• Journal of Oral Medicine and Pain
• /
• v.26 no.2
• /
• pp.133-146
• /
• 2001

This study was performed to predict the conservative treatment outcome of TMD patients by investigating the prognostic factors ; symptom duration, history of previous treatment, history of previous medication, history of trauma, disability of daily activity, severity of pain, noise, limitation of mouth opening(LOM) and maximum comfortable opening(MCO). Two hundreds and fifty-four subjects were selected for this study among the TMD patients who had visited the Dept. of Oral Medicine BNUH and been treated conservatively with medication, physical therapy, behavioral treatment, and splint therapy from 1991 to 2000. The subjects were divided into two groups improved or unimproved according to the treatment response following six months of conservative treatment. Those who showed less than 1 on NAS for pain, TMJ noise, and opening limitation belonged to the improved group and those who showed more than 2 on NAS belonged to the unimproved group. The two groups were compared with respect to symptom severity, number of diagnosis, history of trauma, previous treatment, previous medication, and disability of daily activity. A prognostic equation with the factors revealed to be significantly related to the prognosis of conservative treatment was obtained. The obtained results were as follows ; 1. In improved group, mean duration of history was 12 months, mean treatment duration of a patient was 4 months an mean number of treatment was about 10 times. In other words, in unimproved group, mean duration of history was 27.4 months, mean treatment duration of patient was 10.5 months and mean number of treatment was 19 times. 2. In unimproved group, multiple diagnosis, chronicity, disability of daily activity were significantly greater than that of the improved group. 3. Patients in unimproved group revealed severe noise at first visit and smaller maximum comfortable opening comparatively. 4. Prognostic factors such as duration of treatment, number of treatment, multiplicity, and chronicity and disability of daily activity showed a significant relation in prediction of improvement. 5. Prognostic equation with significant variables is as follows ; Y = 1.984 - 0.251Noise + 0.068MCO - 0.673Multiplicity. - 0.958Chronicity - 0.065Disability. Classification accuracy of 70.3 %, sensitivity of 71.4% and specificity of 66.7% were shown. 6. Prognostic equation with all factors is as follows : Y = 1.599 - 0.038Pain - 0.256Noise - 0.006Limitation + 0.068MCO - 0.580Multiplicity - 1.025Chronicity - 0.720Disability - 0.329Medication - 0.087Treatment + 0.740Trauma. Classification accuracy of 70.3 %, sensitivity of 73% and specificity of 64.3% were shown. 7. Prognostic value of the improved group with significant factors was $1.0446{\pm}1.0726$ and prognostic value of the unimproved group with significant factors was $-0.013{\pm}1.0146$. Prognostic value of the improved group with all factors was $1.0465{\pm}1.0849$ and prognostic value of the unimproved group with all factors was $-0.057{\pm}1.0611$.

• Restorative Dentistry and Endodontics
• /
• v.41 no.1
• /
• pp.12-21
• /
• 2016

Objectives: To evaluate the effects of three acids on the microhardness of set mineral trioxide aggregate (MTA) and root dentin, and cytotoxicity on murine macrophage. Materials and Methods: OrthoMTA (BioMTA) was mixed and packed into the human root dentin blocks of 1.5 mm diameter and 5 mm height. Four groups, each of ten roots, were exposed to 10% citric acid (CA), 5% glycolic acid (GA), 17% ethylenediaminetetraacetic acid (EDTA), and saline for five minutes after setting of the OrthoMTA. Vickers surface microhardness of set MTA and dentin was measured before and after exposure to solutions, and compared between groups using one-way ANOVA with Tukey test. The microhardness value of each group was analyzed using student t test. Acid-treated OrthoMTA and dentin was examined by scanning electron microscope (SEM). Cell viability of tested solutions was assessed using WST-8 assay and murine macrophage. Results: Three test solutions reduced microhardness of dentin. 17% EDTA demonstrated severe dentinal erosion, significantly reduced the dentinal microhardness compared to 10% CA (p = 0.034) or 5% GA (p = 0.006). 10% CA or 5% GA significantly reduced the surface microhardness of set MTA compared to 17% EDTA and saline (p < 0.001). Acid-treated OrthoMTA demonstrated microporous structure with destruction of globular crystal. EDTA exhibited significantly more cellular toxicity than the other acidic solutions at diluted concentrations (0.2, 0.5, 1.0%). Conclusions: Tested acidic solutions reduced microhardness of root dentin. Five minute's application of 10% CA and 5% GA significantly reduced the microhardness of set OrthoMTA with lower cellular cytotoxicity compared to 17% EDTA.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.403-410
• /
• 2002

