• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.330-335
• /
• 2009

A fiber-optic liquid level sensor based on bending cantilever beam has been proposed. A fiber Bragg grating(FBG) embedded in the cantilever beam is used to sensing elements. The basic concept is elongation and constriction of the FBG corresponding to the liquid level variation. The best FBG position on the cantilever for obtaining the high sensitivity was 4 cm from the fixing point. When the liquid level moves up and down vertically, the Bragg wavelength is linearly shifted. But, the wavelength sensitivity of the FBG installed on the upper side of cantilever was four times better than that of the FBG equipped in the lateral side due to the difference of unit strain applied to the FBG. Intensity demodulation using the low-cost edge filter is used to interrogate the Bragg wavelength through converting the wavelength signals into the optical intensity ones. Experiment results show that the electrical output is exponentially proportional to the liquid level. But, it should be overcome for applying to the ships.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.2122-2122
• /
• 2001

The ultra-high pressure technology fur the preservation of foods is under intense research to evaluate its potential as an alternative or complementary process to traditional methods of food preservation. Traditional processing methods usually need a large amount of energy, may cause unwanted reactions in the food, leading to cooked flavor and loss of vitamins, etc. The application of ultra-high hydrostatic pressure for food processing consists of subjecting the food to pressures in the range of 100-1000 ㎫. The ultra-high pressure inactivates the microorganisms and some enzymes, promotes the germination of spores and extends the shelf-life of the foods. This new technology follows the “minimal processing” concept minimizing the quality degradation, saving the vitamins, essential nutrients and flavors as well as utilizing less energy. We joined the research team at our University involved in the mentioned technology using an ultra-high pressure equipment, recording of the near infrared spectra and signal response of a chemosensor array (electronic nose) of their meat (beef and pork), vegetable and fruit samples exposed to different pressure. The results of our investigations achieved by evaluating the measured data using PCA and PQS methods will be presented.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.52-55
• /
• 2004

VMS (virtual manufacturing system) may be defined as a transparent interface/control mechanism to support human decision-making via simulation and monitoring of real operating situation through modeling of all activities in RMS (real manufacturing system). The three main layers in VMS are business process layer, manufacturing execution layer, and facility operation layer, and each layer is represented by a specific software system having its own input modeler module. The current version of these input modelers has been implemented based on its own 'local' framework, and as a result, there are no information sharing mechanism, nor a common user view among them. Proposed in this paper is a unified modeler framework covering the three VMS layers, in which the concept of PPR (product-process-resource) model is employed as a common semantics framework and a 2D graphic network model is used as a syntax framework. For this purpose, abstract class PPRObject and GraphicObject are defined and then a subclass is inherited from the abstract class for each application layer. This feature would make it easier to develop and maintain the individual software systems. For information sharing, XML is used as a common data format.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.2
• /
• pp.72-76
• /
• 2003

This paper presents the design concept and operation results of float-off for FSO (340,000 DWT Class, ELF AMENAM KPONO Project) built on the ground, without dry dock facilities. It was the first attempt to build FSO, completely, on the ground and launch it using DBU (Double Barge Unit, which was connected by rigid frame structure.) The major characteristics of FSO, which are similar to general VLCC type hull, including topside structure, weigh 51,000 metric ton. In order to have sufficient stability during the deck immersion of DBU, while passing through a minimum water plane area zone, proper trim control was completed with LMC (Load Master Computer). The major features of the monitoring system include calculation for transverse bending moment, shear force, local strength check of each connector, based on component stress, and deformation check during the load-out and float-off. Another major concern during the operation was to avoid damages at the bottom and sides of FSO, due to motion & movement after free-floating; therefore, adequate clearances between DBU and FSO were to be provided, and guide posts were installed to prevent side damage of the DBU casings. This paper also presents various measures that indecate the connector bending moment, damage stability analysis, and mooring of DBU during float off.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1213-1219
• /
• 2012

