional sequential skeleton data captured by the Kinect depth sensor. Many of these studies employ deep learning models. This study introduces a novel feature selection method for this data and analyzes it using machine learning models. Due to the high-dimensional nature of the original Kinect data, effective feature extraction methods are required to address the classification challenge. In this research, we propose using the first four moments as predictors to represent the distribution of joint sequences and evaluate their effectiveness using two datasets: The exergame dataset, consisting of three activities, and the MSR daily activity dataset, composed of ten activities. The results show that the accuracy of our approach outperforms existing methods on average across different classifiers.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.774-784
• /
• 2017

Occupancy sensors installed in buildings and households turn off the light if the space is vacant. Currently PIR (pyroelectric infra-red) motion sensors have been utilized. Recently, the researches using camera sensors have been carried out in order to overcome the demerit of PIR that can not detect static people. If the tradeoff of cost and performance is satisfied, the camera sensors are expected to replace the current PIRs. In this paper, we propose vision sensor-based occupancy detection being composed of tracking, recognition and detection. Our softeware is designed to meet the real-time processing. In experiments, 14.5fps is achieved at 15fps USB input. Also, the detection accuracy reached 82.0%.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.10
• /
• pp.331-338
• /
• 2016

In this paper, we propose a system for transmitting army hand signals using motion sensors. The proposed system consists of a squad commander device, squad member devices, and a server. The squad command device and squad member device have been implemented using a micro arduino, an accelerometer sensor, and a gyroscope sensor, and the server has been implemented using a Rasberry Pi 3. Because the devices are made in the form of band, they are lightweight and portable. The proposed system can transmit the hand signals through vibration in conditions of poor visibility. We have designed and implemented the squad member device to be able to recognize four military hand signals. Through experiments, the proposed system have shown 88.82% of correct recognition. In conclusion, we expect to increase effectiveness of army operations and survival rate of soldiers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.218-232
• /
• 2022

Researches are underway to use a radar sensor, a sensor used for object recognition in vehicles, for position estimation. In particular, a method of classifying dynamic and static objects using the Doppler velocity, the output from the radar sensor, and calculating ego-motion using only static objects has been researched recently. Also, for the existing dynamic object classification, several methods using RANSAC or robust filtering has been proposed. Still, a classification method with higher performance is needed due to the nature of the position estimation, in which even a single failure causes large effects. Hence, in this paper, we propose a method to improve the classification performance compared to existing methods through tracking and filtering of dynamic objects. Additionally, the method used a GMPHD filter to maximize tracking performance. In effect, the method showed higher performance in terms of classification accuracy compared to existing methods, and especially shows that the failure of the RANSAC could be prevented.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.4
• /
• pp.35-42
• /
• 2024

In this study, we propose a method for real-time recognition and analysis of dog behavior using a motion sensor and deep learning techonology. The existing home CCTV (Closed-Circuit Television) that recognizes dog behavior has privacy and security issues, so there is a need for new technologies to overcome them. In this paper, we propose a system that can analyze and care for a dog's behavior based on the data measured by the motion sensor. The study compares the MLP (Multi-Layer Perceptron) and CNN (Convolutional Neural Network) models to find the optimal model for dog behavior analysis, and the final model, which has an accuracy of about 82.19%, is selected. The model is lightened to confirm its potential for use in embedded environments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.7
• /
• pp.903-909
• /
• 2018

We propose laser scanner sensor system based walking pattern and tracking method of multiple human. This system uses laser scanners sensors and is applicable to wide and crowded area such as hospital and medical care center. The primary objective of this research is to promote the development of robust, repeatable and transferable software for security system that can automatically detect, track and follow people in public area. We developed the method of human identification for this system. Our method is following: 1. Best-walking pattern data are obtained by the help of human position and direction data obtained by laser scanners. 2. Human identification is conducted by calculating the correlation between the step length of walking human. It becomes possible to conduct human identification even in crowded scenes by estimating the movements of waling human' feet are periodic. In the experiment in the station, some effectiveness of this method became clear.

• Journal of Sensor Science and Technology
• /
• v.24 no.3
• /
• pp.175-180
• /
• 2015

Worldwide, studies on intelligent vehicles for the convenience of drivers have been actively conducted as the number of cars has increased. However, vehicle convenience enabled by buttons lowers the concentration on driving and hence poses as a huge threat to the safety of the driver. The use of one of the convenient features, impaired driving auxiliary equipment, is limited because of its complex usage, and this device also hinders the front view of the driver. This paper proposes a vehicle-control device for controlling the convenient features as well as changes in speed and direction using gestures and motions of the driver. This device consists of an ultrasonic sensor for recognizing movement, an arduino for accepting signal control functions and servo and DC motors apply to various vehicle parts. Firstly, the vehicle-control device was designed using a 3D CAD program known as Solid-works based on the size of the steering wheel. Then, through simulations, a suitable length for minimizing the absorbent between ultrasonic sensors was confirmed using a program known as COMSOL Multiphysics. Finally, simulation results were verified through experiments, and the optimal size of the device was identified through the number of errors.