Several ways of curing are being tried to improve material's properties and reduce marginal gap. However, all are considering about the pattern of light intensity. It was noted from the preliminary study the change of light wavelength from filter changing may give an impact on material's property and microleakage. The object of this study was to verify the effect of filters with various wavelength width on the microhardness and microleakage of composite resin ; hybrid type of DenFil and submicron hybrid type of Esthet X. Composite resins were cured using 3 kinds of filter; narrow-banded(465-475 nm), mid-banded(430-470 nm), wide-banded(400-500 nm). After the estimation of microhardness. degree of dye penetration and the maximum gap from SEM evaluation were done between 4 groups that showed no difference in microhardness value of the lower surface . The results were as follows : 1 Adequate microhardness could not be gained with a narrow-banded filter irrespective of curing time. At the upper surface, DenFil should be polymerized with middle or wide-banded filter for 20 seconds at least, while Esthet X be col$.$ed with middle or wide-banded filter for 30 seconds at least to get simitar hardness value to control group. 2. There was little dye penetration in enamel margin, but all dentin margins skewed much more dye penetration irrespective of curing conditions. Although there was no statistical difference, groups cured with mid-banded filter for 40 seconds and with wide-width filter for 20 seconds showed relatively less dye penetration. 3. It was revealed from the SEM examination that group cured with wide-banded filter had the smallest gap without statistical significance. Spearman's rho test showed that the correlation between the results of dye penetration and SEM examination was very low. From these results, it could be concluded that curing with wide-width filter would be better than the other techniques, even though the curing technique using mid-width filter seems to have its own unique advantage.

• Nuclear Engineering and Technology
• /
• v.31 no.3
• /
• pp.257-266
• /
• 1999

A simplified statistical methodology is developed in order to both reduce over-conservatism of deterministic methodologies employed for PWR fuel rod internal pressure (RIP) calculation and simplify the complicated calculation procedure of the widely used statistical methodology which employs the response surface method and Monte Carlo simulation. The simplified statistical methodology employs the system moment method with a deterministic approach in determining the maximum variance of RIP The maximum RIP variance is determined with the square sum of each maximum value of a mean RIP value times a RIP sensitivity factor for all input variables considered. This approach makes this simplified statistical methodology much more efficient in the routine reload core design analysis since it eliminates the numerous calculations required for the power history-dependent RIP variance determination. This simplified statistical methodology is shown to be more conservative in generating RIP distribution than the widely used statistical methodology. Comparison of the significances of each input variable to RIP indicates that fission gas release model is the most significant input variable.

• Science of Emotion and Sensibility
• /
• v.5 no.3
• /
• pp.21-28
• /
• 2002

In order to reflect emotion and sensibility of consumers to textile pattern design, the effect of design elements of block stripe pattern on sensitivity was investigated. The stimuli were manipulated with 4 design elements of value difference (3 levels), arrangement (2 levels), width (2 levels) and interval (3 levels). Among the 36 combinations, 27 stimuli, which showed independent sensibility results in the pretest, were adopted as final stimuli. Male and female university students (n=30) evaluated each sensibility subjectively using a questionnaire developed for this study. The effect of design elements on 12 sensibility dimensions drawn by factor analysis and the relationships between the physical quantities of each stimulus and the sensibilities were investigated. As the results of ANOVA for the effect of design elements on sensibility, there were more significant differences in sensibility in the orders of value difference, interval, width, and arrangement. The value difference showed the highest explanatory power. Looking at the sensibility differences according to the level of design elements, the narrower the width of the stripe, the more 'humble', 'clean', 'modern', 'simple', and 'comfortable', and the narrower the interval between stripes, the more 'impressive' and 'conservative' The smaller the value difference, the more 'luxurious', 'modern', 'humble', 'simple', 'soft', and 'clean'. Regression models to predict the 12 sensibilities showed higher values of goodness of fit except 'conservative', 'casual' and 'modern', which were all over 0.6. Based on these results, 2 design prototypes reflecting consumer's sensibility were presented.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.10a
• /
• pp.281-292
• /
• 2001

The evaluation of the allowable bearing capacity is the most important step in the design of a foundation. An accurate evaluation of the effect of all factors such as the physical properties of the soil located beneath the area, the size of the area, the depth of foundation, and the position of the water table is impracticable Therefore, the designer is compelled to estimate the allowable bearing capacity on the basis of simple semiempirical rules under cohesionless soils. This paper deals with semiemperical rules for determining allowable bearing capacity based on observed relations between the results of standard penetration test. Additional comparisions between the results of the theoretical methods and the emperical rules are performed to suggest more conservative design for the engineer.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.261-276
• /
• 1993

