• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05a
• /
• pp.41-45
• /
• 2000

As LDPE, widely used as a insulating material of power cable, has defects of treeing and space charge accumulation, various methods to improve them have been suggested. It is difficult to understand the mechanism of electrical conduction according to the complexity of molecular structure and the changes of super-structure due to various environmental parameters. Therfore in this paper, four kinds of heat-treated LDPEs(origin, slow cooled, water cooled, quenched in $LN_2$) were used as specimens to help us understand the mechanisms and space charge distributions were investigated at 60[min] just after applying the field of 1[MV/cm] and 10[min] just after short-circuiting, using LIPP method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.3
• /
• pp.26-33
• /
• 1997

The bacterial celluloses are very different in its physical, chemical and morphological structures compared to wood cellulose. These fibers have many unique properties that are potentially and commercially beneficial. This study was aimed to elucidate the production of bacterial celluloses and to improve their physical properties by chemical pretreatment. Bacterial celluloses produced by static culture had gel-like pellicle structure. The pellicle thickness was increased with the increasing time, and its layer was about 1.8cm after one-month incubation. The pellicles extruded from the cells of Acetobacter had a non-crystalline structure during initial growing stages, gradually getting crystaliyzed with the incubation time elapse, and eventually fumed to the cellulose I crystals. Young＇s modulus of bacterial cellulose sheet was increased with increasing NaOH concentration, and resulted in the highest at 5% NaOH concentration. Similar results with NaClO3 pretreatment can be observed. Too concentrated alkali solutions induced the destruction of cellulose fibrils and changed the mechanical properties of the sheets. These alkaline pretreatment have removed non-cellulosic components(NCC) from the bacterial cellulose, and enhanced inter-abrillar bonding by direct close contact among cellulosic fibrils.

• ALGAE
• /
• v.35 no.1
• /
• pp.1-15
• /
• 2020

Two strains isolated from a subtropical region in China, were morphologically identified as a Nostoc-like species, but its taxonomic identity was unknown. In this study, these two strains were taxonomically and phylogenetically characterized based on polyphasic approach combining morphological and genetic characteristics. Though both were virtually indistinguishable from Nostoc in field and cultured material, these two strains were phylogenetically distinct from Nostoc based on 16S rRNA phylogeny. The 16S-23S internal transcribed spacer rRNA secondary structure of these strains showed the unique pattern of D1-D1', Box-B, and V3 helix, which distinguished them from other Nostoc-like heterocytous genera. A unique cluster separated from Nostoc sensu stricto supports the establishment of Violetonostoc gen. nov. with the type species as Violetonostoc minutum sp. nov.

• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.335-344
• /
• 1998

Percicarp anatomy of Fagophrum was examined on the basis of 12 species and two subspecies to contribute to a better understanding of specific phylogenetic relationship within genus. Examined species have a similar mature pericarp structure, but differences among the species are found with respect to whether or not sclerotic cells are present, and what kind of is the sclerotic cell shape in theexocarp. By the comparisons with pericarp anatomical structure, they are classified into three groups. First clade is composed of F. esculentum , F. esculentum ssp. ancestralis and F. homotropicum ; second clade is consisted of F. tataricum, F. tataricum ssp. potanini and Fl cymosum ; third clade is composed of f. callianthum,F. capillatum, F. gracilipes, F. leptopodum, F.lineare, F. pleioramosum, F.statice and F.urophyllum. The phylogey based on pericarp characters was considerably consistent with ones proposed by previous authors. It also suggested that pericarp characters are useful informatino for deduceing phylogenetic phylogenetic realtionship within geneus Fagopyrum. On the other hand, morphological character evolution indicated that there are tow synapomorphies in genus. There,it was suggested that these species having selfing and homostylous characters are evolved form heterostylous and ourcrossing species.

• The Research Journal of the Costume Culture
• /
• v.29 no.4
• /
• pp.603-615
• /
• 2021

The aim of this study was to analyze the semantic network structure of keywords and the visual composition of images extracted from Instagram in relation to the multi-persona phenomenon with in fashion imagery, which has recently been attracting attention. To this end, the concept of a 'secondary character', which forms a separate identity from a 'main character' on various social media platforms as well as on the airwaves, was considered as the spread of multi-persona and #SecondaryCharacter on Instagram was investigated. 3,801 keywords were collected after crawling the data using Python and morphological analysis was undertaken using KoNLP. The semantic network structure was then examined by conducting a CONCOR analysis using UCINET and Netdraw to determine the top 50 keywords. The results were then classified into a total of 6 clusters. In accordance with the meaning and context of the keywords included in each cluster, group names were assigned : virtual characters, relationship with the main character, hobbies, daily record, N-job person, media and marketing. Image analysis considered the technical, compositional, and social styles of the media based on Gillian Rose's visual analysis method. The results determined that Instagram uses fashion images that virtualize one's face to produce multi-persona representation s that show various occupations, describe different types of hobbies, and depict situations pertaining to various social roles.

