• KIEE International Transactions on Power Engineering
• /
• v.4A no.2
• /
• pp.69-72
• /
• 2004

Nowadays, one of the serious problems in the KEPCO system is a much higher fault current than the SCC (Short Circuit Capacity) of the circuit breaker. Since superconductivity technology has become more developed, the HTS-FCL (High Temperature Superconductor-Fault Current Limiter) may become an attractive alternative to solving the fault current problem. In order to achieve the best performance, the parameters of HTS-FCL should be designed optimally. Under this setting, this paper presents the optimal design method of parameters for resistive type HTS-FCL using the Monte Carlo technique.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1035-1040
• /
• 2004

In the proto design stage of a new car, the performance of an occupant protection system is often evaluated by CAE instead of the real test. CAE predicts and recommends the appropriate design values hence reducing the number of the real tests. However, the existing researches using CAE in predicting the performances do not consider the uncertainties of parameters, in which inconsistency between the actual test results and CAE exists. In this research, the optimization procedure of a protection system such as airbag and load limiter is suggested for the frontal collision. The DACE modeling known as Kriging interpolation is introduced to obtain the meta model of the system followed by the tabu search method to determine a global optimum. Finally, the distribution of a suggested design is determined through the Monte-Carlo Simulation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.1
• /
• pp.61-69
• /
• 2014

With the extreme ultraviolet (EUV) lithography, the performance limit of chemically amplified resists has recently been extended to 16- and 11-nm nodes. However, the line edge roughness (LER) and the line width roughness (LWR) are not reduced automatically with this performance extension. In this paper, to investigate the impacts of the EUVL mask and the EUVL exposure process on LER, EUVL is modeled using multilayer-thin-film theory for the mask structure and the Monte Carlo (MC) method for the exposure process. Simulation results demonstrate how LERs of the mask transfer to the resist and the exposure process develops the resist LERs.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.801-809
• /
• 2017

The purpose of this study is to assess the additional neutron effective dose during passive scattering proton therapy. Monte Carlo code (Monte Carlo N-Particle 6) simulation was conducted based on a precise modeling of the National Cancer Center's proton therapy facility. A three-dimensional neutron effective dose profile of the interior of the treatment room was acquired via a computer simulation of the 217.8-MeV proton beam. Measurements were taken with a $^3He$ neutron detector to support the simulation results, which were lower than the simulation results by 16% on average. The secondary photon dose was about 0.8% of the neutron dose. The dominant neutron source was deduced based on flux calculation. The secondary neutron effective dose per proton absorbed dose ranged from $4.942{\pm}0.031mSv/Gy$ at the end of the field to $0.324{\pm}0.006mSv/Gy$ at 150 cm in axial distance.

• 한국전기화학회:학술대회논문집
• /
• 2004.06a
• /
• pp.287-292
• /
• 2004

In order to understand the relationship between molecular structure of Metal-Organic Framework(MOF) and capacity of hydrogen absorption, quantum mechanical calculations and grand canonical Monte Carlo simulations have been carried out on a series of MOF-5 having various organic linkers. The calculation results about specific surface area and electron density for various frameworks indicated that the capacity of the hydrogen storage is largely dependent on effective surface area rather than the free volume. Based on the iso-electrostatic potential surface from density functional calculation and the amount of adsorbed hydrogens from grand canonical Monte Carlo calculation, it was also found that the electron localization ground organic linker plays an important role in hydrogen capacity of MOFs.

