• 암석학회지
• /
• 제23권2호
• /
• pp.119-138
• /
• 2014

활화산을 감시하는 방법은 육안으로 직접 관찰하는 방법, 과거의 분화 기록 문건을 참조하는 방법, 직접적으로 관측 장비를 동원하여 화산체를 감시하는 방법 등이 있다. 이 중 관측 장비를 이용하여 화산체를 감시하는 방법 중 가장 기본적인 것은 지진활동도의 감시이며, 이외에도 지진계에 기록된 지진활동 중 인위적인 노이즈를 걸러내는 데 효과적인 공진 관측, 그리고 정밀수준기, 전자거리측정기, 경사계, GPS, InSAR 관측법을 통한 지표변형의 감시, 화산가스 감시, 수문학적/기상학적 감시, 기타 지구물리학적 감시 등의 방법이 있다. 이러한 감시 기법을 통해 화산의 활동을 효과적으로 감시하고 이를 통해 지하 마그마방에서의 마그마 거동을 파악함으로써 미래의 화산 분화를 보다 정확하게 예측하고 조기 경보하여 그에 따른 재해의 피해를 경감하고 최소화 할 수 있다.

• 한국농공학회지
• /
• 제41권2호
• /
• pp.92-103
• /
• 1999

A series of field tests were performed to suggest a rational method for the stability evaluation of soft clay. The behavior of settlement-displacement obtained by field monitoring system was used to compare and analyze with various stability evaluation methods, and to investigate the applicability of the methods for stability evaluation of soft clay. The limit equilibrium method, numerical analysis and field monitoring methods were used to analyze the stability evaluation. The horizontal displacement was abruptly increased when physicla properties of soft clay reached its maximum values and therefore, the values of these properties could be used to the fundamental data for stability evaluation. The evaluation of the stability of clay embankment was suggested to use inclination of ccrve rather than critical line, and the minimum satey factor of 1.2 or larger for natural clay was recommeded . Therefore, the evaluation of short term stability of soft clay could be effectively peformed with the hypefrbolic model and the field monitored data.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.408-417
• /
• 2016

Purpose: Yield monitoring systems are an essential component of precision agriculture. They indicate the spatial variability of crop yield in fields, and have become an important factor in modern harvesters. The objective of this paper was to review research trends related to yield monitoring sensors for grain crops. Methods: The literature was reviewed for research on the major sensing components of grain yield monitoring systems. These major components included grain flow sensors, moisture content sensors, and cutting width sensors. Sensors were classified by sensing principle and type, and their performance was also reviewed. Results: The main targeted harvesting grain crops were rice, wheat, corn, barley, and grain sorghum. Grain flow sensors were classified into mass flow and volume flow methods. Mass flow sensors were mounted primarily at the clean grain elevator head or under the grain tank, and volume flow sensors were mounted at the head or in the middle of the elevator. Mass flow methods used weighing, force impact, and radiometric approaches, some of which resulted in measurement error levels lower than 5% ($R^2=0.99$). Volume flow methods included paddle wheel type and optical type, and in the best cases produced error levels lower than 3%. Grain moisture content sensing was in many cases achieved using capacitive modules. In some cases, errors were lower than 1%. Cutting width was measured by ultrasonic distance sensors mounted at both sides of the header dividers, and the errors were in some cases lower than 5%. Conclusions: The design and fabrication of an integrated yield monitoring system for a target crop would be affected by the selection of a sensing approach, as well as the layout and mounting of the sensors. For accurate estimation of yield, signal processing and correction measures should be also implemented.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.598-601
• /
• 2007

Urban growth management is essential for sustainable urban growth. Monitoring physical urban built-up area is a task of great significance to manage urban growth. Detecting urbanized area is essential for monitoring urbanized area. Although image classifications using satellite imagery are among the conventional methods for detecting urbanized area, they requires very tedious and hard work, especially if time-series remote sensing data have to be processed. In this paper, we propose an effective urbanized area detecting method based on normalized difference vegetation index (NDVI) and normalized difference built-up index (NDBI). To verify the proposed method, we extract urbanized area using two methods; one is conventional supervised classification method and the other is the proposed method. Experiments shows that two methods are consistent with 98% in 1998, 99.3% in 2000, namely the consistency of two methods is very high. Because the proposed method requires no more process without band operations, it can reduce time and effort. Compared with the supervised classification method, the proposed method using vegetation indices can serve as quick and efficient alternatives for detecting urbanized area.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1132-1141
• /
• 2019

Steel-concrete-steel (SCS) sandwich structures have important advantages over conventional concrete structures, however, bond-slip between the steel plate and concrete may lead to a loss of composite action, resulting in a reduction of stiffness and fatigue life of SCS sandwich structures. Due to the inaccessibility and invisibility of the interface, the interfacial performance monitoring and debonding detection using traditional measurement methods, such as relative displacement between the steel plate and core concrete, have proved challenging. In this work, two methods using piezoelectric transducers are proposed to detect the bond-slip between steel plate and core concrete during the test of the beam. The first one is acoustic emission (AE) method, which can detect the dynamic process of bond-slip. AE signals can be detected when initial micro cracks form and indicate the damage severity, types and locations. The second is electromechanical impedance (EMI) method, which can be used to evaluate the damage due to bond-slip through comparing with the reference data in static state, even if the bond-slip is invisible and suspends. In this work, the experiment is implemented to demonstrate the bond-slip monitoring using above methods. Experimental results and further analysis show the validity and unique advantage of the proposed methods.