• Membrane and Water Treatment
• /
• v.13 no.4
• /
• pp.173-181
• /
• 2022

Polyvinylidene fluoride (PVDF) flat sheet hydrophobic membranes were prepared using 16 wt% PVDF in Dimethyl acetamide (DMAc) by phase inversion technique for desalination application using Membrane Distillation (MD). In this work, the effect of coagulation mediums such as ethanol and water as well their synergistic behavior on the fabricated PVDF membrane morphology was studied using SEM. Moreover, other characteristics required for the membrane distillation applications namely porosity, hydrophobicity and tensile strength were measured using the gravimetric method, sessile drop method and universal testing machine respectively. It was observed that the membrane morphology paradigm shifted from the finger-like structure to the sponge-like structure on increasing the ethanol concentration in coagulant. The porosity of the fabricated membrane was under the required MD range and found to be 57.3% at 16 weight % of PVDF in DMAc solvent under a pure ethanol coagulant bath. Moreover, the top surface contact angle ranges from 85° to 115° on increasing the bath concentration from CBC 0 to CBC 100 at 16 weight % of PVDF in DMAc solvent.

• ALGAE
• /
• v.37 no.2
• /
• pp.135-147
• /
• 2022

The red algal genus Chondrus have long been used as raw materials for carrageenan and dietary fiber in health foods. Despite the importance of genetic information in safeguarding natural seaweed resources, knowledge of the population genetics of Chondrus in the northwest Pacific is limited. In this study, genetic diversity and phylogeographic structure of 45 populations (777 specimens) of Chondrus from Korea, China, and Japan were evaluated based on mitochondrial COI-5P gene sequences, and phylogenetic relationships were confirmed based on plastid rbcL gene sequences. Molecular analyses assigned the specimens in this study to three Chondrus species: C. nipponicus, C. ocellatus, and C. giganteus; phenotype-based species classification was impossible owing to their high morphological plasticity. We found moderate intraspecific genetic diversity and a shallow phylogeographic structure in both for C. nipponicus and C. ocellatus, and low intraspecific genetic diversity in C. giganteus. Each of the three species exhibited high-level intraspecific gene flow among regions based on the most common haplotypes (CN1 for C. nipponicus, CO1 for C. ocellatus, and CG1 for C. giganteus). Our comprehensive genetic information provides insights into the phylogeographic patterns and intraspecific diversity of the economically important Chondrus species. It also highlights the need to conserve existing natural Chondrus resources through continuous monitoring of genetic diversity and phylogeographic pattern.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.121-127
• /
• 2023

In this study, a comprehensive investigation was conducted on the morphological and property changes of laser-induced nanocarbon (LINC) as a function of laser process parameters. LINC was formed on the surfaces of polyimide films with different backbone structures under various process conditions, including laser power, scan speed, and resolution. Three different forms of LINC electrodes (i.e., continuous 3D porous graphene, wooly nanocarbon fibers, line cut) were formed depending on the laser power and scan speed. Furthermore, heteroatom doping induced from the chemical structure of the polyimide during laser patterning was found to be effective in modifying the electrical properties of LINC electrodes. The LINC surfaces exhibited different microstructures depending on the laser beam resolution under constant laser power and scan speed, allowing for controllable surface wettability. The correlation between the chemical structure of the polymer substrate, laser process parameters, and carbonized surface properties in this study is expected to be utilized as fundamental understanding for the manufacturing of next-generation carbon-based electronic devices.

• Korean Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.490-498
• /
• 2012

This study demonstrates the investigation of zooplankton communities (e.g. rotifers, cladocerans and copepods) and environmentally related driving factors (e.g. elevation, area size, water depth, types of dike construction, and bottom substrates). We hypothesized that zooplankton community structure and composition would be influenced by ambient driving forces in different scales of the irrigation ponds (Dumbeong). A total of 66 zooplankton species/groups (56 rotifers, 9 cladocerans, 1 copepods) were found and identified at 45 Dumbeong of Goseong region (i.e. Goseong-gun) in 2011. The rotifers occupied 84.9% of the total zooplankton abundance. We could categorize a clear separation of zooplankton communities into 4 different patterns based on cluster analysis. Zooplankton diversities in Dumbeongs were lower than those in natural ponds or wetlands. In addition, community structure of zooplankton was also simpler and had a broken stick distribution based on SHE analysis. Species composition in each Dumbeong was not significantly discriminated each other. The result of canonical correspondence analysis (CCA) pinpointed that significant influential variables upon zooplankton community were dissolved oxygen percent saturation, pH, and Dumbeong's material. This study indicated that morphological type of the Dumbeong and its water quality could determine the community structure of zooplankton. Furthermore, the connectivity between ambient habitats and materials could be necessary to be rigorously considered in respect to producing the Dumbeongs to subsidize alternative habitats for wetland ecosystem in freshwater landscape.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.68-76
• /
• 1998

In this paper, a new morphological image segmentation algorithm of hierarchical structure by binary split is proposed. It splits a region with the lowest quality into two regions using only two markers having the highest contrast. Therefore, it improves the quality of image with limited regions and reduces contour information which is not sensitive to human visual system, when compared with the conventional algorithm. It is appropriate to PSTN, LAN, and mobile networks, of which the available transmission bandwidth is very limited, because the number of regions can be controlled. And the proposed algorithm shows very simple structure because it doesn't need post processing to eliminate small regions and reduces much computation by using only structuring element of small size at simplification step of each hierarchical structure when compared with the conventional algorithm.