• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.298-303
• /
• 2001

A fundamental study on the under water harvest-type ice storage system and its temperature characteristics in ice storage system was performed experimentally. The experiments were conducted by changing the inlet refrigerant temperature of an evaporator to analyzing the thermal fluid motion inside the ice storage tank. From the experimental results, the cold storage characteristics were investigated by measuring the axial and radial temperature variations inside the ice storage tank with respect to the inlet and outlet refrigerant temperatures of an evaporator. In case of the under water harvest-type ice storage system, thermal fluid. motion inside the ice storage tank was shown differently in comparison with that of other ice storage systems. During the cooling storage process, there was no supercooling phenomenon in the ice storage tank. These results show the characteristic of this system and the possibility of application to other fields.

• 한국초등과학교육학회지:초등과학교육
• /
• 제20권1호
• /
• pp.31-43
• /
• 2001

The purposes of this study were grasping the degree of students' understanding for course contents through the concept mapping strategy as meaningful learning in science and measuring the effect for change of conception and changing the misconception. The results of the study were as follows: 1. Before the lesson, only 10.7％ of students had scientific conception of molecular motion. Other students had various kinds of misconceptions. 2. The extent of concept formation after lesson through the using concept mapping strategy was tested. As a result, compared with the controlled group, the experimental group showed higher extent of sound concept formation (statistical significance level 0.05). 3. The differences between the experimental group and the control group were analyzed into quantitative and qualitative points of view. The results of the comparison showed that the maps of the students were well configured in the categories of the relationship, the hierarchy and the examples; while students showed lower abilities in the category of the cross-links. 4. The student's attitudes to ward concept mapping was positive. Most of the students answered that teaching strategy of concept mapping benefits them in meaningful learning outcomes.

• 한국해양공학회지
• /
• 제31권5호
• /
• pp.340-345
• /
• 2017

It is important to predict the hydrodynamic maneuvering derivatives, which consist of the forces and moment acting on a hull during a maneuvering motion, when estimating the maneuverability of a ship. The estimation of the maneuverability of a ship with a change in the stern hull form is often performed at the initial design stage. In this situation, a method that can reflect the change in the hull form is necessary in the prediction of the maneuverability of the ship. In particular, the linear hydrodynamics maneuvering derivatives affect the yaw checking motion as the key factors. In the present study, static drift calculations were performed using Computational Fluid Dynamics (CFD) based on Reynolds Average Navier-Stokes (RANS) for a 40-segment hull. A prediction method for the linear hydrodynamic maneuvering derivatives was proposed using the slender body theory from the distribution of the lateral force acting on each segment of the hull. Moreover, the results of a comparison study to the model experiment for KVLCC1 performed by KRISO are presented in order to verify the accuracy of the static drift calculation. Finally, the linear hydrodynamic maneuvering derivatives obtained from both the model test and calculation are compared and presented to verity the usefulness of the method proposed in this study.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.53-60
• /
• 2009

Recently, since there are several problems in space, the infra-structure and the facilities in the contiguity of the existing harbors due to the trend of enlarging the container capacity of the large container vessel, a special floating platform named as the Mobile Harbor has been proposed conceptually as an effective solution of those problems. Two kinds of hull shapes, a conventional mono-hull type and a catamaran type, are proposed as midway feeders to transfer containers to the harbor on land from a large container ship on near shore. In this study, the motion response and mooring analysis are carried out for comparing the global performance of two types of Mobile Harbor. Robot arm mooring facility specially is devised and newly tried to use for the safe fixation of a large container ship and the Mobile Harbor on near shore. It would be expected for this comparison study to give a guideline to design the efficient hull form for a midway loader.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 추계 학술대회
• /
• pp.31-37
• /
• 2006

The objective of this research is to select the most effective technique from task related techniques(motion & time study, job redesign, physical environment improvement) for improving work efficiency in shipbuilding enterprise. This study consists of several principal steps. The first step is to design critical criteria in evaluating work efficiency in shipbuilding enterprises. The second step is to develop sub-criteria of the critical criteria. The third step is to develop a four level AHP(Analytic Hierarchy Process)structure using the critical criteria, sub-criteria and techniques from task related techniques. The fourth step is to develop the pairwise comparison matrix by each level of AHP structure, which was based on survey data collected at the H heavy industry. And the last step is to select the most effective technique from task related techniques using AHP analysis. The result of AHP analysis has shown clear difference in priority among task related techniques in terms of work efficiency of the shipbuilding enterprise: The reduction of normal time has more importance than the reduction of allowance time, motion & time study techniques are most important for the reduction of normal time, physical environment improvement is most important for the reduction of allowance time as well.

