• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제18권2호
• /
• pp.177-182
• /
• 2007

This paper presents the InGaP/GaAs HBT differential LC VCO with low phase noise performance for adaptive feedback interference cancellation system(AF-lCS). The VCO is verified with enhanced tank structure including filtering technique. The output tuning range for proposed VCO using asymmetric inductor and symmetric capacitors withlow pass filtering technique is 207 MHz. The output powers are -6.68 including balun and cable loss. The phase noise of this VCO at 10 kHz, 100 kHz and 1 MHz are -102.02 dBc/Hz, -112.04 dBc/Hz and -130.40 dBc/Hz. The VCO is designed within total size of $0.9{\times}0.9mm^2$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제45권12호
• /
• pp.139-145
• /
• 2008

In this paper, a microstrip surface wave antenna(SWA) with a frequency selective surface structure(FSS) is designed and measured. A microstrip SWA has many advantages such as low profile, low weight, easy fabrication, and compatibility with monolithic microwave integrated circuits(MMIC). In addition, it has demonstrated monopole like beam patterns. The microstrip SWA consists of two parts : a center-fed modified microstrip patch to excite surface wave, and a periodic patches to support the propagation of the surface waves. To obtain wide bandwidth, the ring type parasitic element is inserted and the circular patch is selected for the unit element in FSS structure. Experimental results show that the microstrip SWA has monopole like beam patterns at 5.9GHz. Impedance bandwidth and gain is 12% and 5.6dBi.

• Earthquakes and Structures
• /
• 제25권2호
• /
• pp.89-97
• /
• 2023

In order to obtain the impact of socket connection interface forms and socket gap sizes on the seismic performance of reinforced concrete (RC) socket prefabricated bridge piers, quasi-static tests for three socket prefabricated piers with different column-foundation connection interface forms and reserved socket gap sizes, as well as to the corresponding cast-in-situ reinforced concrete piers, were carried out. The influence of socket connection structure on various seismic performance indexes of socket prefabricated piers was studied by comparing and analyzing the hysteresis curve and skeleton curve obtained through the experiment. Results showed that the ultimate failure mode of the socket prefabricated pier with circumferential corrugated treatment at the connection interface was the closest to that of the monolithic pier, the maximum bearing capacity was slightly less than that of the cast-in-situ pier but larger than that of the socket pier with roughened connection interface, and the displacement ductility and accumulated energy consumption capacity were smaller than those of socket piers with roughened connection interface. The connection interface treatment form had less influence on the residual deformation of socket prefabricated bridge piers. With the increase in the reserved socket gap size between the precast pier column and the precast foundation, the bearing capacity of the prefabricated socket bridge pier component, as well as the ductility and residual displacement of the component, would be reduced and had unfavorable effect on the energy dissipation property of the bridge pier component.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제33권2호
• /
• pp.99-104
• /
• 2020

In this study, we fabricated a metamorphic high-electron-mobility transistor (mHEMT) device with a T-type gate structure for the implementation of W-band monolithic microwave integrated circuits (MMICs) and investigated its characteristics. To fabricate the mHEMT device, a recess process for etching of its Schottky layer was applied before gate metal deposition, and an e-beam lithography using a triple photoresist film for the T-gate structure was employed. We measured DC and RF characteristics of the fabricated device to verify the characteristics that can be used in W-band MMIC design. The mHEMT device exhibited DC characteristics such as a drain current density of 747 mA/mm, maximum transconductance of 1.354 S/mm, and pinch-off voltage of -0.42 V. Concerning the frequency characteristics, the device showed a cutoff frequency of 215 GHz and maximum oscillation frequency of 260 GHz, which provide sufficient performance for W-band MMIC design and fabrication. In addition, active and passive modeling was performed and its accuracy was evaluated by comparing the measured results. The developed mHEMT and device models could be used for the fabrication of W-band MMICs.

• Journal of the Korean Vacuum Society
• /
• 제14권4호
• /
• pp.207-214
• /
• 2005

This paper presents a channel structure for promising high performance pseudomorphic high electron mobility transistor(pHEMT) switching device for design and fabricating of microwave control circuits, such as switches, phase shifters, attenuators, limiters, for application in personal mobile communication systems. Using the designed epitaxial channel layer structure and ETRI's $0.5\mu$m pHEMT switch process, single pole double throw (SPDT) Tx/Rx monolithic microwave integrated circuit (MMIC) switch was fabricated for 2.4 GHz and 5 GHz band wireless local area network (WLAN) systems. The SPDT switch exhibits a low insertion loss of 0.849 dB, high isolation of 32.638 dB, return loss of 11.006 dB, power transfer capability of 25dBm, and 3rd order intercept point of 42dBm at frequency of 5.8GHz and control voltage of 0/-3V These performances are enough for an application to 5 GHz band WLAN systems.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.335-338
• /
• 2004