• Korean Chemical Engineering Research
• /
• 제46권2호
• /
• pp.233-247
• /
• 2008

공정 모니터링 기술은 공정 내에서 일어나는 예상치 못한 조업변화 및 이상을 조기에 감지하고 조업 이상에 영향을 끼친 근본 원인을 밝혀내어 제거해 줌으로써 공정의 안정적인 조업과 양질의 제품생산의 기반을 제공하여 준다. 데이터에 기반한 통계적 공정 모니터링 방법은 양질의 공정 데이터만 주어진다면 통계적 처리를 접목하여 비교적 쉽게 모니터링을 할 수 있고 공정의 데이터 분석에 이용할 수 있는 도구를 얻을 수 있다는 장점이 있다. 그러나 실제 공정에서는 비선형성, non-Gaussianity, 다중 운전모드, 공정상태변화로 인해 기존의 다변량 통계적 방법을 이용한 공정 모니터링 기법은 비효율적이거나, 공정 감시 성능의 저하, 종종 신뢰할 수 없는 결과를 야기한다. 이러한 경우 기존의 방법으로는 더이상 공정을 정확히 감시할 수 없기 때문에 최근에 많은 새로운 방법들이 개발 되었다. 본 총설에서는 이러한 단점을 보안하기 위해 최근 주목할 만한 연구결과인 공정 비선형성을 고려한 커널주성분분석(kernel principle component analysis) 모니터링 기법, 주성분분석 모델 조합을 이용한 다중모델(mixture model) 모니터링 기법, 공정 변화를 고려한 적응모델(adaptive model) 모니터링 기법, 그리고 센서 이상진단과 보정의 이론과 응용결과에 대하여 소개한다.

• 상하수도학회지
• /
• 제23권1호
• /
• pp.77-87
• /
• 2009

In existing systems, the best method inhibiting corrosion control in water distribution systems is to reduce water corrosiveness. Water corrosion can be decreased by controlling water quality through simple water treatment in treatment plants. On this research, we study the characteristics of tab water qualities in domestic areas, assessment of corrosive water quality and the method of water quality monitoring. This review presents the method of water quality monitoring which is the most applicable. Monitoring for corrosion control in waterworks system is the most proper method; It can prevent serious accidents economically and reduce civil appeals. Surely we should assess corrosive water quality in tab water, and introduce water treatment methods to control corrosive water quality before monitoring for corrosion. According to a lot of researches, it has been proved that simple water treatments can reduce the pipe corrosion. In this review we should indicate that we do not control of the corrosive water quality due to domestic conditions, we should monitor the water quality basically. Therefore, we recognize how the existing water quality can cause problems on pipeline corrosion, how to deal with it. Then it will be possible to apply water quality monitoring for corrosion control in water distribution system. Monitoring for corrosion control can be expressed by LI index, it is already known in literatures. This review presents more simple method than existing methods than existing ones we expect to apply these methods to SCADA in the future.

• 한국지반환경공학회 논문집
• /
• 제16권5호
• /
• pp.43-53
• /
• 2015

본 연구에서는 빅데이터 범주에 포함되는 각종 계측 데이터를 대상으로 각종 이상치를 판단하기 위한 기법을 고안하고, 인공 데이터 및 실 계측 데이터를 이용한 이상치 분석을 수행하였다. 계측결과에 대한 1차 차분 값 및 오차율을 적용한 규칙기반 방법은 큰 규모의 Short fault 분석 및 일정 기간 계측값에 변화가 발생하지 않는 경우의 Constant fault 분석에 효과적으로 적용될 수 있었으나, 독립적인 단일 데이터셋만을 이용하는 관계로 큰 변화폭을 보이는 실 계측 데이터의 정상 데이터를 이상치로 오판하는 문제점이 있었다. 규칙기반 방법을 이용한 Noise fault 분석은 적정 데이터 윈도우 사이즈의 선택 및 이상치 판정용 한계값 선정상의 문제로 인해 실 계측 데이터 적용에 한계가 있었다. 이종 데이터 간 상관분석 방법은 학습 데이터의 적정범위 선정이 선행된다면 장단기 계측 데이터의 이상 거동 및 국부적 이상치 판정에 매우 효과적으로 이용될 수 있음을 알 수 있었다.

• International Journal of Safety
• /
• 제8권1호
• /
• pp.18-23
• /
• 2009

Due to dermal exposure to hazardous chemicals causing potential adverse health symptoms through skin absorption, dermal monitoring has had an important role in assessing such exposure. This paper overviews comparatively a number of studies of dermal monitoring with different methodologies such as surface monitoring, skin wiping, skin washing, adhesive methods and tape stripping, fluorescence and infrared spectroscopy, skin patches, pads and clothing, video exposure monitoring and dermal exposure assessment toolkits and models. However, there is a lack of information on the relationship between exposure levels and adverse health symptoms. Therefore, more specific strategies for dermal exposure monitoring should be developed and standardized with further development of biological and ocular monitoring.

• 제어로봇시스템학회논문지
• /
• 제9권3호
• /
• pp.242-250
• /
• 2003

We propose the monitoring system scheme for the CPS/INS integrated navigation system. The design requirements of the monitoring system are suggested and the software scheme based on GUI is proposed. The proposed monitoring system consists of an I/O interface part, a navigation data display part, and a post-processing part. The I/O interface part is responsible for data communication between the monitoring system and a navigation computer unit. The navigation data display part provides various display methods to show the navigation data to user in real-time. The post-processing part collects the navigation data to analyze the performance of navigation system. The proposed monitoring system software was developed using the Visual C++ programming language and a van test was carried out to demonstrate the real-time operation of the monitoring system. The test result shows that the proposed monitoring system can be effectively applied to the CPS/INS integrated navigation system.