• 한국항공우주학회지
• /
• 제45권11호
• /
• pp.989-997
• /
• 2017

액체로켓엔진용 연소기 산화제 개폐밸브로 사용되는 밸브 개방 자체유지가능형 포핏밸브의 밸브 개방 특성을 파악하기 위해 밸브 개방 과정에서의 과도 응답 특성에 대한 연구를 수행하였다. 수치해석을 위해 구동가스 공급시스템을 하나의 오리피스로 모델링하고 밸브 행정 위치 및 구동압력 조건에 따라 밸브 무빙파트의 운동방정식을 유도하였다. 상온 및 연소시험에서의 밸브 작동 시험결과와 계산 결과의 비교를 통해 계산 결과의 신뢰성을 검증하였으며, 본 연구의 실제적인 적용 예로써 높은 구동압력에서의 밸브 개방 속도 조절을 위한 오리피스 적용 사례를 소개하였다.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2206-2222
• /
• 1995

In this study, the characteristics of the three-dimensional turbulence flow in a rotating square sectioned 90.deg. bend were investigated by numerical simulation. And a dimensionless number, Coriolis force ratio, primarily subjected to the feature of the flow in the rotating 90.deg. bend was obtained as a result of one-dimensional theory. In the simulation study, low Reynolds number ASM developed by Kim(1991) in the square sectioned 180.deg. bend flow was modified in order to consider the rotational effects in the testing flows. In the near wall region of low Reynolds number, four turbulence models were employed and compared in order to find the most appropriate model for the analysis of the rotating 90.deg. bend flow. By comparison of the results with the experimental data, it is shown that low Reynolds number Algebraic Stress Model with rotating terms reflects most correctly the rotational effects. As the results of this study, centrifugal forces associated with the curvature of the bend and Coriolis forces and centripetal forces associated with the rotation affect directly both the mean motion and the turbulent fluctuations. Their actions on the mean flow are to induce a secondary motion while their effects on turbulence are to modify the pressure strain.

• 한국음향학회지
• /
• 제15권6호
• /
• pp.47-51
• /
• 1996

실린더 운동방정식은 실린더 내에서 발생되는 소음 해석에 매우 중요하다. 그러므로, 지금까지 많은 학자들에 의해 실린더 운동방정식을 유도되었다[1]. 참고문헌[6]에서는, 새로 제안돈 실린더 운동방정식, Junger and Feit의 실린더 운동방정식 그리고 가정해에 의한 선형방정식으로, 실린더가 자유 운동을 할 때, 자유파수를 구하였다. 본 논문에서는 자유파수들의 분산곡선들을 이용하여, 두 실린더운동방정식을 비교하였고, 링주파수와 링확장주파수의 계산으로, 자유파수들의 분산곡선의 물리적인 의미를 부가하였다. 이 결과, 새로 유도된 실린더 운동방정식의 타당함을 보였다. 새로 제안된 실린더 운동 방정식을 이용하면, 산업현장에서, 실린더 내의 고체파에 대한 보다 정확한 분석을 할 수 있을 것으로 사료된다.

• 한국멀티미디어학회논문지
• /
• 제21권8호
• /
• pp.982-990
• /
• 2018

In recent years, many wearable devices and mobile apps related to life care have been developed, and a service for measuring the movement during walking and showing the amount of exercise has been provided. However, they do not measure walking in detail, so there may be errors in the total calorie consumption. If the user's behavior is measured by a multi-axis sensor and learned by a machine learning algorithm to recognize the kind of behavior, the detailed operation of walking can be autonomously distinguished and the total calorie consumption can be calculated more than the conventional method. In order to verify this, we measured activities and created a model using a machine learning algorithm. As a result of the comparison experiment, it was confirmed that the average accuracy was 12.5% or more higher than that of the conventional method. Also, in the measurement of the momentum, the calorie consumption accuracy is more than 49.53% than that of the conventional method. If the activity recognition is performed using the wearable device and the machine learning algorithm, the accuracy can be improved and the energy consumption calculation accuracy can be improved.

• 대한인간공학회지
• /
• 제24권4호
• /
• pp.55-62
• /
• 2005

This study examined the effect of ergonomic heel rest that was designed for drivers who have physical handicap in the low leg muscles or have to drive prolonged hours with frequent foot pedaling. An experiment was designed to test the ergonomic heel rest with traditional foot pedal. Forty subjects participated in the experiment. Electromyography(EMG) was used to monitor the muscle activity and fatigue of right leg, and Electro-goniometer was used to measure the ranges of motions of the knee and ankle. A simulator of driver's seat was built for the experiment and the heel rest was installed on it. In order to examine the low muscle activity and range of motion, subjects used the foot pedal for 15 minutes repetitively for each experimental condition. Another 15 minutes test without the heel rest was also performed for comparison. The Root Mean Square(RMS) and Mean Power Frequency(MPF) Shift were used to quantify the level of muscle activity and local muscle fatigue. In results, statistically significant decreases of muscle activity and fatigue were found in all the low leg muscles. The range of motion of the knee and ankle joint also decreased when the heel rest was used. The mechanism of the heel rest effect was discussed in this study. This type of heel rest can be applied to real driving situation after ensuring the safety, or overcoming the psychological discomfort possibly due to unfamiliarity.