We suggest Q-band MEMS MIMIC (Millimeter wave Monolithic Integrated Circuit) HEMT Oscillator using DAML (Dielectric-supported Airgapped Mcrostrip Line) structure. We elevated the signal lines from the substrate using dielectric post, in order to reduce the substrate dielectric loss and obtain low losses at millimeter-wave frequency. These DAML are composed with heist of $10\;{\mu}m$ and post size with $20\;{\mu}m\;{\times}\;20\;{\mu}m$. The MEMS oscillator was successfully integrated by the process of $0.1\;{\mu}m$ GaAs PHEMTs, CPW transmission line and DAML. The phase noise characteristic of the MEMS oscillator was improved more than 7.5 dBc/Hz at a 1 MHz offset frequency than that of the CPW oscillator And the high output power of 7.5 dBm was measured at 34.4 GHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제43권12호
• /
• pp.40-46
• /
• 2006

Latching optical switches and optical logic gates AND and OR are demonstrated, for the first time, by the monolithic integration of a vertical cavity lasers with depleted optical thyristor structure, which have not only a low threshold current with 0.65mA, but also a high on/off contrast ratio more than 50dB. By simple operating technique with changing a reference switching voltage, this single device operates as two logic functions, optical logic AND and OR. The thyristor laser fabricated using the oxidation process achieved a high optical output power efficiency and a high sensitivity to the optical input light.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제53권11호
• /
• pp.48-55
• /
• 2016

Ambient-light sensor system, which changes the brightness of a display as ambient light change, was studied to reduce the power consumption of the mobile applications such as note PC, tablet PC and smart phone. The ambient-light sensor system should be integrated on a display panel to improve the complexity and cost of mobile applications, so the ambient-light sensor and readout circuit was integrated on a display panel using low-temperature poly-silicon thin film transistors (LTPS-TFT). We proposed the new compensation method to correct the panel-to-panel variation of the ambient-light sensors, without additional equipment. We designed and investigated the new readout circuit with the proposed compensation method and the analog-to-digital converter for the final digital output of ambient light. The readout circuit has very simple structure and control timing to be integrated with LTPS-TFT, and the input luminance ranges from 10 to 10,000 lux. The readout rate is 100 Hz, and maximum differential non-uniformity with 20 levels of the final output below 0.5 LSB.

• The KIPS Transactions:PartD
• /
• 제11D권1호
• /
• pp.203-210
• /
• 2004

A new research of geographic information system has been focused on an open architecture, interoperability and extensibility in their design. In order to process huge data, multidimensional data and heterogeneous geographic format data, these research move away from monolithic system to open structure system managing application layer and user interface layer. Nowadays, many developers have used CORBA middleware for the OGIS systems. However, CORBA middleware has some problems that support only a point-to-point communication and takes a long time to transfer sever data to client. Thus, in this paper, we propose a method on modifying a point-to-point communication and implement the efficient communication method. The proposed method that transfer data from sever to client in one connection support a group communication and reduce a transfer time delay.

• Korean Institute of Interior Design Journal
• /
• 제24권1호
• /
• pp.12-22
• /
• 2015

When it comes to the architecture design, Kuma Kengo rejects a strong and violent subject-centered position and advocates the design that is object-oriented. As can be seen in 'gentle architecture', 'three lows principle', 'natural architecture', and 'connecting architecture', he clearly expresses the objective nature of architecture design in those terms. In this respect, the purpose of this study is to make a close inquiry into the meaning, effect and characteristics of objectivity. In particular, we try to identify the contents of 'impure architecture', which has a clear ambivalence to be an instrumental expression strongly settled in the objectivity, in an aesthetic standpoint. To do that, we systemized the concept of mimesis and the theory of subversive appropriation by Walter Benjamin and Theodor Adorno in to a frame of interpretation. By systemizing translation, subversion, verbalization and the dialectic structure of the aesthetics of negation, we interpreted the features of his works as an objective work and 'impure architecture'. His objectivity leads the situation by subversively appropriating the inherent elements of architectural conditions based on a dialectic solution in which inquiries on logical and scientific materials have played a critical role. Above all, through all these processes, he tried to suggest a language as a new technique for materials and structures. Ultimately, we could find out that this object oriented design sublates a subject oriented way that is monolithic and repetitive regardless of objects. Rather, it is a way that is effective in creating a new way of design by making a different approach to a new object rather unfamiliarly, yet deeply.