• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.201-206
• /
• 2005

In this work, we tried to improve the fabrication process in HVPE (Hydride Vapor Phase Epitaxy) system by using Si(111) substrate with pre-deposited Al layer. PL measurements was done for samples with and without pre-deposited Al on Si and it was also examined the dependence of the optical characteristic properties on AlN buffer thickness for GaN/AIN/Al/Si. A sample with thin Al nucleation layer on Si substrate reveals a better optical property than the other. And it suggests that the thickness for AlN buffer layer with thin Al nucleation layer on Si(111) substrate is most proper about $260{\AA}$ to grow GaN in HVPE system. The surface morphology of GaN clearly shows the hexagonal crystallization. The XRD pattern showed strong peak at GaN{0001} direction.

• Membrane Journal
• /
• v.13 no.3
• /
• pp.200-209
• /
• 2003

Polymer-metal complexed membranes were prepared by solvent evaporation method using ethylcellulose, platinum(II)acetylacetonate, and rhodium(III)acetylacetonate. The various composition of metal salt(0.3-4.0 wt%) were employed to obtain the optimum performance of final membrane. EC-metal complexed membranes were characterized by FTIR and scanning electron microscopy(SEM) to observe the morphology and the performance of oxygen, nitrogen, carbon dioxide, and methane gases was tested. It was shown that the metal salts enhanced the permeability of all gases without decrease of selectivity. However, it was found that Pt had more effects on the permeability of oxygen and nitrogen gases while Rh had more effects on the permeability of carbon dioxide and methane gases. EC-Pt complexed membrane(Pt 1.0 wt%) even showed the enhanced selectivity of oxygen/nitrogen(37%) due to the affinity characteristic of Pt to oxygen.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.236-239
• /
• 2005

This study investigated the effect of ovariectomy (OVX) on the rat bone fur long term (22 weeks). In previous researches, there were many studies for morphology of OVX-induced osteoporotic bones based on micro-Computed Tomography (micro-CT). However, there were few studies fpr detecting and tracking changes of mechanical characteristics in the lumbar vertebrae of OVX rat fur long-term. For this study, one female Sprague-Dawley rat was used: an OVX rat. The 4th lumbar of the OVX rat was utilized as a specimen. Morphological characteristics could be investigated fur the lumbar vertebrae in an OVX rat by using in-vivo Micro-CT. An OVX rat was scanned at week 0 (just before surgery), at week 4, at week 8, at week 16 and at week 22 after surgery. Micro finite element $({\mu}FE)$ analysis was used to investigate mechanical characteristics in the lumbar vertebrae for an OVX rat.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.38 no.2
• /
• pp.38-50
• /
• 2019

We investigated the developmental characteristics and life cycle of the lawn cutworm, Spodoptera depravata (Lepidoptera: Noctuidae), which is one of the most important pests causing economic damage in grass production. For larval culture, we provided the zoysiagrass at $25^{\circ}C$ and $60{\pm}5%$ humidity. The durations of the developmental stages were as follows: $4.11{\pm}0.19$ days for eggs, $25.17{\pm}3.02$ for larvae, $8.80{\pm}0.28$ for pupae, and $7.57{\pm}0.95$ for adults. We grew the larvae to the 7th instar stage, unlike previous studies, in which it was assumed that the 6th instar was the final age. There was a significant positive correlation between the body length and head capsule width of each instar larvae. In terms of morphology, the eggs changed from light green immediately following oviposition to black as they developed, and the grass-fed larvae changed from light yellow immediately after hatching to green as development continued. We observed a pattern of black spots at regular intervals on the dorsal sides of the abdomens of the final instar larvae. Furthermore, we detected two notable designs on the dorsal side of the front of the head. The pupal colors changed from light brown and green immediately after pupation, to dark brown as the pupal cuticle hardened. The wingspans of the adults were similar in both sexes. However, the forewings of the males had obvious outer lines and eyespots with dark gray-brown backgrounds, whereas the corresponding features on the female forewings were less obvious. The oviposition preperiod was 2.11 days, the oviposition period was 4.2 days, the average fecundity per female was approximately 341 eggs, and the hatching rate was approximately 76.1%.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.2
• /
• pp.189-197
• /
• 2021

