• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.165-166
• /
• 2008

We investigate characteristics of J-aggregation as take advantage of LB technic. In order to confirm the applications possible for the molecular electronic device, the morphological properties of merocyanine dye were investigated by AFM. ${\pi}-A$ curves investigated the surface pressure of the LB film from a liquid to a solid state ranged between 90 and 100 mN/m. We observed aggregation and it's characteristics by using visible reflection spectroscopy. We have observed morphology of merocyanine dye on gold surface by STM. focuses on results obtained in mercocyanide dye of J-aggregation. When LB films of merocyanine dye are mixed with arachidic acid, J-aggregate formation is exhibited. J-aggregate formation has been serving as typical systems in revealing the physical and structural aspects of nano-sized molecular aggregates constructed as muiltilayers.

• Journal of Powder Materials
• /
• v.9 no.5
• /
• pp.315-321
• /
• 2002

Pure tantalum powder has been produced by combining Na as a reducing agent, $K_2TaF_{7}$ as feed material, KCl and KF as a diluent in a stainless steel(SUS) bomb, using the method of metallothermic reduction. The present study investigated the effect of the amount of the diluent and reaction temperature on the characteristics of tantalum powder in the production process. The temperature applied in this study $850^{\circ}C$ and the amount of the additional reductant from +5% of the theoretical amount used for the reduction of the entire $K_2TaF_{7}$. The results showed that as the amount of the diluent increased, the reaction temperature became lower because the diluent prevented a temperature rise. Also, according to the mixture ratio of the feed materials and the diluent changed from 1 : 0.25 to 1 : 2, the particle size decreased from $5\mutextrm{m}$ to $1\mutextrm{m}$ and a particle size distribution which is below 325 mesh in fined powder increases from 71% to 83%. The average size of Tantalum powder, $2-4\mutextrm{m}$, was close to that of the commercial powders($2-5\mutextrm{m}$). Also under this condition, impurities contained in the powder were within the range allowed for the commercial Ta powders.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.5
• /
• pp.666-672
• /
• 2003

Vacuolar degeneration of the gastric epithelial cells is a characteristic feature of the derangement of mucosa where Helicobacter pylori colonizes, and H. pylori vacuolating cytotoxin (VacA) has been suggested to playa key role in it. To elucidate the VacA-involved degenerative mechanism, VacA was purified, and its impact on degeneration of HeLa cells was determined. In the presence of ammonium chloride, cell vacuolation by VacA was dose-and time-dependent, however, no detectable degeneration of the cells was observed with the VacA concentration tested. A further increase of vacuolation was shown in cells pre-treated with diethyl pyrocarbonate (DEPC) , and this resulted in a change of the cell morphology to become spherical. Similar phenomena were also observed when HeLa cells were co-cultivated with intact H. pylori cells. It was remarkable to note that the degree of growth inhibition was proportional to the increase in vacuole formation, suggesting that the vacuolation rate would be critical for cell degeneration. Surprisingly, although VacA was itself inhibited by DEPC, its uptake was markedly increased by this agent, similar to that found in cells with Nabutyrate. These data indicate that the cell's tolerance of VacA transport may be critical for vacuolar degeneration and may be changeable during H. pylori inhabitation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.1014-1017
• /
• 2001

In recent years, The tantalum nitride(TaN) thin-film has been developed for the electronic resistor and capacitor. In this papers, The effect of thermal annealing in the temperature range of 300∼700$^{\circ}C$ on the sheet resistor properties and microistructure of tantalum nitride(TaN) thin-film deposited by RF sputtering was studied. XRD(X-ray diffractometer) and AFM were used to observe electrical properties and microstructrue of the TaN film and sheet resistance. The TCR properties of the TaN films were discussed in terms of annealing temperature, ratio of nitrogen, crystallization and thin films surface morphology due to annealing temperature. The leakage current of the TaN thin film annealed 400 $^{\circ}C$ was stabilized in the study. How its was found that the sheet resistance in the polycrystalline TaN thin film decreased with increasing the annealing temperature above 600 $^{\circ}C$ after sudden peak upen 400 $^{\circ}C$.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.378-382
• /
• 1999