The purpose of this study was to evaluate for the cytotoxicity of glass-ionomer cement liners(GC liningcement, Ketac-bond, Vitrebond and Fuji lining LC) on the fibroblasts cultured from human pulp. The fibroblasts were cultured in DMEM-10% FBS medium. The measurement of pH, succinate dehydrogenase (SDH) activity test and $^{51}Chromium$ release test were performed. Viable cell count and $^{14}C$-leucine incorporation rate were evaluated following culture time of 2, 4 and 6 days. The results of this study were as follows : 1. The pH in all cements was to be neutralized as time elapsed, and Fuji lining LC was the lowest pH value among them. 2. SDH activity was more inhibited in GC lining cement and Vitrebond than Ketac-bond and Fuji lining LC with the setting process, and GC lining cement and Ketac-bond were reduced after 5 minute's setting and then elevated as time elapsed. 3. In SDH activity test following exposure time, the activity in Vitrebond, GC lining cement and Fuji lining LC was inhibited with increased exposure time, but it was fairly constant in Ketac-bond. 4. Overall the liquid component was more inhibited than the powder component of glass-ionomer cement in SDH activity test. 5. In $^{51}Cr$-release test, Fuji lining LC was the most released of all the cements tested and followed by : Vitrebond, Ketac-bond, GC lining cement. 6. In viable cell count, the number of cells increased as the culture day proceeded in Ketac-bond, but they decreased in GC lining cement. Fuji lining LC was only observed after 2 days culture and there was not observed the whole culture days in Vitrebond. 7. In $^{14}C$-leucine incorporation rate test, protein synthesis was decreased with the number of culture days in GC lining cement, Vitrebond and Fuji lining LC, but it was followed that of control in Ketacbond.

• Journal of the Korean Home Economics Association
• /
• v.36 no.8
• /
• pp.105-122
• /
• 1998

This research investigated the relationships between families' environment, familism, and the agreement on the parent-child relations as depicted in Korean proverbs to find the change of the traditional values about parent-child relationships. The sample was comprised of 474 Korean married people. They were asked to rate the degree to which they agreed on the underlying value of each proverb. The data were collected through a mailed questionnaire and interview. The findings indicated that the responses of subjects varied as a function of families' environment and familism variables. More specifically, while the subjects living with extended family were more likely to rate the value toward children and daughter high, the subjects from nuclear family were more likely to express the affection toward children, to prefer boys, and to express child-rearing stress. In addition, the people who had lived with grandparents together tended to agree with the value of filial piety. The respondents from conservative surroundings were more likely to express the affection toward children and to prefer boys. The subjects from a rural community tended to prefer boys and to place high value on the authoritative control. The people who supported familism tended to express the affection toward children and child-rearing stress, to prefer boys, and to agree with the filial piety and authoritative control. But they tended to rate low on the value of children and daughter.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.770-780
• /
• 2021

The purpose of this study is to classify customer experience components using Bernd H. Schmitt's Strategic Experiential Modules and explore the relevance between fashion lifestyle and customer experience components. A survey was conducted on 400 adults between the ages of 20s to 50s who had experience in sportswear stores. The results obtained are as follows. First, according to fashion lifestyle, the respondents were divided into an individuality-valued pragmatic group, a trend-oriented brand-seeking group, a fashion-interested group, and a conservative pragmatic group. Second, customer experience components were divided into sensory experience, emotional experience, cognitive experience, behavioral experience, and relational experience. Third, on analyzing the relationship between customer experience and fashion lifestyle, it was found that a fashion-interested group has the highest value in all experiences; therefore, it can be considered that the higher the interest in fashion, the more important is the customer experience. On the other hand, the conservative pragmatic group represented generally smaller values than the other three groups in all customer experiences. Fourth, there were significant differences in the customer experience components that were considered to be important depending on the fashion lifestyle type. An individuality-valued pragmatic group valued cognitive experiences, a fashion-interested group valued all experiences, and a conservative pragmatic group showed low scores in all customer experiences. The results of this study will allow companies to build more customer-friendly experiences and enable consumers to engage in satisfactory purchasing activities through better customer experiences.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.4 no.1
• /
• pp.157-165
• /
• 2003

Low back pain (LBP) is a significant in today's society, with lifetime include factors associated with LBP ar reporter. Among the causes, aberration of posture may play a role in the development of LBP. Many investigators have assessed the curvature of spine in standing posture. But LBP is associated with Lumber Hyperlordosis of Hyperlordosis is controversial Subjects: In conservative treatment(acupuncture, herb med, manipulation & TENS. exercise, potural correction) for a 40 years old woman who had low back pain(V AS) be caused by decrease lumbar lordotic angie. Objectives: The object is change of lumbar lordotic angle of a 40 years old woman who had low back pain with Lumbar hyperlordosis, In conservative treatment. Method: In conservative treatment, We added taping therapy(mechanical correction taping of Kinesio Taping) about Lumbar Lordosis. Conclusion: We experienced a 40 years old woman who had love pack pain with Lumbar hyperlordosis. In conservative treatment, Her pain was Improved by additional taping therapy In company with decrease of Lumbar Lordosis. 1. abnormal spinal curvature, specially lumbar hyperlordosis act on induction & perpetuation agent for low back pain 2. In a patient had low back pain with lumbar hyperlordosis, change of lumbar lordotic angle is of utility value for the effect of treatment and assessment of prognosis. 3. pain control is more relative with change of lumbosacral angle than lumbar lordotic angle, in patient had low back pain with lumbar hyperlordosis. 4. mechanical taping therapy with elastic adhesive tape is effective for patient had low back pain with lumbar hyperlordosis