Objective : This study aims to investigate the relationship between aneurysm wall enhancement and clinical rupture risks based on the magnetic resonance vessel wall imaging (MR-VWI) quantitative methods. Methods : One hundred and eight patients with 127 unruptured aneurysms were prospectively enrolled from Feburary 2016 to October 2017. Aneurysms were divided into high risk (≥10) and intermediate-low risk group (<10) according to the PHASES (Population, Hypertension, Age, Size of aneurysm, Earlier SAH history from another aneurysm, Site of aneurysm) scores. Clinical risk factors, aneurysm morphology, and wall enhancement index (WEI) calculated using 3D MR-VWI were analyzed and compared. Results : In comparison of high-risk and intermediated-low risk groups, univariate analysis showed that neck width (4.5±3.3 mm vs. 3.4±1.7 mm, p=0.002), the presence of wall enhancement (100.0% vs. 62.9%, p<0.001), and WEI (1.6±0.6 vs. 0.8±0.8, p<0.001) were significantly associated with high rupture risk. Multivariate regression analysis revealed that WEI was the most important factor in predicting high rupture risk (odds ratio, 2.6; 95% confidence interval, 1.4-4.9; p=0.002). The receiver operating characteristic (ROC) curve analysis can efficiently differentiate higher risk aneurysms (area under the curve, 0.780; p<0.001) which have a reliable WEI cutoff value (1.04; sensitivity, 0.833; specificity, 0.67) predictive of high rupture risk. Conclusion : Aneurysms with higher rupture risk based on PHASES score demonstrate increased neck width, wall enhancement, and the enhancement intensity. Higher WEI in unruptured aneurysms has a predictive value for increased rupture risk.

• Korean Journal of Plant Taxonomy
• /
• v.50 no.4
• /
• pp.385-394
• /
• 2020

To elucidate the molecular phylogeny of Neottia japonica, which is a terrestrial orchid distributed in East Asia, the internal transcribed spacer (ITS) of nuclear DNA and the matK of chloroplast DNA were used. A total 22 species of 69 accessions for ITS and 21 species of 114 accessions for matK phylogeny were analyzed with the maximum parsimony and Bayesian methods. In addition, we sought to establish a correlation between the distribution, morphology of the auricles and genetic association of N. japonica with phylogenetic data. The phylogenetic results suggest that N. japonica is monophyletic and a sister to N. suzukii in terms of the ITS phylogeny, while it is paraphyletic with N. suzukii in terms of the matK phylogeny. N. japonica and N. suzukii show similar morphologies of the lip and column, they both flower in April, and they are both distributed sympatrically in Taiwan. Therefore, it appears to be clear that N. japonica and N. suzukii are close taxa within Neottia, although there is incongruence between the nrDNA and cpDNA phylogenies of N. japonica. The incongruence between the two datasets may have various causes, meaning that further studies are needed to confirm the evolutionary process of N. japonica. The phylogenetic status of N. kiusiana, which was not included in previous studies, was as a sister to N. nidus-avis. Meanwhile, the ITS and matK phylogenies are unsuitable for identifying genetic associations with the characteristic of auricles. The phylogenetic topologies of Korean, Taiwanese and mainland Chinese individuals suggest that the populations of N. japonica in Korea originated from China's mainland and island areas. The characterization of regional gene differences could provide useful preliminary data for future studies.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1571-1576
• /
• 2018

Recent study shows that the main reason for limiting CZTS device performance lies in the low open circuit voltage, and crucial factor that could affect the $V_{oc}$ is secondary phases like ZnS existing in absorber layer and its interfaces. In this work, the $Cu_2ZnSnS_4$ thin film solar cells were prepared by sputtering CuSn and CuZn alloy targets. Through tuning the Zn/Sn ratios of the CZTS thin films, the crystal structure, morphology, chemical composition and phase purity of CZTS thin films were characterized by X-Ray Diffraction (XRD), scanning electron microscopy (SEM) equipped with an energy dispersive spectrometer (EDS) and Raman spectroscopy. The statistics data show that the CZTS solar cell with a ratio of Zn/Sn = 1.2 have the best power convention efficiency of 5.07%. After HCl etching process, the CZTS thin film solar cell with the highest efficiency 5.41% was obtained, which demonstrated that CZTS film solar cells with high efficiency could be developed by sputtering CuSn and CuZn alloy targets.