As Korea is expected to enter an aging society in near future, the number of patients who need a long-term prescribtion is expected to increase as well. In particular, Korea shows the highest in both the incident rate and the death rate among OECD member nations. The current situation requires more strict monitoring and management for patients' taking medicine, there are a few practical problems such as personnel expenses. Recently the concept of directly observed treatment (DOT) that is based on the IT technologies has been introduced. This paper, therefore, proposes a digital DOT system with a smart pillbox and drives key requirements for the smart pillbox that plays an important and essential role in the proposed digital DOT system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.383-385
• /
• 2012

Confined Disposal Facilities(CDF) are an effective and commonly used management option for contaminated dredged material. CDF is an engineered contstruction for containment of contaminated dredged material to control potential releases to the environment. Although the concept is simple, constructing a CDF is a complex and non-standard process. In the process of planning a CDF, many different fields of expertise have to be considered, such as civil engineering, landscaping, chemistry, legislation, social impact, and environmental engineering. This paper provides the concise overview of common guidance on CDF.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.2
• /
• pp.125-138
• /
• 2020

One of the most important steps to consider in utilizing micro-satellites for surveillance or reconnaissance operations is the design of the satellite constellation. The Walker-Delta constellation which is commonly used in designing satellite constellations is not ideal for this operation in which military satellites are required to monitor specific regions continuously in a stable manner. This study aims to discuss the methodology for designing a satellite constellation that is capable of monitoring the fixed region at the fixed time each day by using the Sun synchronous Orbit. The BB(Beach Ball) constellation that we propose outperforms the Walker-Delta constellation in terms of robustness and it holds the merit of being simple in its design, thereby making future expansions more convenient. We expect the BB constellation will have a high applicability as the operational concept of military surveillance satellites is established in the near future.

• Journal of Korean Society for Quality Management
• /
• v.30 no.3
• /
• pp.120-138
• /
• 2002

In order to carry out TQM and 6 Sigma management, it is the key elements to make clear a goal and a mission. Above all, we can succeed In achieving a dramatic change and a great outcome only when we make clear the method, incentives, organization and plans under the clear objective. In order to secure the competitiveness against the external challenge, it is essential to keep the several crucial factors such as CEO's will, the systematic process to measure and manage, monitoring to satisfy customer's needs and an aggressive development of TQM activity to encourage the endeavour of the relentless enhancement, and also a positive effort Is to be made for evaluating all quality culture like training experts internally by an outstanding training program under CEO's firm leadership. This study is carried out to understand that which features and factors of success can exist in a company culture if a company accepts a theoretical basis and concept, the general of TQM and 6 Sigma which are one of a management strategy, and carries out TQM and 6 Sigma for achieving improvement of quality and customer's satisfaction.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.21 no.1
• /
• pp.1-11
• /
• 2018

The emergence of mucosal healing as a treatment goal that could modify the natural course of Crohn's disease and the accumulating evidence showing that biologics are most effective in achieving mucosal healing, along with the success of early treatment regimens for rheumatoid arthritis, have led to the identification of early Crohn's disease and development of the concept of catching the therapeutic window during the early disease course. Thus, an increasing number of pediatric gastroenterologists are adopting an early biologic treatment strategy with or without an immunomodulator. Although early biologic treatment is effective, cost and overtreatment are issues that limit its early use. Currently, there are insufficient data on who will benefit most from early biologics, as well as on who will not need early or even any biologics. For now, top-down biologics should be considered for patients with currently known high-risk factors of poor outcomes. For other patients, close, objective monitoring and accelerating the step-up process by means of a treat-to-target approach seems the best way to catch the therapeutic window in early pediatric Crohn's disease. The individual benefits of immunomodulator addition during early biologic treatment should be weighed against its risks and decision on early combination treatment should be made after comprehensive discussion with each patient and guardian.

• School Mathematics
• /
• v.15 no.4
• /
• pp.867-888
• /
• 2013

The purpose of this paper was to investigate mathematics gifted educational methods based on STEAM education by Delphi study. As a result by total 3 round Delphi method, the concept of STEAM education for mathematics gifted students was education of developing capacity of Holistic Growth that can communicate diverse people through self-monitoring study as they can find and solve problems with integrative thinking and creative thinking. Thus this elicited the consensual agreements of experts about mathematics gifted educational goals, methods, contents, and evaluations etc. As a follow-up research will be developed mathematics gifted educational model based on STEAM education.