• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.292-302
• /
• 2012

The patient dose in advanced radiotherapy techniques is an important issue. These methods should be evaluated to reduce the dose in diagnostic imaging for radiotherapy. Especially, the Computed Tomography in radiotherapy has been used widely; hence the CT was evaluated for dose and image in this study. The evaluations for dose and image were done in equal condition due to compare the dose and image simultaneously. Furthermore, the possibility of dose and image evaluations by using the Monte Carlo simulation MCNPX was confirmed. We made the iterative reconstruction for low dose CT image to elevate image quality with Maximum Likelihood Expectation Maximization; MLEM. The system we developed is expected to be used not only to reduce the patient dose in radiotherapy, also to evaluate the overall factors of image modalities in industrial research.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.5
• /
• pp.49-56
• /
• 2010

In this paper, we implement a Hadoop based cluster for cloud computing and evaluate the performance of this cluster based on application characteristics by executing RandomTextWriter, WordCount, and PI applications. A RandomTextWriter creates given amount of random words and stores them in the HDFS(Hadoop Distributed File System). A WordCount reads an input file and determines the frequency of a given word per block unit. PI application induces PI value using the Monte Carlo law. During simulation, we investigate the effect of data block size and the number of replications on the execution time of applications. Through simulation, we have confirmed that the execution time of RandomTextWriter was proportional to the number of replications. However, the execution time of WordCount and PI were not affected by the number of replications. Moreover, the execution time of WordCount was optimum when the block size was 64~256MB. Therefore, these results show that the performance of cloud computing system can be enhanced by using a scheduling scheme that considers application's characteristics.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.2 s.18
• /
• pp.211-218
• /
• 2004

In a large owner organization, a program manager of multiple maintenance and remodeling projects has experienced increasing scale and complexity of coordinating the M/R projects with in-house technicians who belong to multiple trade shops. This paper proposes a dual-level hierarchical planning strategy that consists of a program master plan in the long-term horizon and a master construction schedule in an operational scheduling window. A rolling horizon approach to the program master plan is proposed to deal with the external uncertainty of unknown stream of project requests. A resource-constrained scheduling algorithm is developed to generate the master construction schedule in a scheduling window. During development of the algorithm, more emphasis is placed on long-term organizational resource continuity, especially flow management of program constraint resources, than ephemeral events of an individual activity and project. Monte Carlo simulation experiments of three scheduling windows are used to evaluate the relative performance of the proposed scheduling algorithm against three popular scheduling heuristics for resource-constrained multiple projects.

• Journal of Korea Game Society
• /
• v.7 no.2
• /
• pp.21-32
• /
• 2007

It is significant to simulate scattering of light within media for realistic image synthesis; however, this requires costly computation. This paper introduces a practical image-space approximation technique for interactive subsurface scattering. We use a general two-pass approach, which creates transmitted irradiance samples onto shadow maps and computes illumination using the shadow maps. We estimate single scattering efficiently using a method similar to common shadow mapping with adaptive deterministic sampling. A hierarchical technique is applied to evaluate multiple scattering, based on a diffusion theory. We further accelerate rendering speed by tabulating complex functions and utilizing level of detail. We demonstrate that our technique produces high-quality images of animated scenes with blurred shadow at hundreds frames per second on graphics hardware. It can be integrated into existing interactive systems easily.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.255-266
• /
• 2009

In this study, a robust aerospace system design process for the aerospace system is developed by considering the uncertainties of user requirements, manufacturing errors, and operational environment variation. User requirements are analyzed and quantified by decision making models and system engineering methods to select alternative concepts which satisfies the various requirements. Robust design and optimization method is applied to derive the robust solution of the selected system. First, a variance of objective function is calculated, and a mean value and a variance of target value are determined by the deterministic design optimization results of the system. A robust optimum design formulation is then needed to derive the robust solution that minimizes the variance of the response and moves the mean values to the target value. It is applied to Very Light Jet (VLJ) aircraft to which much attention is paid recently in civil aerospace market.

• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.89-97
• /
• 2016

As previous studies to proceed with the evaluation of the radioactive at linear accelerator's shielding concrete wall. And the shielding wall was evaluated the characteristics for the incoming neutron. As a result, the shielding wall is the average amount of incoming neutrons 10 MV 4.63E-7%, 15 MV 9.69E-6%, showed the occurrence of 20 MV 2.18E-5%. The proportion of thermal neutrons of which are found to be approximately 18-33%. The neutron generation rate can be seen as a slight numerical order. However, in consideration of the linear accelerator operating time we can not ignore the effects of neutrons. Accordingly radioactive problem of the radiation shield wall of the treatment room will be this should be considered.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.1 s.34
• /
• pp.37-45
• /
• 1998

The relational database system on fatigue strength was constructed, and the properties of fatigue life distribution were examined to analyze reliability and safety of metallic materials. Data manipulations were efficiently performed in relational fatigue strength database system using dependency diagram. Regardless of the distribution of fatigue strength, the proposed method, the Robust method and the complementary error function method using probability distribution, successfully estimated parameters of the 3-parameter Weibull distribution. The proposed criterion for estimating non-failure probability showed good results regardless of censoring time. The fatigue life distribution function described as a function of parameters of the Weibull distribution and applied stress ratio produced P-S-N characteristics reasonably.

• KIISE Transactions on Computing Practices
• /
• v.21 no.9
• /
• pp.587-595
• /
• 2015

Several fields of science have traditionally demanded large-scale workflow support, which requires thousands of central processing unit (CPU) cores. In order to support such large-scale scientific workflows, large-capacity cluster systems such as supercomputers are widely used. However, as users require a diversity of software packages and configurations, a system administrator has some trouble in making a service environment in real time. In this paper, we present a container-based cluster management platform and introduce an implementation case to minimize performance reduction and dynamically provide a distributed computing environment desired by users. This paper offers the following contributions. First, a container-based virtualization technology is assimilated with a resource and job management system to expand applicability to support large-scale scientific workflows. Second, an implementation case in which docker and HTCondor are interlocked is introduced. Lastly, docker and native performance comparison results using two widely known benchmark tools and Monte-Carlo simulation implemented using various programming languages are presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.10
• /
• pp.747-752
• /
• 2019

By using the failure information and the cumulative test execution time obtained by performing the reliability growth test, it is possible to estimate the parameter of the reliability growth model, and the Mean Time Between Failure (MTBF) of the product can be predicted through the parameter estimation. However the failure information could be acquired periodically or the number of sample data of the obtained failure information could be small. Because there are various constraints such as the cost and time of test or the characteristics of the product. This may cause the error of the parameter estimation of the reliability growth model to increase. In this study, the Bayesian method is applied to estimating the parameters of the reliability growth model when the number of sample data for the fault information is small. Simulation results show that the estimation accuracy of Bayesian method is more accurate than that of Maximum Likelihood Estimation (MLE) respectively in estimation the parameters of the reliability growth model.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.957-964
• /
• 2021

Fluorine-18 used in PET/CT scans is a radioactive isotope that emits positrons, and high energy annihilation gamma rays and beta rays cause exposure to radiation workers. In this study, as part of a plan to reduce the exposure dose of radiation workers working in the Department of Nuclear Medicine, the cause of the low shielding efficiency of Apron for F-18 was identified, and the effectiveness of the Apron double-shielded with acrylic was evaluated. L-Block, Apron+acrylic, Apron, Acrylic+Apron, and Acrylic five shields are used to measure the dose, and the tendencies were compared by performing a Monte Carlo simulation. As a result, it was found that the shielding rate of Apron double shielded with acrylic was about 4 to 8% higher than that of Apron single shielded. To the extent that it does not significantly affect the user's activity, double-shielded personal protective clothing with an appropriate acrylic thickness could help reduce radiation workers' exposure.