• ETRI Journal
• /
• v.44 no.3
• /
• pp.504-511
• /
• 2022

Monte Carlo simulations show that, as temperature increases, the average kinetic energy of channel electrons in a GaN transistor first decreases and then increases. According to the calculations, the relative energy change reaches 40%. This change leads to a reduced barrier height due to quantum coupling among the three-dimensional motions of channel electrons. Thus, an analysis and physical model of the gate leakage current that includes drift velocity is proposed. Numerical calculations show that the negative and positive temperature dependence of gate leakage currents decreases across the barrier as the field increases. They also demonstrate that source-drain voltage can have an effect of 1 to 2 orders of magnitude on the gate leakage current. The proposed model agrees well with the experimental results.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.4
• /
• pp.155-167
• /
• 1996

동일한 하천의 용전산소량(DO)을 예측하는 경우에도 사용하는 재포기계수$(K^2)$는 계산하는 공식에 따라 커다란 차이를 나타매며, 부적합한 공식의 사용에 의한 $(K^2)$의 계산은 하천의 수질관리 정책결정에 지장을 초래하므로 현장사정에 적합한 공식의 개발이 필요하다. 이러한 공식의 개발은 많은 현장측정 자료를 사용하도록 신뢰성이 높으나 현장측정은 소요되는 비용에 제약을 받기 때문에 신뢰성과 경제성을 동시에 고려한 표본의 크기의 적정규모를 산정하는 것이 필요하다. 본 연구에서는 Monte Carlo 방법에 의해 통계적으로 수출된 $(K^2)$를 사용해서, 주어진 자료에 의해 개발된 공식을 사용할 때 야기되는 오차가 $(K^2)$개수의 증가에 따라 얼마나 감소하는지를 널리 사용되는 공식 중에 Owen공식과 Churchill공식을 New Jersey에 있는 Passaic River에 적용시켜 검토하였다. 표본의 크기가 10에서 20으로 증가할 때 오차가 크게 감소하였으며 20을 넘어 증가시켰을 때에는 오차의 감소폭이 미미하였다. 초차의 감호형태와 단위측정당 소요되는 비용을 고려할 때 약 20정도의 표본의 크기가 적정수준의 규모에 판단된다. 이러한 적용사례의 결과는 회귀모델의 이론적 계산결과에 의한 오차 감소와 흡사하여 본 연구결과는 여러 가지(K2)공식과 광범위한 하천의 조건에 적용이 가능할 것이며, 본 연구에서 사용한 적정표본의 크기 산정방법은 회귀분석에 의해 실험식을 개발하는 다른 분야에도 적용이 가능하다.

• Fire Science and Engineering
• /
• v.26 no.2
• /
• pp.40-52
• /
• 2012

This paper presents the uncertainty analysis results of fire modeling input parameters for motor control center in switchgear room of nuclear power plants. FDS (Fire Dynamics simulator) 5.5 was used to simulate the fire scenario and Latin Hyper Cube Monte Carlo simulations were employed to generate random samples for FDS input parameters. The uncertainty analysis results of input parameters are compared with those of the model uncertainty analysis and sensitivity analysis approaches of NUREG-1934. The study results show that the input parameter uncertainty analysis approach may lead to more conservative results than the uncertainty analysis and sensitivity analysis methods of NUREG-1934.

• The Journal of Engineering Geology
• /
• v.5 no.2
• /
• pp.155-165
• /
• 1995

Fluid flow studies of fractured rocks require three-dimensional modeling of the fracture system. The stochastic discrete fracture models constructed by Monte Carlo simulation technique were applied to the analysis of groundwater flow and mass transport in fractured rock for the assessment of tightness criteria of underground LPG storage cavern. The parameters that most affect the conceptual discrete fracture modeling proved either fracture orientation or size and on the fract'lre flow interpretation proved conductive fracture intensity. The fracture transmissivity played important role in solute transport in fractured rock simulated by particle tracking approach. It was partly recognized that the calibrated stochastic discrete fracture model can be used for the tightness criteria of underground LPG storage cavern.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.70-76
• /
• 2005

Unlike the large sized generations of transmission system, the distributed generations have complexities in analyzing and determining model. This paper resents an analytical method for the reliability evaluation of distribution system, including the distributed generations. The method using Load Duration Curve model is simpler than the Monte-Carlo Simulation and is more accurate than that using peak load model. The modeling of distributed generation to analysis reliability of customers using LDC is proposed in this paper, and is compared with the MCS method as a result of case studies.