• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.54-60
• /
• 2004

발포폴리스티렌(EPS)의 효율적인 재활용 기술개발의 일환으로서 폐 발포폴리스티렌을 중합성 모노머인 스티렌에 용해한 고분자 용액에 가교제, 개시제, 촉진제 등을 첨가하여 상온 중합성 결합재를 개발하였으며 이를 이용한 폴리스티렌 모르타르를 제조하여 그 중요한 경화특성인 사용가능시간, 건조양생재령에 따른 발열온도 및 길이변화 거동에 미치는 폐 발포폴리스티렌 용액농도 및 TMPTMA 첨가량의 영향에 대해서 검토하였다. EPS용액을 이용한 결합재 및 폴리스티렌 모르타르의 사용가능시간은 EPS용액 농도 및 TMPTMA 첨가율의 증가에 따라서 짧아지며, 또한 폴리스티렌 모르타르의 경화에 따른 길이변화는 EPS용액 농도 및 TMPTMA 첨가율에 크게 영향을 받는데 이를 적절히 조절하여 경화특성을 제어함으로써 저수축 혹은 무수축 폴리스티렌 모르타르의 제조가 가능하다는 것을 검증하고 있다.

• 콘크리트학회논문집
• /
• 제18권5호
• /
• pp.667-675
• /
• 2006

대분분의 콘크리트 구조물은 여러 가지 환경요인에 노출되었는데, 여러 가지 환경요인 중, 요인 한가지만의 작용이 아니라 여러 가지 요인이 복합적으로 작용하여 콘크리트의 내구성은 현격하게 저하하게 된다. 본 연구에서는 복합양생을 받는 폴리머 시멘트 모르타르에 관한 강도 및 내구성 개선효과를 실험하였다. 폴리머 종류, 폴리머 시멘트비, 시멘트-잔골재비를 변화하여 폴리머 시멘트 모르타르를 제작한 후, 5가지의 환경요인, 즉 양생조건을 달리하여, 강도성상, 중성화, 염화물이온 침투, 내동해성, 내산성을 시험하였다. 시험결과, 폴리머 시멘트 모르타르는 보통 시멘트 모르타르에 비해 우수한 강도성상을 나타냈으며, 양생조건 II와 V에서 강도가 개선되었으나, 양생조건 I와 IV에서는 강도의 발현이 낮았다. 또한 중성화 및 염화물이온 침투 깊이는 양생조건 III-C, IV-B, V-A 순으로 작아졌으며, 폴리머 시멘트비의 증가에 따라 감소하였다. 본 연구에서 폴리머 시멘트비의 적정 혼입비는 10% 또는 15%이었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.1011-1016
• /
• 2001

The purpose of this study is to find out the effect of polymer glass transition temperature on mechanical properties of polymer latex-modified mortars in comparison with ordinary cement mortar. The Polymer latex-modified mortars are prepared with 5, 10, 15 and 20% of polymer cement ratio respectively, and properties of modified mortars such as air content, compressive, flexural and tensile strengths are tested. The test results indicate that the types of polymer dispersion and the polymer-cement ratio are very important factors to characterize the properties of polymer-modified mortars, and also the glass transition temperature of polymer dispersions has an important effect on the performance of polymer-modified mortars. The modifying effects of two kinds of polymer dispersion, St/BA-1 and SBR, are evaluated.

• Computers and Concrete
• /
• 제15권5호
• /
• pp.759-770
• /
• 2015

In this study, a multi-layer perceptron neural network (MLPNN) prediction model for compressive strength of the cement mortars has been developed. For purpose of constructing this model, 8 different mixes with 240 specimens of the 2, 7, 28, 56 and 90 days compressive strength experimental results of cement mortars containing fly ash (FA), silica fume (SF) and FA+SF used in training and testing for MLPNN system was gathered from the standard cement tests. The data used in the MLPNN model are arranged in a format of four input parameters that cover the FA, SF, FA+SF and age of samples and an output parameter which is compressive strength of cement mortars. In the model, the training and testing results have shown that MLPNN system has strong potential as a feasible tool for predicting 2, 7, 28, 56 and 90 days compressive strength of cement mortars.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.555-558
• /
• 2005

The purpose of this study is to evaluate the chemical resistance of polymer powder-modified mortars with special accelerator component. Polymer powder-modified mortars with the accelerator are prepared with various polymer-binder ratios, and tested for flexural and compressive strengths and mass change. Chemicals resistance was tested by dealing with $10\%$ HCl and $5\%\;H_2SO_4$ aqueous solution. As a result, the weight reduction ratio of the mortars decreased with increasing polymer-binder ratio. However, in the viewpoint of strength reduction by chemical attacks, the maximum chemical resistance of the mortars was shown at a polymer-binder ratio of $5\%$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.577-580
• /
• 2006

As this study is to estimate resistance of cement mortars using crushed sand under chemical attacks. Besides tests have been carried out with cement mortars by river sand and crushed sand by fine sand, cement mortars mix various proportions of silica fume and fly ash(up to 15% and 50% by weight for cement) were prepared and immersed in pure water, sodium sulfate solution, magnesium sulfate solution, seawater for 28days, 60days, 90days and 180days. Test on the change in the weight and compressive strength of cement mortars according to the duration of immersion time and the content of silica fume and fly ash was performed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.519-522
• /
• 2005

As this study is to test effects of chemical attack on deterioration of cement mortars using in crushed sand. Besides tests have been carried out with cement mortars by river sand and crushed sand by fine sand, cement mortars mix various proportions of slica fume and fly ash(up to $15\%$ and $50\%$ by weight for cement) were prepared and immersed in pure water, sodium sulfate solution, magnesium sulfate solution, seawater for 28days. Test on the change in the weight and compressive strength of cement mortars according to the duration of immersion time and the content of slica fume and fly ash was performed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.299-300
• /
• 2010

마그네슘계열 활성화제의 중요성과 한계를 평가하기 위해 $MgNO_3$이 첨가된 알칼리활성 모르터의 유동성과 압축강도가 평가되었다. 주요변수는 $MgNO_3$ 첨가율과 양생조건이다. 실험결과 알칼리활성 모르터의 초기 플로우는 $MgNO_3$ 첨가량에 큰 영향을 받지 않았다. 알칼리활성 모르터의 28일 압축강도는 수중양생이 대기양생보다 30~60% 높았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.309-312
• /
• 2005

Admixture compounds for shortening setting time and accelerating early strength development of EVA polymer powder-modified mortars were made by mixing various quick setting agents. As a result, the quick setting agents contribute to strength development of the mortars in the early curing age of 168h or less. In the viewpoint of early strength development of EVA polymer powder-modified mortars, an quick setting agent content of 20$\%$ is recommended. Early strength of EVA polymer powder-modified mortars expresses the excellent strength with 5$\%$, 10$\%$ of rates of polymer mixing. The rate of polymer mixing was able to be adjusted and flexural strength which is a predeterminded initial strength was also able to satisfy 3MPa(s).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.731-734
• /
• 2004

Admixture compounds for reducing setting time and accelerating early strength development of redispersible polymer powder-modified mortars were made by mixing various inorganic accelerating inorganic materials. Redispersible polymer powder-modified mortars are prepared with various accelerator contents, and it was tested for setting time, flexural and compressive strengths. As a result, the accelerators contribute to strength development of the mortars in the early curing age of 12h or less. In the viewpoint of early strength development of redispersible polymer powder-modified mortars, an accelerator content of $20\%$ is recommended.