• Korean Journal of Metals and Materials
• /
• v.46 no.11
• /
• pp.747-754
• /
• 2008

Recently, the requirement for the ultra thin copper foil increases with smaller and miniaturized electronic components. Therefore, it is important to examine the surface state of substrate depending on the processing parameter during the anodic oxidation. This study investigated the effect of the various electrolyte concentrations on anodizing of titanium anode prior to copper electrodeposition. Different surface morphology of anodized titanium was obtained at different electrolytic concentration 0.5 M to 3.0 M. In addition, the effect that the surfaces and the electrical characteristics on the electrodeposited copper layer was observed. In this study, surface anodized in the group containing 0.5M $H_2SO_4$ shows more uniform copper crystals with low surface roughness. the surface roughness and sheet resistance for 0.5M $H_2SO_4$ group were $1.353{\mu}m$ and $0.104m{\Omega}/sq$, respectively.

• The Korea Journal of Herbology
• /
• v.34 no.6
• /
• pp.25-32
• /
• 2019

Objectives : Ephedra regeliana, although similar to the other E. sinica, E. intermedia, and E. equisetina, is not authorized by The Korean Pharmacopoeia and yet has also been imported under the name of 'Ma-Hwang'. The aim of this study was to perform a comparative anatomical evaluation of Ephedrae Sinicae Herba (ESH), Ephedrae Intermedicae Herba (EIH), Ephedrae Equisetinae Herba (EEH) and Ephedrae Regelianae Herba (ERH). Methods : Permanent paraffin-embedded specimens were produced using the paraffin-tertiary butyl alcohol (TBA) method, to visualize their anatomical features via light microscopy. Results : ESH and ERH transverse sections were in the shape of a long ellipse, while those of EIH and EEH were in the shape of a circle. These anatomical characteristics substantiated the results of external morphological examination. The sections revealed that each of the four samples showed significantly different cortexes. The cortex of ESH was wider than two thirds of the section, unlike that of the other samples which was relatively narrow. The xylems of ERH, EIH, and EEH demonstrated interconnectivity with other adjacent xylems, contrary to those in ESH. Therefore, the characteristic development of the xylems over time was used to distinguish ERH from the other. Furthermore, parenchymal morphology in the central cylinder was also a good criterion to differentiate between EIH and EEH, since EIH demonstrated parenchymal cells that were shaped like a rounded-triangle, whereas EEH parenchymal cells were chrysanthemum-shaped. Conclusions : The identification-keys established in this study would facilitate the accurate identification of microscopic features of the four varieties of 'Ma-Hwang'.

• Journal of Species Research
• /
• v.12 no.4
• /
• pp.374-414
• /
• 2023

As part of a comprehensive investigation of indigenous prokaryotic species in Republic of Korea in 2022, 156 bacterial strains were isolated from diverse environmental habitats. These strains were assigned to six phyla, namely Acidobacteriota, Deinococcota, Actinomycetota, Bacillota, Bacteroidota, and Pseudomonadota. Each strain was identified based on 16S rRNA gene sequence similarity (>98.7%) and the formation of robust phylogenetic clades with their closest reported species. Among isolates, there is one species belonging to the phylum Acidobacteriota, one species belonging to the phylum Deinococcota, 28 species belonging to the phylum Actinomycetota, 19 species belonging to the phylum Bacillota, 19 species belonging to the phylum Bacteroidota, and 88 species belonging to the phylum Pseudomonadota (comprising 34 species of the class Alphaproteobacteria, 20 species of the class Betaproteobacteria, and 34 species of the class Gammaproteobacteria). Based on 16S rRNA gene sequence analysis, each strain was assigned to independent and predefined bacterial species. Since there were no published or official reports regarding these 156 isolates in Republic of Korea, they are reported as unrecorded species in Republic of Korea. The Gram stain, colony and cell morphology, basic biochemical characteristic, isolation source, and strain ID of each species are described in the species descriptions.