We evaluated the effect of joining process such as contact method, shape of joined area and pressure on the electrical property of Bi-2223 superconducting tape. It was observed that the current capacity was reduced at the transition area of the joined tape and was significantly dependent on the uniaxial pressure. The lap-joined tape, fabricated with a pressure of 1,000-1,600 MPa, show the highest value of current capacity(80-90%) of the tape itself. It is believed the highest value of current capacity results from improvement in core density, contacting area and grain alignment, etc. In addition, the irreversible strain( ${\varepsilon}$ irrev) for the joined tape· was measured to be 0.1%, smaller than that of enjoined tape( ${\varepsilon}$ irrev = 0.3%). The decrease in the strength and irreversible strain for joined tape is believed to be due to the irregular geometry/morphology of the transition area of the tape.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.450-453
• /
• 2010

The electrical/optical properties and surface structures of polypyrrole (PPy) thin films, which were prepared by liquid phase polymerization (LPP) and vapor phase polymerization (VPP) of pyrrole using FTS as an initiatior are compared. The PPy thin film prepared by VPP showed superior surface resistance characteristics as compared with that prepared by LPP. We investigated the relation between surface morphology of PPy film and surface resistance by surface characteristic analysis. The surface of PPy thin film prepared by VPP was smoother than that prepared by LPP. Micro-patterned PPy thin film could be prepared effectively using VPP-combined ink-jet printing and soft lithography.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1969-1972
• /
• 2008

In this study, horse spleen apoferritins were induced to form biominerals using up to 3000 Fe atoms per protein molecule. The morphology and crystallinity of the nanometer-sized biominerals formed in the ferritins were then analyzed using field emission-energy filtering-transmission electron microscopy (FE-TEM). The ferritins were found to have reconstitution yields of 60-70% in the experiments. The mean core size of the ferritins varied somewhat with protein concentrations, indicating that crystal growth in ferritins could be controlled via protein concentrations. The core mineral size increased with the amount of Fe used. Lattice fringes of the core, associated with good crystallinity, were found in all samples. The lattice fringe images of a single domain ferrihydrite mineral appeared frequently in the (011) planes (d-spacing of 0.246 nm) under [100] zone axis in all samples of this study. In addition, the lattice image occasionally revealed fringes corresponding to the (100) planes (d = 0.254 nm) from the [001] zone axis, indicating the characteristic pattern of hexagonal crystal lattice. Diffraction patterns in the minerals identified as ferrihydrite were fitted well into the space group of $P3_{1c}$.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.322-325
• /
• 2006

The nano/microstructure and mechanical properties of the eutectic regions in thixo and rheo cast A356 alloy parts were investigated using nano/micro-indentation and mechanical scratching, combined with optical microscopy and atomic force microscope (AFM).Most eutectic Si crystals in the A356 alloy showed a modified morphology as fine-fibers, however Si particles of network in eutectic region was formed quickly with aging time increase in thixo-cast. The aging responses of the eutectic regions in both the thixo and rheo cast A356 alloys aged at $150^{\circ}C$ for different times (0, 2, 4, 8, 10, 16, 24, 36, and 72 h) were investigated. Both Vickers hardness ($H_V$) and indentation ($H_{IT}$) test results showed almost the same trend of aging curves, the peak was obtained at the same aging time of 10 h.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.327-330
• /
• 2000

The scanning Maxwell-stress microscopy (SMM) is a dynamic noncontact electric force microscopy that allows simultaneous access to the electrical properties of molecular system such as surface potential, surface charge, dielectric constant and conductivity along with the topography. The Scanning near-field optical / atomic force microscopy (SNOAM) is a new tool for surface imaging which was introduced as one application of the atomic force microscope (AFM). Operated with non-contact forces between the optical fiber and sample as well as equipped with the piezoscanners, the instrument reports on surface topology without damaging or modifying the surface for measuring of optical characteristic in the films. We report our recent results of its application to nanoscopic study of domain structures and electrical functionality in organic thin films by SMM. Furthermore, we have illustrated the SNOAM image in obtaining the merocyanine dye films as well as the optical image.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.1
• /
• pp.64-69
• /
• 2011

Super-hydrophobic properties have been achieved on the rf-sputtered polytetrafluoroethylene(PTFE) films deposited on etched aluminum surfaces. The microstructural evolution created after etching has been investigated by FESEM. The water contact angle over $160^{\circ}$ can be achieved on the rf-sputtered ultra-tihn PTFE film less than 10 nm coated on aluminum surface etched with 7 wt.%, 12.5 wt.%, and 15 wt.% HCl concentration for 12 min. XPS analysis have revealed the presence of a large quantity of $-CF_3$ and $-CF_2$ groups in the rf-sputtered PTFE films that effectively can reduce the surface energy of etched aluminum. The presence of patterned morphology along with the low surface energy at the rf-sputtered PTFE coating makes the aluminum surface with high super-hydrophobic property.